Anschutz 1907, 1912, 1913 Instruction Manual

27
To move trigger cam No. 11:
¥lowest position of the trigger cam:
lowest trigger weight
¥highest position of the trigger cam:
highest trigger weight
If the trigger weight is to be more than 200 g,the trigger cam No. 11 must be adjusted
to the highest position (turn it by 180° and
fix it then). To do this you need a 2 mm hex
key and perhaps tweezers.
¥if you turn it to the left:
You release the screw
¥if you turn it to the right:
You tighten the screw
      Attention:
Please ensure the trigger cam is...

28
i retuo
pa sd f
The sear engagement is too long:
There is a small distance between the
second stage and the release of the trigger.
¥Turn set screw No. 5 clockwise after
cocking and releasing (approximately
1/8 turn each).
¥Repeat this process until you do not feel
the second stage anymore. Then turn
1/5 turn back to the left. Thus the optimum
sear engagement is adjusted.
The sear engagement is too short:
There is no second stage. The trigger
releases undefined without second stage.
¥Turn set screw...

29
      Attention:
The trigger stop set screw No. 8 can be
turned over the second stage or first stage
function. Malfunction (the trigger does not
release)!
6. Adjustment of the trigger blade
¥Loosen hex screw No. 7
¥Trigger blade No. 6 can be moved in the
longitudinal guide and can be tilted
laterally.
7. Change of two-stage trigger into
single stage trigger
Adjusting process:
¥Turn first stage weight screw No. 4 clock-
wise until you have reached the maximum
first stage.
¥Cock the rifle.
¥Turn set...

30
Important note:
To protect your highly accurate trigger and
to maintain perfect functioning always
close the bolt carefully.
      Attention:
If you change the trigger remove the bolt
from the receiver when fitting the trigger
as otherwise the trigger will be damaged.
i retuo
pa sd f
to the left until the cocking piston or firing
pin will release again.
The trigger does not catch the cocking
piston or firing pin:
¥Set screw No. 4 (first stage) is screwed in
too much.
¥Check to see if the spring is...

1607, 1613, 1608 EDS1407, 1407 Z, 1409, 1411
1413, 1408 EDS1959 - 1974
1807, 1907, 1807 Z, 1907 Z
1907 Silh., 1807 Rep.
1907 Rep., 1907 Rep., 1912
1813, 1913, 1808 EDS
1808 D-RT, 1827, 1827F, 2007
2007/660, 2012, 2013
2013/690, 2013 Benchrest
54.18 MSR, 1808 MSR
2002 Compressed Air,
2020, 2025
1903, 1416 MSP, 1403 Rep.
64 MSR, 64 MPR, 64 R
2001 Superair
2001 D-RT Superair
2002 Superair
2002 D-RT Superair 700.65401407-U9l  150 gl
700.65411408-U1l  500 gl
700.65421408 D-U1l500 gl
700.65505071/1l  100 gl...

32
Cleaning, maintenance, care,
lubrication
Even after considerable use, your
ANSCH†TZ small bore match rifle will not
require much attention - a tribute to its so-
lid design, first class materials, well proven
ANSCH†TZ workmanship and precision.
If you follow the recommendations below,
you will help maintain the excellent
performance of your rifle for a long time.
Regular care after every shooting:
¥Please only use resin and acid free oils.
¥Remove any residues from the barrel.
Clean with a lint-free...

33
Accessories
Please ask for our catalogue. fore recommend either to use our cleaning
rod guide or to clean your gun in a way
that it is horizontal or even with the stock
up to avoid any contamination of the
trigger mechanism.
Protect your rifle against dust, sand,
humidity, heat and other harmful influences.
Vacuum clean your gun case or soft gun
case once a month to remove dust and lint.
Gun cases and soft gun cases should have
a smooth and dust rejecting inner lining.
Be aware that condensed water...

Stand  01/03
Original-ErsatzteillisteÊ List of component parts
1907/1913 im Schaft 1907 1907/1913 in Stock 1907
1907L/1913L im Schaft 1907L 1907L/1913L in Stock 1907L 

Stand  01/03
Nr. Bestell-Nr. Benennung Description Kennnummer Preisgruppe
No. Order-No. Code number Price group
1 003319 0 Schlo§ Bolt assembly 1807-U5 Z4
* 003312 0 Schlo§, links Bolt assembly, left 1807L-U5 Z4
2 002890 0 Auszieher Extractor 1404-17 M1
* 003306 0 Auszieher, links Exrractor, left 1807L-55 M1
3 002894 0 Patronenhalter Cartridge retainer 1404-20 P1
* 003307 0 Patronenhalter, links Cartridge retainer, left 1807L-56 P1
4 002893 0 0 Federbolzen (2) Spring bolt (2) 1404-18 C1
5 003296 0 0...

Stand  01/03
* 001207 0 Direkt-Abzug #700.6620 Single-stage trigger #700.6620 5018D¥
* 001206 0 Druckpunkt-Abzug #700.6610 Two-stage trigger #700.6610 5018L¥
* 001208 0 Direkt-Abzug #700.6630 Single-stage trigger #700.6630 5018LD¥
44 003930 0 0 Zylinderschraube Pan head screw 5071-46/1 B1
45 003929 0 0 Zylinderschraube Pan head screw 5071-45/1 B1
50 006431 0 Schaft Stock 1907-8010-00-00 C5
* 005912 0 Schaft, links Stock, left 1807L8010-01-20-1 D5
51 003300 0 0 Widerlager Abutment 1807-55 D1
52 005106 0 0...