AOC 2036sa User Manual

							 31 
Picture Boost 
 
						

							 32 
  Item Icon Function Adjust 
Range Description 
 
 
Picture 
Boost 
 Horizontal Position 00-100 Adjust Frame horizontal 
Position 
 Vertical Position 00-100 Adjust Frame vertical 
Position 
 Contrast 00-100 Adjust Frame Contrast 
 Brightness 00-100 Adjust Frame Brightness 
 Frame Size 14-100 Adjust Frame Size 
 Bright Frame on or off Disable or Enable Bright 
Frame 
 Exit   Exit to main menu 
 
Notes :  
 
One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.
 
						

							 33 
Extra Setting 
 
 
						

							 34 
 Item Icon Function Adjust Range Description 
 
 
Extra 
Setting 
 Language   Select the OSD language 
 Reset  yes or no Reset the menu to default  
 DDC-CI yes or no Turn ON/OFF DDC-CI Support 
 Timeout 05-120 Adjust the OSD Timeout 
 Transparence 00-100 Adjust the transparence of OSD 
 H. Position 00-100 Adjust the vertical position of OSD 
 V. Position 00-100 Adjust the horizontal position of 
OSD 
 
 
Off Timer 00-24 Adjust the DC off time 
 Exit   Exit to main menu 
 
						

							 35 
Exit 
 
 
						

							 36 
LED Indicator 
 
Status 
 
LED Color 
 
 
 
 
 
 
Full Power Mode 
 
 
 
 
 
Blue 
 
 
 
 
 
 
Active-off Mode 
 
 
 
 
 
Orange 
 
 
						

							 37 
Driver 
Monitor Driver 
 
Windows 2000 
 
1. Start Windows® 2000  
2. Click on the Start button, point to Settings, and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advanced....  
5. Select Monitor  
- If the Properties button is inactive, it means your monitor is properly configured. Please stop installation.  
- If the Properties button is active. Click on Properties button. Please follow the steps given below.  
6. Click on Driver and then click on Update Driver... then click on the Next button.  
7. Select Display a list of the known drivers for this device so that I can choose a specific driver, then click on Next 
and then click on Have disk....  
8. Click on the Browse... button then select the appropriate drive F: ( CD-ROM Drive).  
9. Click on the Open button, then click on the OK button.  
10. Select your monitor model and click on the Next button.  
11. Click on the Finish button then the Close button.  
If you can see the Digital Signature Not Found window, click on the Yes button.  
 
 
Windows ME 
1. Start Windows® Me  
2. Click on the Start button, point to Settings, and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advanced....  
5. Select the Monitor button, then click on Change... button.  
6. Select Specify the location of the driver(Advanced) and click on the Next button.  
7. Select Display a list of all the drivers in a specific location, so you can choose the driver you want, then click on 
Next and then click on Have Disk....  
8. Click on the Browse... button, select the appropriate drive F: ( CD-ROM Drive) then click on the OK button.  
9. Click on the OK button, select your monitor model and click on the Next button.  
10. Click on Finish button then the Close button.  
 
 
 
 
						

							 38 
Windows XP 
 
1. Start Windows® XP  
2. Click on the Start button and then click on Control Panel.  
 
 
3. Select and click on the category „Appearance and Themes‟ 
 
 
4. Click on the Display Item.  
 
    
 
						

							 39 
5. Select the Settings tab then click on the Advanced button.  
 
 
6. Select Monitor tab 
- If the Properties button is inactive, it means your monitor is properly configured. Please stop installation. 
- If the Properties button is active, click on Properties button. 
Please follow the steps below.  
 
 
7. Click on the Driver tab and then click on Update Driver... button.  
 
   
 
						

							 40 
8. Select the Install from a list or specific location [advanced] radio button and then click on the Next button.  
 
 
9. Select the Dont Search. I will choose the driver to install radio button. Then click on the Next button.  
 
 
10. Click on the Have disk... button, then click on the Browse... button and then select the appropriate drive F: 
(CD-ROM Drive).  
 
11. Click on the Open button, then click the OK button.  
12. Select your monitor model and click on the Next button. 
- If you can see the has not passed Windows® Logo testing to verify its compatibility with Windows® XP message, 
please click on the Continue Anyway button.  
13. Click on the Finish button then the Close button.  
14. Click on the OK button and then the OK button again to close the Display Properties dialog box.