Anetsberger Brothers Filtration System FFM80FFM150 Portable filters available in 80 lb or 150 lb shortening capacities User Manual

							 
PARTS LIST 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
L20-344 Rev 2 
ITEM P/N
60161101
P P 10101
P P 10171
2 P 8050‐74
3 P 7037750
4 P 7037096
5 60033902
6 A 6660501
7 P 0062000
8 A 8044801
9 B11852‐00
10 B11853‐00
11 P 7037090
12 P 7037094
13 60094003
14 60015902
C10715‐00
C10715‐01
B6691401
B6691402
B6691403
B6691404
B6691405
B6691406
16 A 7093502
17 60069501
18 P 0011300
19 P 6071062
20 P P 11381
21 P 0092300
22 C7842‐00
23 C7841‐00
24 60160501
25 A 6653522
D6170‐00
D6170‐01
27 C10533‐00
28 P 9800‐94
29 P 9314‐90
30 60015903
31 60033903
C10718‐00
C10718‐01
33 60015902
C10713‐00
C10713‐01
C10704‐00
C10704‐01
36 C10702‐00
37 P P 10752
C10705‐00
C10705‐01
39 C10709‐00
40 B14185‐00
41 D6168‐00
42 B14183‐00
C10703‐00
C10703‐01
A 7044101
A 7044102
45 P 8025‐97
46 P P 10192
60046201
P P 10470
48 B6788202
49 B6788201
50 60124201
51 B6793101
52 B6793102
53 700387 SCHEM, P ORTA BLE FLTR FFM CKT BKR,RKR DPST 250V 4A (INTL/CE)
CORD,INTERNAL DOMESTIC
CORD,EXTERNAL DOMESTIC
CORD,EXTERNAL EXTENSION DOMESTIC ONLY
CORD,INTERNAL INTL/CE 
CORD,EXTERNAL INTL ONLY SW,RKR SPST (1‐0) 125V RED (DOMESTIC) FLTR,FR TOP CVR FFM150
FLTR,PMP PG SPRT FFM
FLTR,PMP BOX PL FFM
FLTR,PMP PG CVR FFM
FLTR,PMP BOX HDL FFM
FLTR,CORD BRKT FFM80
FLTR,CORD BRKT FFM150
FLTR,HDL PORTABLE 
FFM80
FLTR,HDL PORTABLE FFM150
SCR,SHLDR 5/ 16 DIA X 3/ 8
BUSHING,STRAIN RELIEF‐RIGH
T
FLTR,FR TOP CVR FFM80 CONN,NIPPLE 3/ 8 MA LE NPT
CONN,COUPLER 3/ 8 NON VLVED
FLTR,WLDT PICK‐UP TU FFM80
FLTR,WLDT PICK‐UP TU FFM150
CONN,NIPPLE 1/ 2 FEMALE NPT
FLTR,WLDMT TK CVR FFM80
FLTR,WLDMT TK CVR FFM150
FLTR,FR BK PNL FFM80
FLTR,FR BK PNL FFM150
FLTR,PMP ELEC BOX FFM
SCR,10‐32 X 1/ 2 PNH PHH ZN TF SCR,10‐24 X
 3/ 8 FH PHILLIPS
CPLG,KNURLED CAP FLTR P/U CSTR,PMF 2 W/TP PL
CSTR,PMF 2 LOCKING W/TP PL
NUT,HEX (KEP) 10‐24 ZN
FLTR,NOZZLE FFM80/150
FLTR,WLDMT FFM80/150
GRIP , HDL PORTABLE FLTR
FLTR,HOSE 65. 00 FFM80/ 150
FLTR,TK WLDMT FFM80
FLTR,TK WLDMT FFM150
FLTR,CLP PPR FFM/FM*
FLTR,PICK‐UP SCRN 15. 50 FFM* FLTR,WLDMT FR FFM80 230/ 240V S95 (POST MA RCH 2012) 
FLTR,WLDMT FR FFM150 230/ 240V
 (POST MA RCH 2012)
FLTR,WLDMT FR FFM80 115V (POST MA RCH 2012)
FLTR,WLDMT FR FFM150 115V (POST MA RCH 2012)
FLTR,BOT COV FFM80 INTL/CE CONN,NIPPLE 1/ 2 FEMALE NPT
FLTR,WLDMT FR FFM80 115V S283
FLTR,WLDMT FR FFM150 115V S283
FLTR,WLDMT FR FFM150 230V S283
FLTR,WLDMT FR FFM150 230V S283
35
38
43
47 34
44DESCRIPTION
PMP,ASSY 5GP M 1/ 3HP 115/ 230V S283 (DIM 
A = 2. 25)
PUMP/MTR‐1/ 3HP 115/ 230V 50HZ S95 (DIM A = 3. 91)
PUMP/MTR‐1/ 3HP 240V 50HZ S95 (DIM A = 3. 91)
N UT, 5/ 16‐18 FLNG LC
ELB,BLK STR 90 1/ 2 1
15
26
32NIP,BLK 1/ 2 X 3‐1/ 2
CONN,COUPLER 1/ 2 NON VLVED
FLTR,HDL 2. 50 DIA BLUE
SCR,10‐24 X 1/ 2 SE
T
TEE,BLK 1/ 2 X 1/ 2 X 1/ 4 NPT PG,ASSY VENT TU FFM
FTG,COMP MA LE CONNECTOR
FTG,VENT TIP FFM80/ 150
NIP,BLK 1/ 2 CL
NIP,BLK 1/ 2 X 2‐1/ 2
SCR,10‐24 X 3/ 8 INDT HEX
11 
						

