Home
>
American Water Heater
>
Water Heater
>
American Water Heater Common Vent Kit for HCG3 Series User Manual
American Water Heater Common Vent Kit for HCG3 Series User Manual
Here you can view all the pages of manual American Water Heater Common Vent Kit for HCG3 Series User Manual. The American Water Heater manuals for Water Heater are available online for free. You can easily download all the documents as PDF.
Page 11
11 Supports - You will need enough supports so that you can install one every 3 feet of horizontal run and every 5 feet of vertical run for both the inlet and vent pipe. Supports may be field supplied metal strapping or equivalent. Condensate Drain - Each water heater must have a separate condensate drain line running to an open drain. Follow the directions in the water heater’s Instruction Manual. Do not use a common condensate drain line for multiple heaters. INSTRUCTIONS Physical Layout -...
Page 12
![Page 12
12
The general instructions for penetrating the side wall are found in the Side Wall Terminations sections of the
water heater’s Instruction Manual. The common vent system may not be used with concentric or low profile vent
terminals. All pipe and terminations that are outside the structure should be UV pr\
otected (black) parts.
For each penetration, cut a 7” diameter hole through the structure. First, attach the final termination for the air
intake to its final straight pipe. Outside the building,...](http://img.usermanuals.tech/thumb/388/5731/w300_common-vent-kit-for-hcg3-series-1478789342_d-11.png "Page 12
12
The general instructions for penetrating the side wall are found in the Side Wall Terminations sections of the
water heater’s Instruction Manual. The common vent system may not be used with concentric or low profile vent
terminals. All pipe and terminations that are outside the structure should be UV pr\
otected (black) parts.
For each penetration, cut a 7” diameter hole through the structure. First, attach the final termination for the air
intake to its final straight pipe. Outside the building,...")
12 The general instructions for penetrating the side wall are found in the Side Wall Terminations sections of the water heater’s Instruction Manual. The common vent system may not be used with concentric or low profile vent terminals. All pipe and terminations that are outside the structure should be UV pr\ otected (black) parts. For each penetration, cut a 7” diameter hole through the structure. First, attach the final termination for the air intake to its final straight pipe. Outside the building,...
Page 13
13 INLET AIR SIDE Adapter to inlet - The male end of the air inlet adapter (See Figure 6) is inserted into the water heater air inlet (a PVC coupling). It is held in place with the connector adapter supplied in this kit. A 90° elbow is inserted into the female end adapter to turn the system in a vertical direction. Straight pipe to tee - A straight pipe section is used to run from the elbow to the bottom of the tee. The length may be adjusted so that the height to the center line of the horizontal run...
Page 14
14 NOTES 0036004800550059004C0046004C0051004A00030056004B00520058004F0047000300520051004F005C000300450048000300530048005500490052005500500048004700030045005C000300440003003400580044004F004C00BF0048004700030036004800550059004C004600480003
Page 15
15 NOTES 0036004800550059004C0046004C0051004A00030056004B00520058004F0047000300520051004F005C000300450048000300530048005500490052005500500048004700030045005C000300440003003400580044004F004C00BF0048004700030036004800550059004C004600480003
Page 16
For additional information contact:
1-800-527-1953
www.hotwater.com
332199-001
Page 17
3RXUGHSOXVDPSOHVLQIRUPDWLRQVFRQWDFWHU
ZZZKRWZDWHUFRP
332199-001
Page 18
15/ HQWUHWLHQQHGHYUDLWrWUHHIIHFWXpTXHSDUXQWHFKQLFLHQGHVHUYLFHTXDOL¿p NOTES
Page 19
/ HQWUHWLHQQHGHYUDLWrWUHHIIHFWXpTXHSDUXQWHFKQLFLHQGHVHUYLFHTXDOL¿p NOTES
Page 20
13/ HQWUHWLHQQHGHYUDLWrWUHHIIHFWXpTXHSDUXQWHFKQLFLHQGHVHUYLFHTXDOL¿p CÔTÉ ENTRÉE D’AIR $GDSWDWHXU j HQWUpH