Home > Anaheim > Brushless DC > Anaheim Brushless DC BLWS23MDA Series Brushless Integrated Motor Product Sheet

Anaheim Brushless DC BLWS23MDA Series Brushless Integrated Motor Product Sheet

    Download as PDF Print this page Share this page

    Have a look at the manual Anaheim Brushless DC BLWS23MDA Series Brushless Integrated Motor Product Sheet online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Anaheim manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							FEATURES
    SPECIFICATIONS
    910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990      Fax. (714) 992-0471     www.anaheimautomation.com
    DESCRIPTION
    The BLWS23MDA Series is a compact construction that implements a DC Brushless con -
    troller and a DC Brushless motor in one streamline package.  With the tw\
    o parts combine 
    into one casing, the need to wire the motor has been eliminated.  The DC Brushless control -
    ler operates off 24VDC. The high-speed DC Brushless motor can operate at 4,000 RPM, 
    can generate up to 70 oz-in of continuous torque, and deliver as much as\
     180W, with the 
    BLWS23MDA5 offering.  Using hall sensor feedback, the DC Brushless controller operate\
    s 
    in a constant velocity mode.  The driver is protected against over current (cycle-by-cycle), 
    hall sensor error and under voltage.  An external potentiometer (10K) or external voltage 
    (0.5-5VDC) can be used to control the speed.  For top speed open loop \
    operation, 7VDC 
    must be applied on the Vspeed input.  The direction of the motor can be present by the di -
    rection control input.  A stop function can be done by grounding the Run/Stop input.
    L010526
    BLWS23MDA Integrated BLDC Motor/
    Controller Series BLWS23MDA Integrated BLDC Motor/
    Controller Series
    • Constant Velocity Mode
    • 0.5 to 5V External Voltage Speed Control
    • 2-Quadrant Operation
    • Hall Sensor Feedback
    • Short Circuit Protection
    • Maximum Current Limit Setting at 15.0 Amps
          (20.0 Amps for the BLWS23MDA5 version)
    • Speed Out
    • Direction Input
    • Improved Closed-Loop Control
    Model # Frame 
    Size Rated 
    Voltage (V) Rated 
    Speed (RPM) No Load 
    Speed(RPM) Rated 
    Torque (oz-in) Torque 
    Constant (oz-in/A) Rated 
    Power (W) Weight
    (lbs) L
    Length (inch)
    BLWS23MDA1-24V-4000 NEMA 23244000 5900 55260.82.97
    BLWS23MDA2-24V-4000 NEMA 23244000 5100 155.5 521.33.37
    BLWS23MDA3-24V-4000 NEMA 23244000 5000 316951.94.15
    BLWS23MDA4-24V-4000 NEMA 23244000 5300 455.51352.44.92
    BLWS23MDA5-24V-4000 NEMA 23244000 5600 625.51803.05.77 
    						
    							DIMENSIONS
    910 East Orangefair Ln.  Anaheim, CA 92801     Tel. (714) 992-6990     Fax. (714) 992-0471     www.anaheimautomation.com
    WIRING INFORMATION
    Pin #Description
    1 VIN (18-35 VDC)
    2 PGND
    3 Run/Stop
    4 PG Out
    5 Vspeed
    6 Direction
    7 +5Vout
    *All units are in inches
    Pin # Description
    1 VIN (18-35 VDC)
    2 PGND/Pot (-) Bottom
    3 Run/Stop
    4 PG Out
    5 Pot Wiper
    6 Direction
    7 +5Vout/Pot (+) Top
    TB1: Power In, Control 
    Inputs and Outputs TB1: with 10K External Pot
    SPECIFICATIONS
    Winding Type:
    Delta, 4 Poles Max Radial Force:28N @ 10mm from Flange
    Hall  Effect Angle: 120 Degree Electrical Angle Max Axial  Force:10N - Force
    Shaft Run Out: 0.025mm Insulation Class:Class B
    Radial Play: 0.02mm@450g Dielectric Strength:500VDC for one minute
    End Play: 0.08mm@450g Insulation Resistance:100Mohm, 500VDC
    Humidity Range:  75% (RH) non-condensing Operating Temp. Range:0 - 45 degrees C 
    						
    All Anaheim manuals Comments (0)

    Related Manuals for Anaheim Brushless DC BLWS23MDA Series Brushless Integrated Motor Product Sheet