Analog Devices ICE100B Emulator Users Guide Rev 11

							ICE-100B Emulator User’s Guide 4-1 
4 REFERENCES
This section describes documentation resources helpful in your 
application development.
 For information on designing the interface between an Analog 
Devices processor and the emulation header on your custom 
processor target board, refer to Engineer-to-Engineer Note, Analog 
Devices JTAG Emulation Technical Reference (EE-68), available 
from the Analog Devices Web site. 
 For information on the architecture and system interface of the 
Analog Devices processor, refer to the appropriate Analog Devices 
processor’s hardware reference manual.
 For processor timing specification and other hardware design 
information, refer to the appropriate processor’s data sheet.
 For complete information on software development tools 
(assembler, compiler, linker, and so on), refer to documentation 
included with CrossCore Embedded Studio or VisualDSP++. This 
information is available in the online help and PDF format in the 
Docs folder.
 For information about your development platform, refer to your 
operating system manuals and hardware system manuals. 
						

							4-2 ICE-100B Emulator User’s Guide For information about digital signal processing theory and 
applications, consult:
Digital Signal Processing In VLSI. Prentice-Hall, 
1990.
 Oppenheim and Schafer. Digital Signal Processing. 
Prentice-Hall, 1975. 
						

							ICE-100B Emulator User’s Guide I-1 
IINDEX
C
configurator utility, 1-8
contents, emulator package, 1-2
customer support,   ix
custom processor boards, 2-3
D
data sheets, 4-1
designing custom boards, 2-3
Device Manager window, 1-6
digital signal processing theory, 4-2
documentation resources, 4-1
drivers, 1-6
E
EE-175, 1-1, 1-9
EE-68, 1-8, 2-4, 4-1
emulators, ICE-100B, 1-1
emulator troubleshooting, 1-1, 1-9
F
frequency, 2-3
H
hardware
description, 2-1
references, 4-1
high-speed USB device,   vii
I
ICE-100B emulator, about, 1-1
installation tasks, 1-2
I/O voltage,   vii
J
JTAG
clock frequency, 2-3
frequency, 1-9
header, 2-3
port, 2-3
JTAG frequency, 1-9
L
Linux (ICE-100B) settings, 1-4
M
mechanical specifications, 2-4
multiprocessor support,   vii
P
PC configuration, 1-2
Q
quality assurance, 3-2
R
resetting the target, 2-2 
						

							Index
I-2 ICE-100B Emulator User’s Guide T
target, resetting, 2-2
technical support, 3-1
V
verifying driver installation, 1-6
W
Windows (ICE-100B) settings, 1-4