Anaheim Brushless DC BLWR23MDA Series Users Guide
View the Anaheim Brushless DC BLWR23MDA Series Users Guide for free. All the Anaheim manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
General Description
The BLWR23MDA Series is a compact construction that implements a DC Brushless controller and a DC
Brushless motor in one streamline package. With the two parts combined into one casin\
g, the need to wire
up the motor has been eliminated. The DC Brushless controller operates off 24VDC. The high-speed DC
Brushless motor can operate at 4000RPM, can generate up to 60 oz-in of c\
ontinuous torque, and deliver
as much as 180W, with the BLWR23MDA5 offering. Using hall sensor feedback,...](http://img.usermanuals.tech/thumb/413/6193/w300_brushless-dc-blwr23mda-series-users-guide-1478891101_d-1.png "Page 2
General Description
The BLWR23MDA Series is a compact construction that implements a DC Brushless controller and a DC
Brushless motor in one streamline package. With the two parts combined into one casin\
g, the need to wire
up the motor has been eliminated. The DC Brushless controller operates off 24VDC. The high-speed DC
Brushless motor can operate at 4000RPM, can generate up to 60 oz-in of c\
ontinuous torque, and deliver
as much as 180W, with the BLWR23MDA5 offering. Using hall sensor feedback,...")
![Page 4
Speed Adjust Setting
There are two ways to set the speed on this DC Brushless Motor Controlle\
r combination.
1. One is to use an external voltage or an external potentiometer. If a voltage is used to control the speed
of the motor, the 0.5V to 5V voltage can be tied on VSPD (TB1 - pin 5) with respect to PGND (TB1 - pin 2).
2. If an external potentimeter is used to control the speed of the motor, connect the pot wiper to VSPD
(TB1 - pin 5), the positive end of the potentiometer to +5V out (TB1 - pin...](http://img.usermanuals.tech/thumb/413/6193/w300_brushless-dc-blwr23mda-series-users-guide-1478891101_d-3.png "Page 4
Speed Adjust Setting
There are two ways to set the speed on this DC Brushless Motor Controlle\
r combination.
1. One is to use an external voltage or an external potentiometer. If a voltage is used to control the speed
of the motor, the 0.5V to 5V voltage can be tied on VSPD (TB1 - pin 5) with respect to PGND (TB1 - pin 2).
2. If an external potentimeter is used to control the speed of the motor, connect the pot wiper to VSPD
(TB1 - pin 5), the positive end of the potentiometer to +5V out (TB1 - pin...")