American Audio Microphone WMUHF16 User Manual

WM UHF16
User Guide
4295 Charter Street
Los Angeles Ca. 90058
                          (323) 582-2650
                   Fax (323) 582-2610
 web:   www.AmericanAudio.us
16 Channel Selectable UHF Wireless Microphone
Rev. 4/05 

©American Audio®   -   www.americanaudio.com   -   WM UHF16™ Instruction Manual Page 2
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle is
intended to alert the  user  to the  presence  of important
operating  and maintenance  (servicing) instructions  in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated "dangerous voltage"...

Every WM UHF16™ has been thoroughly tested 
and has been shipped in perfect operating con
-
dition.  Carefully  check  the  shipping  carton  for 
damage  that  may  have  occurred  during  ship
-
ping.  If  the  carton  appears  to  be  damaged, 
carefully  inspect  your  wireless  microphone  for 
any damage and be sure all equipment neces
-
sary  to  operate  the  wireless  microphone  has 
arrived  intact.  In  the  event  damage  has  been 
found  or  parts  are  missing,  please  contact  our...

Introductions: Congratulations  and  thank  you  for  purchasing  the  American  Audio®  WM  UHF16™ 
wireless  microphone.  This  wireless  microphone  is  a  representation  of  American  Audio’s  continuing 
commitment to produce the best and highest quality audio products possible at an affordable price. 
Please read and understand this manual completely before attempting to operate your new wireless 
microphone.  Please  carefully  read  and  understand  the  instructions  in  this  manual...

©American Audio®   -   www.americanaudio.com   -   WM UHF16™ Instruction Manual Page 5
   WM  UHF16™                           RECEIVER CONTROLS AND FUNCTIONS
1.  Antenna - Receives RF signals from the transmitter.
2.  Balanced XLR Output -  This balanced XLR output can be used to connect the receiver to bal-
anced input of mixer or amplifier. 
3.  Unbalanced 1/4” Output - This unbalanced output can be used to connect the receiver to the 
aux-level input of a mixer or amplifier.
4.  12v DC Input - Connect...

©American Audio®   -   www.americanaudio.com   -   WM UHF16™ Instruction Manual Page 6
Transmitter Set Up
1. Unscrew the bottom part of the microphone. The battery connections (12) are located inside of the    
    microphone. 
2. Insert and connect a fresh 9v battery to the battery connections.
3. Screw the bottom of the microphone back into place.
Receiver Set Up
1. Plug the included AC power supply into the DC input connector on the back of the receiver.
2. Plug the other end of the AC power supply...

©American Audio®   -   www.americanaudio.com   -   WM UHF16™ Instruction Manual Page 7
   WM  UHF16™                                                                 OPERATION
Operating Instructions
1.  Select the channel frequency, make sure the receiver and transmitter are set to the same     
     channel. 
2.  Switch the receiver and transmitter power button to the “
ON” position. If the signal from the    
     transmitter is being received by the receiver the AF LED should light up. 
     Note:...

©American Audio®   -   www.americanaudio.com   -   WM UHF16™ Instruction Manual Page 8
1-YEAR LIMITED WARRANTY
A.  American  Audio®  hereby  warrants,  to  the  original  purchaser,  American  Audio®  products  to 
be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) 
from the date of purchase. This warranty shall be valid only if the product is purchased within the 
United States of America, including possessions and territories. It is the owner’s...

©American Audio®   -   www.americanaudio.com   -   WM UHF16™ Instruction Manual Page 9
GENERAL Model: American Audio® WM UHF 16 - Wireless Microphone
System:  Single Channel UHF Wireless Microphone System
Dimensions:   3 1/4” ~ 4 1/2” H x 8 1/2” W x 10 3/8” L
Installation:                          Place on flat surface or mount in flat case
Weight:  5.3 Lbs. / 2.4 kgs  
Power supply:  DC 12V - 18V / AC 115v/230v, 50/60Hz  
Power consumption:  14W  
Environmental conditions:  Operational temperature:  5...