Amptron Educational Equipment Equipment Racking Systems User Manual

							EDUCATIONAL EQUIPMENTP O Box 137  Parow   7499 Bellville  7530  27 21 9300929 / 32  27 21 9300934Fax:E-mail:[email protected] site:Tel:Unit  8  Boulevard Park 
                   Off Boulevard Drive
Cape Town MPTRONAELECTRONICS (Pty) LtdREG. NO: 79/02792/07 
						

							AC SUPPLYRated input voltage        220/230 V AC
Rated input current        5 A
Line frequency               50-60 Hz
COMPONENTS1.2 K W isolating transformer with the following input taps 
210, 220 and 230 volt AC. 
COOLING                220 v 120 square fan
AC OUTPUT
Variac                              1.2 kW, 0 - 220 V AC 
Rated output voltage     0 220 V AC
Rated output current     5 A
DC OUTPUT
Rated output voltage      0 - 220 V DCRated output current      5 A
bridge rectifier                35 A 1200V DC
Capacitance  10000 micro farad 250 V
PROTECTION Mains                        2 pole Hager 5 amp D curve MCB
Primary fuse      5 Amp fuse
Secondary         5 Amp fuse
DC fuses            1 x 5 Amp fuse Negative
                            1 x 5 Amp fuse positive
                                                           SPECIFICATIONS220 VOLT AC/DC POWER SUPPLY 
						

							SPECIFICATIONSAC SUPPLYCOMPONENTS
  8 x Inductors              0.01 H at 50 Hz
  8 x Power resistors   1.5 Ohm 50 Watt
12 x Capacitors          16m Farad 450 V                                          COOLING                         220 v 120 square fan
PROTECTION Capacitor discharge resister built in
Fan                                   125 mA fuse
                                                           Rated input voltage        380 V AC 5 wire system
Rated input current        3 A
Line frequency               50-60 Hz
COMPONENTS
3 x 600 W isolating transformer with the followinginput  taps  210, 220 and 230 volt V AC. 
Total power consumption:  3 x 600 W = 1.8 K W
AC OUTPUT
Rated output voltage  60, 110, 170, 220 and 380V
Rated output current  3 Amp
COOLING                220 v 120 square fan
Out going mains    3 x chassis mount socketsOn/Off illuminated latching contactor
PROTECTION 
Mains                3 pole M&G 3 amp D curve MCBMains incoming   3 x 3 Amp fuses
Mains out going   1 x 5 amp fuse                                                           SPECIFICATIONSLINE SIMULATORLINE SIMULATOR       THREE PHASE POWER SUPPLY 
SINGLE PHASE TRANSFORMER TRAINER        THREE PHASE POWER SUPPLY 
       SINGLE PHASE TRANSFORMER        TRAINER 
						

							RLC PANELSPECIFICATIONSAC SUPPLYAC SUPPLYRated input voltage        220 VAC
Rated input current        125 mALine frequency                50-60 Hz
COMPONENTSVariable inductor              400 mH at 50 Hz
Variable power resistor   100 Ohm 500 Watt
Capacitors                        selectable  in 1 m Fd                                          steps to 60 m Farad                                          450 V maximumCOOLING                         220 v 120 square fan
PROTECTION
 Capacitor discharge resister built inVariable inductor            2.5 A fuse
Var power resistor          2.5 A fuse
Fan                                   125 mA fuse
                                                           Rated input voltage        380 V AC 5 wire system
Rated input current        5 A
Line frequency               50-60 Hz
COMPONENTS1 x 380 V 3 K W multi tap transformer with taps 
at0, 12, 24, 48, 60, 120 and 220 volt. Can be connected star to star, delta to delta, star delta
and delta starCOOLING                220 v 120 square fanOut going mains    3 x chassis mount socketsthermocouples  embedded in transformer coreOn/Off illuminated latching contactorfan defeat switchPROTECTION 
Mains                3 pole M&G 5 amp D curve MCB
Mains incoming   3 x 5 Amp fuses
Mains out going   1 x 5 amp fuse                                                           SPECIFICATIONSRLC PANELTHREE PHASE MULTI TAP 
TRANSFORMER TRAINERTHREE PHASE MULTI TAP 
TRANSFORMER TRAINER 
						

							SPECIFICATIONS
The Star Delta Motor control Panel has been designed to operate with both 380V 
and 220V motors. The components are rated as follows:
CIRCUIT BREAKER: Triple pole 10A D curve motor breaker.
MAIN FUSES: 10A fuses.
FUSE CARRIDGE HOLDER: 16A heavy duty.
BINDING POSTS: 20A continuous rating
TIMER AND CONTACTOR COILS: 220V 50Hz
RELAYS COIL: 24V DC   
TIMER AND CONTACTOR CURRENT RATING: 9A  at AC3 rating 
                                                                                  25A at AC1 rating
RELAY CURRENT RATING: 5A 
TIMER DURATION: 0 to 30 seconds
OVERLOAD SETTING: 2,5 Amps to 4 AmpsSTAR DELTA MOTOR CONTROL TRAINER 
						

							AC SUPPLYRated input voltage        220/230 V AC
Rated input current        300 mALine frequency               50-60 Hz
COMPONENTS60 Va isolating transformer with variac
AC OUTPUT
Rated output voltage     0 - 30 V AC
Rated output current     2 A
PROTECTION 
Mains                   FusedSecondary          Fuse on each tap
                
                                           SPECIFICATIONS15-0-15 VOLT AC POWER SUPPLY 
						

							EQUIPMENT RACKING SYSTEMSBUILT TO SUIT CLIENTS INDIVIDUAL 
 NEEDSBuilt to suit clients individual needs. With side  
rails, Equipment can be positioned in any manner. This system eliminates space problems and keep 
student together in a workable group.Old an new equipment can be used together verycost effectively in the system with great results.When a piece of current equipment in the racking system become obsolete simply that piece of equipment need changing with minimum costing for brackets etc.