AOC 2216va User Manual

							Please follow the steps below.    
7. Click on the Driver tab and then click on Update Driver... button.   
8. Select the Install from a list or specific loca tion [advanced] radio button and then click on the  Next button.   
9. Select the Dont Search. I will choose the driv er to install radio button. Then click on the Next button.   
10. Click on the Have disk... button, then click  on the Browse... button and then select the appro priate drive F: (CD-ROM Drive).   
11. Click on the Open button, then click the OK  button.   
12. Select your monitor model and click on the Nex t button. 
- If you can see the has not passed Windows® Logo  testing to verify its compatibility with Windows® XP message, please click on 
the Continue Anyway button.   
13. Click on the Finish button then the Close b utton.   
14. Click on the OK button and then the OK butt on again to close the Display_Properties dialog box .   
Windows Vista  
1. Start Windows® Vista 
2. Click the Start button; select and click on Con trol Panel. 
3. Select and click on Hardware and Sound 
4. Choose Device Manager and Click on Update dev ice drivers. 
5. Select Monitor and then right click on Generi c PnP Monitor. 
6. Click on Update Driver Software. 
7. Select Browse my computer for driver software.  
8. Click the Browsebutton and choose the drive in  which youve placed the disk. Example:(CD-ROM Driv e:\\Lcd\PC\drivers\). 
9. Click the Next button. 
10. Wait few minutes for installing the driver, and  then click Close button.  
6. Technical Support         Frequently Asked Questions  
Problem & Question   Possible Solutions Power LED Is Not ON  
· 
Make sure the power button is ON and the Power Cord  is properly connected to a grounded 
power outlet and to the monitor.
 
No Plug & Play  
· 
In order for the Plug & Play feature of the monitor  to work, you need a Plug & Play compatible 
 
						

							computer & video card.   Check with your computer manufacturer. Also check the monitors video 
cable and make sure none of the pins are bent. 
·  
Make sure the AOC Monitor Drivers are installed (AO C Monitor Drivers are available at : http://www.aoc.com
) 
Picture Is Fuzzy & Has Ghosting  
Shadowing Problem  
· 
Adjust the Contrast and Brightness Controls. 
· 
Make sure you are not using an extension cable or s witch box. We recommend plugging the 
monitor directly to the video card output connector  on the back of your computer.
 
Picture Bounces, Flickers Or Wave  
Pattern Is Present In The Picture 
· 
Move electrical devices that may cause electrical i nterference as far away from the monitor as 
possible. 
·  
Use the maximum refresh rate your monitor is capabl e of at the resolution your are using.
 
Monitor Is Stuck In Active  
Off-Mode 
· 
The Computer Power Switch should be in the ON posit ion. 
· 
The Computer Video Card should be snugly seated in  its slot. 
· 
Make sure the monitors video cable is properly con nected to the computer. 
· 
Inspect the monitors video cable and make sure non e of the pins are bent. 
· 
Make sure your computer is operational by hitting t he CAPS LOCK key on the keyboard while 
observing the CAPS LOCK LED. The LED should either  turn ON or OFF after hitting the CAPS 
LOCK key.
 
Missing one of the primary colors  
(RED, GREEN, or BLUE)  
· 
Inspect the monitors video cable and make sure tha t none of the pins arebent. 
· 
Make sure the monitors video cable is properly con nected to the computer.
 
Screen image is not centered or  
sized properly 
· 
Adjust H-Position and V-Position or press hot-key ( AUTO).
 
Picture has color defects (white  
does not look white) 
· 
Adjust RGB color or select color temperature
 
Horizontal or vertical disturbances  
on the screen  
· 
Use win 95/98 shut-down mode Adjust CLOCK and FOCUS  or perform hot-key (AUTO-key )
 
 
 
						

