AOC 2341va User Manual

							
 
51
Specification 
General Specification 
Model number   2341Vg 
Driving system   TFT Color LCD   
Viewable Image Size 58.5cm diagoanl 
Pixel pitch   0.2655mm(H) x 0.2655mm(V) 
Video  R, G, B Analog lnterface   
Separate Sync.   H/V TTL 
Display Color   16.7M Colors   
Panel  
Dot Clock   148.5 MHz   
Horizontal scan range   30 kHz - 80 kHz 
Horizontal scan Size(Maximum)      509.76 mm  
Vertical scan range   55 Hz - 75 Hz   
Vertical scan Size(Maximum)   286.74mm  
Optimal preset resolution   1920 x 1080 (60 Hz) 
Highest preset resolution   1920 x 1080 (60  Hz)   
Plug & Play   VESA DDC2B/CI   
Input Connector   D-Sub 15pin & DVI 24pin   
Input Video Signal    Analog: 0.7Vp-p(standard), 75 OHM, Positive
& DVI-D Digital Interface (TMDS)    
Power Source   100~240VAC, 50/60Hz   
Active < 30 W   
Resolution  
Power Consumption   
Standby < 0.1 W   
Connector Type   15-pin Mini D-Sub & 24-pin DVI   
Signal Cable Type   Detachable  
Dimensions & Weight:    
Height (with base)    412.5 mm 
Width   619.7 mm 
Depth   186.8 mm 
Physical 
Characteristics 
Weight (monitor only)      5.55 kg 
Temperature:      
Operating  0°C to 40° C  
Non-Operating  -25°Cto 55°C 
Humidity:      
Operating  10% to 85% (non-condensing)   
Environmental  
Non-Operating  5% to 93% (non-condensing)   
 
						

							
 52
Altitude:      
Operating  0~ 3,658m (0~ 12,000 ft )   
Non-Operating  0~ 12,192m (0~ 40,000 ft )   
Preset Display Modes 
STANDARD 
RESOLUTION  HORIZONTAL 
FREQUENCY(KHz)  VERTICAL 
FREQUENCY(Hz) 
VGA  640x480@60Hz 31.469kHz  59.94 
Hz 640x480@72Hz 37.861kHz  72.809  Hz 
640x480@75Hz 37.5kHz  75 Hz 
SVGA 800x600@56Hz 35.156kHz  56.25 
Hz 800x600@60Hz 37.879kHz  60.317  Hz 
800x600@72Hz 48.077kHz  72.188Hz 
800x600@75Hz 46.875kHz  75 Hz 
XGA 1024x768@60Hz 48.363kHz  60.004 Hz 1024x768@70Hz 56.476kHz  70.069 Hz 
1024x768@72Hz 57.669kHz  71.996 Hz 
1024x768@75Hz 60.023kHz  75.029 Hz 
SXGA 1280x1024@60Hz 63.981kHz  60.02 Hz 1280x1024@70Hz 74.882kHz  69.853 Hz 
1280x1024@72Hz 63.981kHz  60.02 Hz 
1280x1024@75Hz 79.976kHz  75.025 Hz 
WXGA 
1440x900@60Hz 55.935kHz  55.876 Hz 
WSXGA 1680x1050@60Hz 65.29kHz  59.95Hz 
***  1152x864@75Hz 67.5kHz  75Hz 
1280x960@60Hz 60kHz 
60Hz 
HD 
1920x1080@60Hz 67.5kHz  59.934Hz 
IBM-MODE DOS  720x400@70Hz 31.469kHz  70.087Hz 
MAC MODE VGA 640x480@67Hz 35kHz  66.667Hz 
MAC MODE SVGA 
832x624@75Hz 49.725kHz  74.551Hz 
 
 
						

							
 53
Pin Assignments 
   
 
Pin Number 15-Pin Side of the Signal Cable 
1 Video-Red 
2 Video-Green 
3 Video-Blue 
4 N.C. 
5 Detect Cable 
6 GND-R 
7 GND-G 
8 GND-B 
9 +5V 
10 Ground 
11  N.C. 
12 DDC-Serial data 
13 H-sync 
14 V- s yn c  
15 DDC-Serial clock 
 
 
 
Pin No.  Signal Name  Pin No.  Signal Name  Pin No. Signal Name  
1  TMDS Data 2-  9  TMDS Da ta 1-  17  TMDS Data 0- 
2  TMDS Data 2+  10  TMDS Data 1+  18  TMDS Data 0+ 
3 TMDS Data 2/4 
Shield  11 TMDS Data 1/3 
Shield  19 TMDS Data 0/5 
Shield 
4  TMDS Data 4-  12  TMDS Da ta 3-  20  TMDS Data 5- 
5  TMDS Data 4+  13  TMDS Data 3+  21  TMDS Data 5+ 
6  DDC Clock  14  +5V Power  22  TMDS Clock 
Shield 
7  DDC Data  15  Ground(for+5V)  23  TMDS Clock + 
8  N.C.  16  Hot Plug Detect  24  TMDS Clock - 
 
						

							
 54
 
 
Plug and Play 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the 
monitor to inform the host system of its identity and,
 depending on the level of DDC used, communicate additional 
information about its display capabilities. 
 
