AOC 2236swa User Manual

							- 11 - 
The recommended resolution for this monitor is 1920 by 1080. To setup the monitor to this resolution, follow the steps 
below. 
For Windows Vista: 
1 Click START.  
2 Click CONTROL PANEL. 
 
 
3 Click Appearance and Personalization. 
 
 
4 Click Personalization  
 
 
 
 
 
						

							- 12 - 
5 Click Display Settings.  
 
 
6 Set the resolution SLIDE-BAR to 1920 by 1080.  
  
 
For Windows XP: 
1 Click START.  
2 Click SETTINGS. 
3 Click CONTROL PANEL.  
 
 
 
 
						

							- 13 - 
4 Click Appearance and Themes. 
 
5 Double click DISPLAY.  
 
6 Click SETTINGS. 
7 Set the resolution SLIDE-BAR to 1920 by 1080.  
 
For Windows ME/2000: 
1 Click START.  
2 Click SETTINGS.  
3 Click CONTROL PANEL.  
4 Double click DISPLAY.  
5 Click SETTINGS.  
6 Set the resolution SLIDE-BAR to 1920 by 1080.  
 
						

							- 14 -  HOTKEYS
 
  
   
Power 
         Press to turn on or turn off the monitor. 
4:3 or wide  / Up   
                 Press 
key to change the screen aspect ratio between standard 4：3format or Wide format.   When the input 
resolution is wide format, the aspect ratio hotkey is disabled. When the main menu or sub-menu is active, the 
key functions 
as to select up or increase value.  
Auto / Down 
Auto configure hot key: When the OSD is closed, press Auto button to do auto configure. 
 
 
OSD SETTING
 
 
						

							- 15 - 
  Eco mode ---DCR, Standard, Text, Internet, Game, Movie, Sports  
DCR 
 
 
Standard 
 
 
 
 
 
 
 
 
						

							- 16 - 
TEXT 
 
INTERNET 
 
Game 
 
 
						

							- 17 - 
Movie 
 
Sports 
 
 
 
 
Notes : When Eco mode is not set as “Standard”, Contrast and Brightness can not be adjusted; When DCR is set as “On”, 
Contrast, Brightness, Eco mode and Gamma can not be adjusted.  
  
 
 
 
 
 
 
 
						

							- 18 -  LED INDICATOR 
 
Status LED Color   
Full Power Mode Blue  
Active-off Mode Orange 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							- 19 - 
DRIVER INSTALLATION GUIDE 
 
 
Windows 2000 
  Start Windows® 2000  
2. Click on the Start button, point to Settings, and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advanced....  
5. Select Monitor  
- If the Properties button is inactive, it means your monitor is properly configured. Please stop installation.  
- If the Properties button is active. Click on Properties button. Please follow the steps given below.  
6. Click on Driver and then click on Update Driver... then click on the Next button.  
7. Select Display a list of the known drivers for this device so that I can choose a specific driver, then click on 
   Next and then click on Have disk....  
8. Click on the Browse... button then select the appropriate drive F: ( CD-ROM Drive).  
9. Click on the Open button, then click on the OK button.  
10. Select your monitor model and click on the Next button.  
11. Click on the Finish button then the Close button.  
If you can see the Digital Signature Not Found window, click on the Yes button.  
Windows ME 
1. Start Windows® Me  
2. Click on the Start button, point to Settings, and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advanced....  
5. Select the Monitor button, then click on Change... button.  
6. Select Specify the location of the driver(Advanced) and click on the Next button.  
7. Select Display a list of all the drivers in a specific location, so you can choose the driver you want 
, then click on Next and then click on Have Disk....  
8. Click on the Browse... button, select the appropriate drive F: ( CD-ROM Drive) then click on the OK button.  
9. Click on the OK button, select your monitor model and click on the Next button.  
10. Click on Finish button then the Close button.  
Windows XP 
1. Start Windows® XP  
2. Click on the Start button and then click on Control Panel.  
 
 
 
 
						

							- 20 - 
3. Select and click on the category ‘Appearance and Themes’ 
 
 
4. Click on the Display Item.  
 
 
5. Select the Settings tab then click on the Advanced button.  
 
 
6. Select Monitor tab 
- If the Properties button is inactive, it means your monitor is properly configured. Please stop installation. 
- If the Properties button is active, click on Properties button. 
Please follow the steps below.