							7. Product Information 
   Specifications  
LCD Panel    Model number    2216Va 
Driving system    TFT Color LCD   Viewable Image Size  558mm diagoanl Pixel pitch    0.282mm(H) x 0.282mm(V) Video    R, G, B Analog lnterface & Digital Interface  Separate Sync.    H/V TTL Display Color    16.7M Colors   Dot Clock    165 MHz   
Resolution    Horizontal scan range    30 kHz - 83 kHz 
Horizontal scan  
Size(Maximum)   473.8mm   Vertical scan range    56 Hz - 75 Hz   Vertical scan  
Size(Maximum)   296.1mm   Optimal preset resolution    1680 x 1050 (60 Hz) Highest preset resolution    1680 x 1050 (60 Hz)   Plug & Play    VESA DDC2B/CI   Input Connector    D-Sub 15pin & DVI-D   Input Video Signal    Analog: 0.7Vp-p(standard), 75 O
HM, Positive & DVI-D Digital Interface (TMDS) 
 
Power Source    100~240VAC, 47~63Hz   Power Consumption    Active < 45W   
Standby < 1W   
Speakers  2w x 2 
Physical 
Characteristics    Connector Type    15-pin Mini D-Sub & DVI-D   
Signal Cable Type    Detachable   Dimensions & Weight:        Height (with base)    505.8 mm Width    402 mm 
 
						

							Depth    210.8 mm Weight (monitor only)    5.3 kg Weight (with packaging)    6.7 kg 
Environmental    Temperature:        
Operating    0° to 50°   Non-Operating    -20°to 60° Humidity:        Operating    10% to 85% (non-condensing)   Non-Operating    5% to 80% (non-condensing)   Altitude:        Operating    0~ 3000m (0~ 10000 ft )   Non-Operating    0~ 5000m (0~ 15000 ft )   
  
EPA ENERGY STAR ®    
 
ENERGY STAR® is a U.S. registered mark. As an ENERG Y STAR® Partner, AOC International (Europe) GmbH has determined that this 
product meets the ENERGY STAR® guidelines for energ y efficiency. 
    
Preset Display Modes   
STAND   RESOLUTION   HORIZONTAL  
FREQUENCY(kHZ)   VERTICAL 
 
FREQUENCY(Hz)  
VGA    640x480  31.469    60 
640x480  37.861  72 
  
						

							640x480  37.5    75 
SVGA    800x600  35.156    56 
800x600  37.879    60 800x600  48.077    72 800x600  46.875    75 
XGA    1024x768  48.363    60 
1024x768  56.476    70 1024x768  60.023    75 
SXGA    1280x1024  63.981    60 
1280x1024  79.976    75 
WXGA    1440x900    55.935  59.8 WSXGA    1680x1050  65.29  60 
 Pin Assignments 
 
Pin Number   15-Pin Side of the Signal Cable  
1  Video-Red 2  Video-Green 3  Video-Blue 4  N.C. 5  Ground 6  GND-R 7  GND-G 8  GND-B 9  +5V 10  Detect Cable 
  
						

							11  N.C. 12  DDC-Serial data 13  H-sync 14  V-sync 15  DDC-Serial clock 
  
Pin No. 
Signal Name  
Pin No. 
Signal Name  
Pin No. 
Signal Name  
1 
TMDS Data 2- 
9 
TMDS Data 1- 
17 
TMDS Data 0- 
2 
TMDS Data 2+ 
10 
TMDS Data 1+ 
18 
TMDS Data 0+ 
3 
TMDS Data 2/4 Shield 
11 
TMDS Data 1/3 Shield 
19 
TMDS Data 0/5 Shield 
4 
TMDS Data 4- 
12 
TMDS Data 3- 
20 
TMDS Data 5- 
5 
TMDS Data 4+ 
13 
TMDS Data 3+ 
21 
TMDS Data 5+ 
6 
DDC Clock 
14 
+5V Power 
22 
TMDS Clock Shield 
7 
DDC Data 
15 
Ground(for+5V) 
23 
TMDS Clock + 
8 
N.C. 
16 
Hot Plug Detect 
24 
TMDS Clock - 
Plug and Play   
Plug & Play DDC2B Feature  
This monitor is equipped with VESA DDC2B capabiliti es according to the VESA DDC STANDARD. It allows th e monitor to inform the host 
system of its identity and, depending on the level  of DDC used, communicate additional information abo ut its display capabilities. 
The DDC2B is a bi-directional data channel based on  the I
2C protocol. The host can request EDID information over the DDC2B channel.