The DDC2B is a bi-directional data channel based on the  I2C protocol. The host can request EDID information over 
the DDC2B channel.
 
						

							
 55
Regulation 
FCC Notice 
 
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) 
 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, us es and can radiate radio frequency energy, and if not 
installed and used in accordance with the instructions,  may cause harmful interference to radio communications. 
However, there is no guarantee that inte rference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television receptio n, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the in terference by one or more of the following measures: 
 
Reorient or relocate the receiving antenna.   
Increase the separation between the equipment and receiver.   
Connect the equipment into an outlet on a circuit differ ent from that to which the receiver is connected.   
Consult the dealer or an experienced radio/TV technician for help.   
 
 
NOTICE : 
 
The changes or modifications not expressly approved by the  party responsible for compliance could void the users 
authority to operate the equipment.   
Shielded interface cables and AC power cord, if any, must  be used in order to comply with the emission limits.   
The manufacturer is not responsible for any radio or TV  interference caused by unauthorized modification to this 
equipment. It is the responsibilities of the user to correct su ch interference. It is the responsibility of the user to 
correct such interference.
 
						

							
 56
WEEE Declaration 
Disposal of Waste Equipment by Users in Private Household in the European Union.   
 
 
This symbol on the product or on its packaging indicates t hat this product must not be disposed of with your other 
household waste.Instead, it is your responsibility to dis pose of your waste equipment by handing it over to a 
designated collection point for the recycling of waste el ectrical and electronic equipment.The separate collection 
and recycling of your waste equipment at the time of di sposal will help to conserve natural resources and ensure 
that it is recycled in a manner that  protects human health and the environment. For more information about where 
you can drop off your waste equipment for recycling, pleas e contact your local city office, your household waste 
disposal service or the shop where you purchased the product . 
 
 
HG Declaration 
SAFETY: Lamp Disposal   
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY  AND MUST BE RECYCLED OR DISPOSED OF 
ACCORDING TO LOCAL,  STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE 
ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG
. 
 
 
 
						

							
 57
EPEAT Declaration 
 
EPEAT is a system to help purchasers in the public an d private sectors evaluate, compare and select desktop 
computers, notebooks and monitors ba sed on their environmental attributes. EPEAT also provides a clear and 
consistent set of performance criteria  for the design of products, and provides  an opportunity for manufacturers to 
secure market recognition for efforts to r educe the environmental impact of its products.   
 
 
AOC believes in protecting the environment. 
With a key concern for the conservation of natural resources, as well as land  ll protection, AOC announces the 
launch of AOC monitor’s packaging recycling program. This  program is designed to help you discard of your 
monitor carton and   ller materials properly. If a local recycling center is not available, AOC will recycle the 
packaging material for you, including foam   ller and carton. AOC Display solution will only recycle AOC monitor 
packaging. Please refer to the following website address: 
 
Only for North and South American, excluding Brazil: 
http://us.aoc.com/about/environmental_impact
 
 
For Germany:   
http://www.aoc-europe.com/en/service/tco.php
 
 
For Brazil:   
http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134
 
						

							
 58
Service 
Warranty Statement for Europe 
LIMITED THREE-YEAR WARRANTY*   
AOC Color Monitors sold within Europe   
AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a 
period of Three (3) years after the original date of c onsumer purchase. During this period, AOC International 
(Europe) GmbH will, at its option, either  repair the defective product with new or  rebuilt parts, or replace it with a 
new or rebuilt product at no charge except as *stated bel ow. The defective products that are replaced become the 
property of AOC International (Europe) GmbH.   
 
If the product appears to be defective, please contact your  local dealer or refer to the warranty card when attached 
to the product.   
 
