Anaheim Brushless DC MDC010050101 Users Guide
Have a look at the manual Anaheim Brushless DC MDC010050101 Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Anaheim manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 4
Inputs
Speed Range and Mode selection with and >
The digital inputs [20] and [21] determine both, the operation mode (digital speed
controller or digital sepeed actuator) and the speed range in speed set\
value mode.
DigIN1DigIN2 1 Pole Pair 4 Pole Pair 8 Pole Pair
0 0Open Loop Speed Control, 0-95% PWM Depending on the
Input Voltage
1 0500-5,000 rpm 125-1,250 rpm 62-625 rpm
0 1500-20,000 rpm 125-5,000 rpm 62-2,500 rpm
1 1500-80,000 rpm 125-20,000 rpm 62-10,000 rpm
Please Note
If the signal level...](http://img.usermanuals.tech/thumb/413/6222/w64_brushless-dc-mdc010050101-users-guide-1478892841_d-3.png "Page 4
Inputs
Speed Range and Mode selection with and >
The digital inputs [20] and [21] determine both, the operation mode (digital speed
controller or digital sepeed actuator) and the speed range in speed set\
value mode.
DigIN1DigIN2 1 Pole Pair 4 Pole Pair 8 Pole Pair
0 0Open Loop Speed Control, 0-95% PWM Depending on the
Input Voltage
1 0500-5,000 rpm 125-1,250 rpm 62-625 rpm
0 1500-20,000 rpm 125-5,000 rpm 62-2,500 rpm
1 1500-80,000 rpm 125-20,000 rpm 62-10,000 rpm
Please Note
If the signal level...")
![Page 5
DigIN1DigIN2 1 Pole Pair 4 Pole Pair8 Pole Pair
0 0Open Loop Speed Control, 0-95% PWM Depending on
the Input Voltage
1 0500-5,000 rpm 125-1,250 rpm62-625 rpm
0 1500-20,000 rpm 125-5,000 rpm62-2,500 rpm
1 1500-80,000 rpm 125-20,000 pm
62-10,000 rpm
Note
If the level of the digital inputs DigIN1 [20] and DigIN2 [21] are changed, the new levels are adopted by
a disable-enable procedure.
Set Value Voltage Description
0-0.1V Operation at minimum speed
0.1-5.0V Linear speed adjustment
The actual speed value...](http://img.usermanuals.tech/thumb/413/6222/w64_brushless-dc-mdc010050101-users-guide-1478892841_d-4.png "Page 5
DigIN1DigIN2 1 Pole Pair 4 Pole Pair8 Pole Pair
0 0Open Loop Speed Control, 0-95% PWM Depending on
the Input Voltage
1 0500-5,000 rpm 125-1,250 rpm62-625 rpm
0 1500-20,000 rpm 125-5,000 rpm62-2,500 rpm
1 1500-80,000 rpm 125-20,000 pm
62-10,000 rpm
Note
If the level of the digital inputs DigIN1 [20] and DigIN2 [21] are changed, the new levels are adopted by
a disable-enable procedure.
Set Value Voltage Description
0-0.1V Operation at minimum speed
0.1-5.0V Linear speed adjustment
The actual speed value...")
![Page 7
The input is used for setting the continuous output current limitation in the range
of 0.5-10A.
The current set at the input sill stay available for an indefinite period of time.
Note
The limiting calue should be below the rated motor current (max.continu\
ous current).
Set Value Current Pin Number [25]
Referenced to Ground Pin Number [24]
To parameterize the preferred current
limiting value, an external resistor (at least
62.5 mW) between current limiting input
Pin [25] and ground...](http://img.usermanuals.tech/thumb/413/6222/w64_brushless-dc-mdc010050101-users-guide-1478892841_d-6.png "Page 7
The input is used for setting the continuous output current limitation in the range
of 0.5-10A.
The current set at the input sill stay available for an indefinite period of time.
Note
The limiting calue should be below the rated motor current (max.continu\
ous current).
Set Value Current Pin Number [25]
Referenced to Ground Pin Number [24]
To parameterize the preferred current
limiting value, an external resistor (at least
62.5 mW) between current limiting input
Pin [25] and ground...")
![Page 8
Outputs
+5 VDC Output Voltage
An internal auxiliary voltage of +5VDC is provided for:
- Hall Sensor supply coltage
- For external set value potentiometer (recommended value: 10kohms)
- Gating the signals: and
The output is protected against continuous short circuit.
+5 VDC Output Voltage Pin Number [25]
Referenced to Ground Pin Number [24]
Output Voltage +5VDC 5%
Max. Output Current 35mA
Motor Speed Monitor
The output gives information on the actual speed of the motor shaft. The actual...](http://img.usermanuals.tech/thumb/413/6222/w64_brushless-dc-mdc010050101-users-guide-1478892841_d-7.png "Page 8
Outputs
+5 VDC Output Voltage
An internal auxiliary voltage of +5VDC is provided for:
- Hall Sensor supply coltage
- For external set value potentiometer (recommended value: 10kohms)
- Gating the signals: and
The output is protected against continuous short circuit.
+5 VDC Output Voltage Pin Number [25]
Referenced to Ground Pin Number [24]
Output Voltage +5VDC 5%
Max. Output Current 35mA
Motor Speed Monitor
The output gives information on the actual speed of the motor shaft. The actual...")
![Page 12
ANAHEIM AUTOMATION
COPYRIGHT
Copyright 2006 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated in\
to any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior
written permission of Anaheim Automation, 910 E. Orangefair Lane, Anaheim, CA 92801.
DISCLAIMER
Though every effort has been made to supply complete and...](http://img.usermanuals.tech/thumb/413/6222/w64_brushless-dc-mdc010050101-users-guide-1478892841_d-11.png "Page 12
ANAHEIM AUTOMATION
COPYRIGHT
Copyright 2006 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated in\
to any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior
written permission of Anaheim Automation, 910 E. Orangefair Lane, Anaheim, CA 92801.
DISCLAIMER
Though every effort has been made to supply complete and...")
ANAHEIM AUTOMATION COPYRIGHT Copyright 2006 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated in\ to any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Anaheim Automation, 910 E. Orangefair Lane, Anaheim, CA 92801. DISCLAIMER Though every effort has been made to supply complete and accurate information in this manual, the contents are subject to change without notice or obligation to inform the buyer. In no event will Anaheim Automation be liable for direct, indirect, special, incidental, or conse\ quential damages arising out of the use or inability to use the product or documentation. Anaheim Automation’s general policy does not recommend the use of its’ products in life support applications wherein a failure or malfunction of the product may directly threaten life or injury. Per Anaheim Automation’s Terms and Conditions, the user of Anaheim Automation products in life support applications assumes all risks of such use and indemnifies Anaheim Automation against all damages. LIMITED WARRANTY All Anaheim Automation products are warranted against defects in workmanship, materials and construction, when used under Normal Operating Conditions and when used in accordance with specifications. This warranty shall be in effect for a period of twelve months from the date of purchase or eighteen months from the date of manufacture, whichever comes first. Warranty provisions may be voided if products are subjected to physical modifications, damage, abuse, or misuse. Anaheim Automation will repair or replace at its’ option, any product which has been found to be defective and is within the warranty period, provided that the item is shipped freight prepaid, with previous authorization (RMA#) to Anaheim Automation’s plant in Anaheim, California. TECHNICAL SUPPORT If you should require technical support or if you have problems using any of the equipment covered by this manual, please read the manual completely to see if it will answer the questions you have. If you need assistance beyond what this manual can provide, contact your Local Distributor where you purchased the unit, or contact the factory direct. Torque Speed Curves June 2013L010678