							ORIGINAL EQUIPMENT LIMITED WARRANTY General Warranty Anets, Inc. warrants to the original user of its commercial cooking appliances and related equipment that said appliances and related equipment will be free from defects
in material and workmanship under normal use for a period of one (1) year from the date of installation, with appropriate documentation, to a maximum of fifteen (15)
months from the date of manufacture, subject to the following additions, exceptions, exclusions and limitations. What is covered This warranty is limited to the repair or replacement at the Company’s option, without charge, of any part found to be defective within the warranty period and reasonable
expenses incurred for freight and material for the installation of such part; in addition, the Company’s obligation shall be limited to reimbursement for normal labor on such
parts. 
Anets, Inc. agrees to pay the Authorized Service and Parts Distributor, for any labor and material required to repair or replace, at the Company’s option, any part which 
may fail due to defects in material or workmanship during the above general warranty period. Silver Line Fryers In addition to the above general warranty, for its economy fryers and cookers, the Company warrants to the original user any mild. 
 Stainless steel fry tank or cooking
vessel to be free from defects for a period of one (1) year, prorated from the date of manufacture.  Labor and freight shall be the responsibility of the end user. Gold Line Fryers In addition to the above general warranty, for its standard fryers and cookers, the Company warrants to the original user any stainless steel fry tank or cooking vessel to be free from defects for a period of ten (10) years from the date of manufacture.  Labor and freight shall be the responsibility of the end user. Pasta Cooker In addition to the above general warranty, for its standard fryers and cookers, the Company warrants to the original user any stainless steel fry tank or cooking vessel to be free from defects for a period of one (1) year from the date of manufacture.  Labor and freight shall be the responsibility of the end user. Limitations to Fry Tank and Cooking Vessel Warranty After the expiration of the general warranty period, any additional warranty on fry tanks or cooking vessels shall only obligate the Company to repair or replace, at its
option, any fry tank or cooking vessel which it determines to be defective.  Claims under this item shall be supported by a statement detailing the defect, and the
Company 
may require the return of the fry tank or cooking vessel claimed to be defective.  Labor and freight shall be the responsibility of the end user. How to Keep Your Warranty in Force •  Make sure any shipping  damages are reported immediately. Damages of this nature are the responsibility of the carrier and must be reported by the receiver. 
•  Install the unit properly. This is the responsibility of the installer and the procedures are outlined in the manual. • Do not install it in a home or residence. •  Maintain it properly. This is the responsibility of the user of the appliance and the procedures are outlined in the manual. •  Adjustments, such as calibration, leveling, tightening of fasteners or plumbing or electrical connections normally associated with initial installation. These 
procedures are outlined in the manual and are NOT covered by warranty. 
• 
If it is damaged due to flood, fire or other acts of God, this is not covered under this warranty. 
•Use it for what it is intended. If it is used for a purpose other than for which it was intended or designed, resulting damages are not covered under the    
  warranty. 
•  Make sure that it has the correct voltage, gas supply and/or good quality water
. If a failure is due to poor water quality, harsh chemical action, erratic voltage 
or gas supplies, these damages are not covered under the warranty. 
