Analog Devices Probing EI3 Extender Board Manual Rev 10

Probing EI3 Extender Board Manual xi  Preface
 Send questions by mail to:
Processors and DSP Technical Support
Analog Devices, Inc.
Three Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
Supported Products
This extender board supports EZ-KIT Lite/EZ-Board evaluation systems 
with the expansion interface 3.
Product Information
Product information can be obtained from the Analog Devices Web site 
and the CCES online help system.
Analog Devices Web Site
The Analog Devices Web site,...

Product Information
xii Probing EI3 Extender Board Manual
about products you are interested in. You can choose to receive weekly 
e-mail notifications containing updates to the Web pages that meet your 
interests, including documentation errata against all manuals. 
myAnalog provides access to books, application notes, data sheets, code 
examples, and more.
Visit myAnalog (found on the Analog Devices home page) to sign up. If 
you are a registered user, just log on. Your user name is your e-mail...

Probing EI3 Extender Board Manual  xiii 
Preface
Related Documents
For additional information about the 
processor, refer to the following 
publications.
Table 1. Related Processor Publications  
Title Description
Processor Data Sheet   General functional description, pinout, 
 and 
timing of the processor
Processor Hardware Reference Description of the interna
 l processor archi-
tecture and all register functions
Blackfin Processor Programming Reference Description of all allowed
  processor assembly...

Related Documents
  xiv Probing EI3 Extender Board Manual 

Probing EI3 Extender Board Manual 1-1 
1USING PROBING EI3 
EXTENDER BOARD
This chapter provides the setup procedure for the Probing EI3 Extender 
Board and describes two types of interfaces the extender supports.
The information is presented in the following order.
“Package Contents” on page 1-2
“Supported Operating Systems” on page 1-2
“System Requirements” on page 1-3
“Probing EI3 Extender Board Installation” on page 1-3
“Expansion Interface III” on page 1-4
“Board Design Database” on page 1-5 

Package Contents
1-2 Probing EI3 Extender Board Manual
Package Contents
Your Probing EI3 Extender Board package contains the following items.
 Probing EI3 Extender Board
 A bag containing hardware for securing the extender board onto the 
EZ-KIT Lite/EZ-Board
 Release note containing information about the product download 
Contact the vendor where you purchased your extender board or contact 
Analog Devices, Inc. if any item is missing.
Supported Operating Systems
CrossCore Embedded Studio is supported...

Probing EI3 Extender Board Manual 1-3  Using Probing EI3 Extender Board
System Requirements
Verify that your PC has these minimum requirements for the CCES 
installation:
 2 GHz single-core processor
 1 GB RAM
 8 GB available disk space
 One open USB port
A faster disk drive decreases the build time, especially for a large 
amount of source files.
Probing EI3 Extender Board Installation
Follow these instructions to ensure correct operation of the product hard-
ware and software.
1. Attach the extender...

Figure 1-1. Assembled Board Diagram
Part Description
Item
0.75in Nylon Standoff
1 
1.0in Nylon Standoff
2 
1.25in Nylon Standoff
3 
3 
Nylon Screw
4 
Nylon Spacer
5 
EZ-Extender 3
(Stacked)
2 
2 
1 
1 
2 
4 
5 
4 4 
4 
5 
Expansion Interface III
1-4 Probing EI3 Extender Board Manual
Expansion Interface III
The Expansion Interface III (EI3) allows an  extender board to be used 
across various hardware platforms that  have the same expansio
n interface 
connectors.
The connectors contain a majority of...

Probing EI3 Extender Board Manual 1-5  Using Probing EI3 Extender Board
The Probing EI3 Extender Board can interface with EZ-KIT 
Lites/EZ-Boards operating at an IO voltage of 3.3V. Other IO voltages 
are not supported. The extender can be powered from either the EZ-KIT 
Lite/EZ-Board or through the on-board 5V power connector (
P1).
Analog Devices offers many EZ-Extender products that plug on to the 
expansion interface. For more information on these products, visit the 
Analog Devices Web site at:...

Board Design Database
1-6 Probing EI3 Extender Board Manual