Deliver the product freight pre-paid, along with the dated  proof of purchase, to the AOC Authorized Service Center. 
If you cannot deliver the product in person:   
 
Pack it in its original shipping container (or equivalent)   
Put the RMA number on the address label   
Put the RMA number on the shipping carton   
Insure it (or assume the risk of loss/damage during shipment)   
Pay all shipping charges   
 
AOC International (Europe) GmbH is responsible neither  for any damage or loss during inbound transport damage 
nor to inbound product that was not properly packaged.   
 
AOC International (Europe) GmbH will pay the return shippi ng charges within one of the countries specified within 
this warranty statement. AOC International (Europe) GmbH  is not responsible for any costs associated with the 
transportation of product across international borders. This  includes the international border within the European 
Union.  
 
* This limited warranty does not cover any losse s or damages that occur as a result of   
Shipping or improper installation or maintenance   
Misuse  
Neglect  
Any cause other than ordinary commercial or industrial application   
Adjustment by non-authorized source   
Repair, modification, or installation of options or parts  by anyone other than an AOC Authorized Service Center   
Improper environment   
Excessive or inadequate heating or air conditioning or electr ical powers failures, surges, or other irregularities   
 
This limited warranty does not cover any of the product fi rmware or hardware that you or any third party have 
 
						

							
 59
modified or altered; you bear the sole responsibility and liability for any such modification or alteration. 
 
ALL EXPRESS AND IMPLIED WARRANTIES FOR TH
IS PRODUCT (INCLUDING THE WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A 
PERIOD OF THREE (3) YEARS FOR PARTS AND L ABOR FROM THE ORIGINAL DATE OF CONSUMER 
PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.   
 
AOC INTERNATIONAL (EUROPE) GMBH OBLIGAT IONS AND YOUR REMEDIES HEREUNDER ARE SOLELY 
AND EXCLUSIVELY AS STATED HERE.   AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER 
BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED 
THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO 
EVENT SHALL AOC INTERNATIONAL (EUROPE) GMBH  BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF 
USE OR FACILITIES OR EQUIPMENT, OR OTHER I NDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. 
SOME STATES DO NOT ALLOW THE EXCLUSION OR  LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APP LY TO YOU. ALTHOUGH THIS LIMITED WARRANTY 
GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM 
COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS  ONLY VALID FOR PRODUCTS PURCHASED IN THE 
MEMBER COUNTRIES OF THE EUROPEAN UNION.   
 
 
Information in this document is subject to change without notice. 
For more details, please visit:  http://www.aoc-europe.com/en/service/index.php 
 
 
						

							
 60
Warranty Statement for North & South America (excluding Brazil) 
WARRANTY STATEMENT     
for AOC Color Monitors 
Including those Sold within North America as Specified 
 
Envision Peripherals, Inc. warrants this product to be free  from defects in material and workmanship for a period of 
three (3) years for parts & labor and one (1) year for CRT  Tube or LCD Panel after the original date of consumer 
purchase. During this period, EPI ( EPI is the abbreviation of  Envision Peripherals, Inc. ) will, at its option, either 
repair the defective product with new or rebuilt parts, or  replace it with a new or rebuilt product at no charge except 
as *stated below. The parts or product that  are replaced become the property of EPI. 
 
In the USA to obtain service under this limited warranty,  call EPI for the name of the Authorized Service Center 
closest to your area. Deliver the product freight pre-pa id, along with the dated proof of purchase, to the EPI 
Authorized Service Center. If you can not deliver the product in person: 
 
Pack it in its original shipping container (or equivalent)   
Put the RMA number on the address label   
Put the RMA number on the shipping carton   
Insure it (or assume the risk of loss/damage during shipment)   
Pay all shipping charges   
 
EPI is not responsible for damage to inbound product that was not properly packaged. 
EPI will pay the return shipment charges within one of t he countries specified within this warranty statement. EPI is 
not responsible for any costs associat ed with the transportation of product across international borders. This 
includes the international borders of the  countries within this warranty statements. 
 
In the United States and Canada contact your Dealer or  EPI Customer Service, RMA Department at the toll free 
number (888) 662-9888. Or you can request an RM A Number online at www.aoc.com/na-warranty. 
 
* This limited warranty does not cover any losse s or damages that occur as a result of:   
 
Shipping or improper installation or maintenance   
Misuse  
Neglect  
Any cause other than ordinary commercial or industrial application   
Adjustment by non-authorized source   
Repair, modification, or installation of options or part s by anyone other than an EPI Authorized Service Center   
Improper environment   
Excessive or inadequate heating or air conditioning or elec trical power failures, surges, or other irregularities   
 
This three-year limited warranty does not cover any of t he products firmware or hardware that you or any third 
party have modified or altered; you bear the sole respons ibility and liability for any such modification or alteration.