Anaheim Motor parts ACPMxI Gear Motor Series Users Guide
Here you can view all the pages of manual Anaheim Motor parts ACPMxI Gear Motor Series Users Guide. The Anaheim manuals for Motor parts are available online for free. You can easily download all the documents as PDF.
Page 1
December 2012 L010585 ACP-MxI Series AC Induction Gear Motor User’s Guide 910 East Orangefair Lane, Anaheim, CA 92801 e-mail: [email protected](714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com ANAHEIM AUTOMATION
Page 2
December 2012 L010585 General Description The ACP-MxI Series are fractional horsepower induction motors. ACP-MxI series provide users that need a simple solution. The ACP-MxI offers different sizes to accommodate your needs. These AC Induction motors can be customized to have a clutch and/or brake. ACP-MxI series operate at 120 or 220VAC, so there is no need for a transformer, just hook up and go! ACP-MxI series AC Induction motors can also be mated with other accessories, another reason to...
Page 3
December 2012 L010585 Wiring Diagram Part Number uF Voltage ACP-M-2IK6A-CU 0.8 450 ACP-M-31K15A-CU 1 450 ACP-M-4IK25A-CU 1.5 450 ACP-M-5IK40A-CU 2 450 ACP-M-5IK60A-CFU 4 450 ACP-M-5IK90A-CFU 5 450 ACP-M-5IK120A-CF 7 450 ACP-M-5IK150A-CF 8 450 Part Number uF Voltage ACP-M-2IK6A-AU 2.5 250 ACP-M-3IK15A-AU 4 250 ACP-M-4IK25A-AU 6 250 ACP-M-5IK40A-AU 8 250 ACP-M-5IK60A-AFU 16 250 ACP-M-5IK90A-AFU 20 250 ACP-M-5IK120A-AF 25 250 ACP-M-5IK150A-AF 36 250 Power Supply Requirements It is recommended that the...
Page 4
December 2012 L010585 Part Number PolesNo Load Speed (RPM)Rated Load Speed (RPM)Starting Current (A)Rated Current (A)Starting Torque (oz-in)Rated Torque (oz-in)Maximum Torque (oz-in) ACP-M-2IK6N-AU 4 1800 1550 0.41 0.25 5.7 7.2 14.4 ACP-M-3IK15N-AU 4 1800 1600 0.59 0.34 12.5 12.5 25 ACP-M-4IK25N-AU 4 1800 1500 0.91 0.49 19.4 25 50 ACP-M-5IK40N-AU 4 1800 1575 1.5 0.74 33.3 37.5 75 ACP-M-5IK60U-AFU 4 1800 1550 2.2 1.06 62.5 52.7 105.4 ACP-M-5IK90U-AFU 4 1800 1625 3.1 1.7 66 73.6 147.2...
Page 5
December 2012 L010585 Gear Head Part NumberRatioMaximum Torque (oz-in) ACP-G-2N3.6-K 3.6 13.8 ACP-G-2N6-K 6 22 ACP-G-2N9-K 9 34 ACP-G-2N10-K 10 37 ACP-G-2N15-K 15 57 ACP-G-2N18-K 18 69 ACP-G-2N20-K 20 74 ACP-G-2N30-K 30 112 ACP-G-2N36-K 36 134 ACP-G-2N60-K 60 222 ACP-G-2N90-K 90 319 ACP-G-2N120-K 120 347 ACP-G-2N180-K 180 347 ACP-G-2N10X-K 10 347 Gear Head Part NumberRatioMaximum Torque (oz-in) ACP-G-3N3.6-K 3.6 33 ACP-G-3N6-K 6 55 ACP-G-3N9-K 9 83 ACP-G-3N10-K 10 93 ACP-G-3N15-K 15 138...
Page 6
December 2012 L010585 Dimensions Figure 4: Dimensions for ACP-M-2IK6A-(A)(C)UV Figure 5: Dimensions for ACP-M-3IK15A-(A)(C)UV Dimensions for ACP-G-2N Gearmotor
Page 7
December 2012 L010585 Figure 6: Dimensions for ACP-M-4IK25A-(A)(C)UV Dimensions for ACP-G-3N Gearmotor Dimensions for ACP-G-4N Gearmotor
Page 8
December 2012 L010585 Dimensions Figure 7: Dimensions for ACP-M-5IK40A-(A)(C)UV Figure 8: Dimensions for ACP-M-5IK60A-(A)(C)UV Dimensions for ACP-G-5N Gearmotor
Page 9
December 2012 L010585 Figure 9: Dimensions for ACP-M-5IK90A-(A)(C)UV, ACP-M-5IK120A-(A)(C)UV, ACP-M-5IK150A-(A)(C)UV Dimensions Dimensions for ACP-G-5U Gearmotor
Page 10
December 2012 L010585 Gearhead Installation Instructions Assembly 1. Take off the seal cap and clean the grease on the end of the surface. (Figure 13) 2. Take off the O-Ring from the seal cap, and loop it fl atly around the fl ange or mo- tor bracket. (Figure 14) 3. Turn the motor upwards and take off the shaft-sheath as Figure 14. 4. Please refer to fi gure 15. Proper alignment is necessary when assembling gear- head with motor. 5. After assembling, please fasten the 4 exclusive bolts diagonally (Figure...