AOC 2330v User Manual

2330V User’s Manual 
 
The following subsections describe notational conventions used in this document.  
Notes, Cautions, and Warnings 
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These 
blocks are notes, cautions, and warnings, and they are used as follows: 
 NOTE: A NOTE indicates important information that helps you make better use of your computer 
system.  
 CAUTION: A CAUTION indicates either potential damage to hardware or loss...

 
 
 
The monitor should be operated only from the type of power source indicated on the label. If you are not sure 
of the type of power supplied to your home, consult your dealer or local power company. 
 
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will 
fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire 
plug, have an electrician install the correct outlet, or use an adapter to...

 
 
 Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure 
a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table 
recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when 
installing the product and use mounting accessories recommended by the manufacturer. A product and cart 
combination should be moved with care.  
 
Never push any object into the...

 
 
Clean the cabinet regularly with the cloth provided.  You can use soft-detergent to wipe out the stain, instead of  
strong-detergent which will cauterize the product cabinet.  
 
When cleaning, make sure no detergent is leaked into the product.   The cleaning cloth should not be too rough 
as it will scratch the screen surface.  
 Please disconnect the power cord before cleaning the product.  
 
 
 
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and...

 
Notes: 
Analog cable or DVI cable is not available for all countries and regions, please check with the dealer or official 
department of AOC for confirmation .  
 
 

Please setup or remove the base following the steps as below. 
 
 For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitors angle 
to your own preference.  
 Hold the stand so you will not topple the monitor when you change the monitors angle.  
 You are able to adjust the monitors angle from -5° to 20 °.  
 
NOTE: 
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  
 
 
 
 

Cable Connections On Back of Monitor and Computer 
 
1. Power 
2. Analog (DB-15 VGA cable)  
3.DVI 
  
To protect equipment, always turn off the PC and LCD monitor before connecting.  
1. Connect the power cable to the AC port on the back of the monitor.  
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the 
computers D-Sub port.  
3. (Optional – Requires a video card with DVI port) - Connect one end of the DVI cable to the back of the 
monitor and...

Preparing to Install An Optional Wall Mounting Arm.  
 
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this 
procedure. Follow these steps: 
1. Remove the base.  
2. Follow the manufacturers instructions to assemble the wall mounting arm.  
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the 
back of the monitor.  
4. Insert the 4 screws into the holes and tighten.  
5. Reconnect the cables....

The recommended resolution for this monitor is 1920 by 1080. To setup the monitor to this resolution, follow the steps below. 
For Windows Vista: 
1 Click START.  
2 Click CONTROL PANEL. 
 
 
3 Click Appearance and Personalization. 
 
 4 Click Personalization