•  Do not materially alter or modify from the condition in which it left the factory. 
• 
Do not obliterate, remove or alter the serial number rating plate. •  Use only Genuine OEM parts from Anets, Inc. or its Authorized Parts and Service Distributors. Repairs are not covered by the warranty. 
• If any other failure occurs which is not attributable to a defect in materials or workmanship, it is not covered. This warranty specifically excludes parts which wear or would be replaced under normal usage, including, but not limited to, electric lamps, fuses, interior or exterior finishes, o-rings and gaskets. Limits to the Warranty Outside the United States of America and Canada, this warranty is limited to the replacement of parts and Anets, Inc. will not bear any other expense be it   labor, mileage, freight or travel. If any oral statements have been made regarding the appliance, these statements do not constitute warranties and are not part of the contract of sale. This limited warranty constitutes the complete, final and exclusive statement with regard to warranties. THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN, ORAL OR IMPLIED, INCLUDING, BUT  NOT 
LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY AGAINST LATENT DEFECTS. 
Limitations of Liability In the event of a warranty or other claim, the sole obligation of Anets, Inc. will be the repair or replacement, at the Company’s option, of the appliance or the componentpart. This repair or replacement will be at the expense of Anets, Inc. except as limited by this warranty statement. Any repair or replacement under this warranty does notconstitute an extension in time to the original warranty. Parts covered under this warranty will be repaired or replaced, at the Company’s option, with new or functionally operative
parts. The liability of Anets, Inc. on any claim of any kind, including claims based on warranty, express or implied contract, negligence, strict liability or any other legal theories
will be exclusively the repair or replacement of the appliance
. This liability will not include, and the purchaser specifically renounces any right to recover special, incidental,
consequential or other damages of any kind, including, but not limited to, injuries to persons, damage to property, loss of profits or anticipated loss of the use of this appliance. 
If any provision of this warranty is unenforceable under the law of any jurisdiction, that provision only will be inapplicable there, and the remainder of the warranty will 
remain unaffected
. The maximum exclusion or limitation allowed by law will be substituted for the unenforceable provision. 
How to Obtain Warranty Service First direct your claim to the Anets, Inc. Authorized Service and Parts Distributor closest to you giving complete model, serial and code numbers, voltage, gas type,and description of the problem. Proof of the date of installation and/or the sales slip may also be required. If this procedure fails to be satisfactory, write the National
Service Manager, Anets, Inc., P. O. Box 501, Concord, NH. 03302-0501. USA 
 This warranty gives you certain specific legal rights; you may have other rights which vary from state to state. 
                           Anets, Inc., P.O. Box 501, Jct. I‐89 & I‐93 Concord, NH  03302‐0501  
                      509 Route 3A, Bow, NH  03304  USA 
                           Tel: (603)225‐6684  Fax: (603)228‐5231   www.ANETS.com 
                      L14­022 R0         Printed in U.S.A.  
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
L20-344 Rev 2 12  
						

							Left Blank Intentional 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
13 
L20-344 Rev 2  
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Anets ~ Dependable Foodservice Equipment  
         PO Box 501, Concord, NH  03302  
1-603-225-6684~Fax 603-228-5231 
www.anets.com 
Keep this Manual in a Convenient Location for Reference 
 
 
 
 
 
 
L20-344 Rev 2