Anetsberger Brothers Griddle SGC Models 34 Chrome gas griddle User Manual

ANETS INC.  PO Box 501 Concord, NH 03302-0501
Tel: 603-225-6684, Fax: 603-225-8497 
Models
MG - Manual Grills 
SG - Standard Grills 
SGC - Chrome Grills 
Installation,
User Operation, 
&
Maintenance
Manual 
DANGER 
Improper installation, adjustment, alteration, service, or maintenance can 
cause property damage, injury or death.  Read the installation, operating 
and maintenance instructions thoroughly before installing or servicing this 
equipment. 
WARNING 
After installation of this equipment,...

2
CONTENTS
Shipping Container Inspection.......................................................  3
Grill Gas Supply Specifications......................................................  4
Code Requirements......................................................................  5
Installation Requirements...............................................................  6
Gas Connection Instructions..........................................................  6
Grill Operating...

3
DANGER
Read these specifications, Code Requirements, Installation Requirements, Instal-
lation Instructions, and Operating Instructions 
very carefully.  Failure to follow the
Instructions could cause the grill to malfunction.  A grill malfunction can result in
property damage, serious bodily injury, or death.
!
1. Carefully examine the shipping container for external damage.  When damage is noted, notify the
delivery carrier immediately.  Save all packing materials for damage claim examination.
2. If...

4
GRILL GAS SUPPLY SPECIFICATIONS
Pleasemake sure that your desired grill location has gas
supply factors that are suitable for this product:
SUPPLY PRESSURE***
Natural Gas Propane Gas
3½“  W.C. 
**10“  W.C.
6“  W.C., minimum 11“  W.C., minimumMANIFOLD PRESSURE*
Refer to the specification plate on the grill to identify the BTUH input for your specific model.
IMPORTANT NOTE:   BTU/Hr Ratings are  based on 
sea level operation. For sites above
2000 feet, reduce this rating 4% for  each 1000 feet above sea...

5
CODE REQUIREMENTS CODE REQUIREMENTSCODE REQUIREMENTS CODE REQUIREMENTS
CODE REQUIREMENTS
IMPORTANT: Read the Code Requirements and the Installation Requirements and Instructions
carefully, 
before starting the installation.  Contact ANETS (800/ 837-2638) if any problems or
questions arise.
The grill installation must conform with  local  codes, or in the absence of local codes, with the National
Fuel Gas Code, ANSI Z223.1 (latest edition); the Natural Gas Installation Code, CAN/CGA-B149.1
(latest...

6
INST INSTINST INST
INST
ALLA ALLAALLA ALLA
ALLA
TION REQ TION REQTION REQ TION REQ
TION REQ
UIREMENTS UIREMENTSUIREMENTS UIREMENTS
UIREMENTS
!
GAS CONNECTION INSTRUCTIONS GAS CONNECTION INSTRUCTIONSGAS CONNECTION INSTRUCTIONS GAS CONNECTION INSTRUCTIONS
GAS CONNECTION INSTRUCTIONS
Install the grill in accordance with the preceding Code Requirements, as well as the following Installation
Requirements.
1. DO NOT install this grill in a mobile home, trailer, or recreational vehicle.
2. Install this grill...

7
DANGER
NEVERoperate this grill when its flue is
blocked or when the ventilation hood is not
on because the combustion products can
accumulate and cause serious injury or
death.
A.  Schedule regular cleanings of the grill to ensure long-term satisfactory operation.  Refer to the Daily
    Cleaning Procedure, later in this manual.
B. Before servicing and maintenance, allow the grill to cool.  ALWAYS shut off  gas to the grill while
working on it, to prevent personal injury.
C. Contact the factory...

8
Conditioning Instructions - SGC Models ONLY
GRILL PREP GRILL PREPGRILL PREP GRILL PREP
GRILL PREP
ARA ARAARA ARA
ARA
TION FOR USE TION FOR USETION FOR USE TION FOR USE
TION FOR USE
Conditioning Instructions - MG & SG Models ONLY
MANUAL AND STANDARD GRILLS ONLY    (DO NOT USE FOR CHROME GRILL)
CHROME GRILL
1. Spread a coating of cooking oil evenly over the surface of the grill.  Set the thermostats to 350°F and
allow to heat for 1 hour.
2.   Using the scraper provided,  remove any carbonized material...

9
Chrome Grill Cleaning Instructions (SGC Models)
IMPORTANT: Do not use any abrasive or caustic cleaners or pads on chrome
grills.
SIMPLE 3 STEP PROCESS….. Scrape, Scrub, Shine
1. Scrape – with the razor scraper provided.  Make sure razor edge is exposed.  (The blade is turned
inward during shipping for safety protection.)
2. Scrub  -  with the palmyra cleaning brush provided and cool water.
3. Shine  -  (only if necessary) with Bon Ami™ cleanser, water, and a soft cloth.      Note:  It may be
necessary...

10
GRILL  GRILL GRILL  GRILL 
GRILL
TR TRTR TR
TR
OUBLESHOO OUBLESHOOOUBLESHOO OUBLESHOO
OUBLESHOO
TING GUIDE TING GUIDETING GUIDE TING GUIDE
TING GUIDE
Pilot flame does not
stay lit.
PROBLEMTESTREMEDY
Pilot (piezo-electric)
pushbutton igniter does
not light the pilot flame.1. Check if igniter is generating a spark.
2. Check for loose spark wire or igniter nut.
3. Check position of electrode 3/16” from
pilot burner tip.
4.  Check for dirty/sooty electrode.
5.  Retry igniter.1. Yes - Skip to test #3.
No -...