Anthem Ltx-500 Lcos Projector Instructions

Perfect for Any Location
● Comes with an 80% vertical and 34% horizontal lens 
    shift function. (
P23)
Beautiful Images on the Big Screen   
● Enjoy smooth and high resolution video images with 
      no visible grid, brought about by full high defi nition 
     resolution of 1920 x 1080 pixels. (
P26)  

Getting started
12
  Contents 
Getting started
Safety Precautions.............................................2
THX Certifi cation.................................................9
Main Features...................................................10
Contents...........................................................12
How to Read this Manual/Accessories/       
Optional Accessories.......................................13
About this Manual................................................13
Check the...

 
 
ENGLISH
 
 
13
Getting StartedPreparationBasic OperationTroubleshooting
Settings
Others
  How to Read this Manual/
Accessories/Optional Accessories


































This manual mainly describes the operating method using the remote control.






























● Buttons on the remote control are described as [Button Name].






























● Items on the menu are described as lSelection Itemz.




































■ Conventions in this manual...

Getting started
14
■ Front Side/Left Side
■ Rear Side/Top Side/Right Side
 
Controls and features
To connect the power cord (P26)Remote Sensor (
P17)
Lamp Cover (
P48)
Exhaust VentRemote Sensor
(P17)Air Inlet       Lens Cover (opened)
        (
P26)Lens Cover
 (closed)











CAUTION
● Do not place your fingers in the gap at the lens 
during lens shift adjustment. This may cause injuries 
if your fi ngers are caught in between the gap.
 
    (
P23)
● Do not let your fi ngers or other objects get...

 
 
ENGLISH
 
 
15
Getting StartedPreparationBasic OperationTroubleshooting
Settings
Others











CAUTION
● Do not close lens cover when projecting. Otherwise 
it will cause malfunction


heat and fi re.
■ Bottom Surface
Feet: The height (0 to 5 mm) can be adjusted by turning the foot.
Air inlets
Air inlets/Filter (
P52)Light on (Red): Warning mode
  (
P47)
Light on/Blinking (Orange):
      Lamp warning
  (
P47)  Light on (Red): 
       Standby mode
Light on (Green): 
       During projection...

Getting started
16
Controls and features (continued)
■ Remote Control
To turn on the power To turn off the power
To set the screen size (
P28) To control lens (
P26)
To set gamma (
P42)
To adjust color density (
P42)
To adjust brightness (
P42)To adjust sharpness (P42)
To adjust contrast (
P42)
To display test pattern
To display/close the menu 
(P30)To return to the previous menu
To select input mode (P26)
To adjust color temperature (
P42)
To hide the image temporarily (
P27)
To switch picture mode (...

 
 
ENGLISH
 
 
17
Getting StartedPreparationBasic OperationTroubleshooting
Settings
Others
  How to Use the Remote control 



































● If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. 
     When this happens, replace the batteries. Insert the batteries according to the       marks.
● Be sure to insert the

end fi rst.
● If an error occurs when using the remote control, remove the batteries and wait for 5...

Preparation
18
  Selecting Connecting Devices
● Do not turn on the power until connection is complete.

● The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be  
      connected.
● For audio output, connect the device to an amplifi er.
● The images may not be displayed depending on the devices and cables to be connected.
     Use an HDMI compliant cable (sold separately) with the HDMI logo. 
● It may not be possible to connect to...

 
 
ENGLISH
19
Getting StartedPreparationBasic OperationTroubleshooting
Settings
Others
  Connecting




































Connecting via Component Video Cable




● Set lCOMP.z in the setting menu to lY Pb/Cb Pr/Crz. (P35 - 12 )
Connecting via Video Cable and S-Video Cable
SYNCSYNC
This unit
To component video input terminals
Component video cable
 (sold separately)DVD player
C
R/PR (red)
C
B/PB (blue)
Y (green) Component video output 
 terminals
SYNCSYNC
This unit
To video input terminal...

Preparation
20



 
Connecting via HDMI Cable




































 
Connecting via HDMI-DVI Conversion Cable
● If noise is produced, take PCs (including notepads) away from this unit.
This unit
HDMI cable (sold separately) To HDMI  1 or HDMI  2 input terminal
HDMI output terminalDVD recorder
This unit
To HDMI  1 or HDMI  2 input terminal
HDMI-DVI conversion cable
(sold separately)Notebook PC
DVI output terminal
Connecting(Continued)