AOC E2237fwh User Manual

							
 
 41
11. Select the
 xxx.inf file and click the  “Open” button. Click the “OK”  button.  
 
12. Select your monitor model and click the  “Next” button. The files will be copi ed from the CD to your hard disk 
drive.  
 
13. Close all open windows and remove the CD.   
 
14. Restart the system. The system will  automatically select the maximum refresh rate and corresponding Color 
Matching Profiles.   
 
 
 
 
 
 
 
 
 
						

							
 
 42
Windows Vista 
 
1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". 
    
  
2. Click "Personalization" and then "Display Settings". 
   
 
3. Click "Advanced Settings...". 
    
 
 
						

							
 
 43
4. Click "Properties" in the "Monitor" tab. If the "Properties" 
button is deactivated, it means the configuration for your 
monitor is completed. The monitor can be used as is. 
If the message "Windows needs..." is displayed,  as shown in the figure below, click "Continue". 
   
 
5. Click "Update Driver..." in the "Driver" tab.   
   
 
6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers 
on my computer". 
 
 
7. Click on the 'Have disk...' button,  then click on the 'Browse...' button and then select the appropriate drive 
F:\Driver (CD-ROM Drive).   
8. Select your monitor model  and click on the 'Next' button. 
9. Click "Close"  → "Clos e" → "OK"  →  "OK" on the following screens displayed in sequence.
 
						

							
 
 44
Windows XP 
 
1. Start Windows® XP   
2. Click on the 'Start' button and then click on 'Control Panel'.   
 
 
3. Select and click on the category ‘Appearance and Themes’ 
 
 
4. Click on the 'Display' Item.   
 
    
 
						

							
 
 45
5. Select the 'Settings' tab then
 click on the 'Advanced' button.   
 
 
6. Select 'Monitor' tab 
- If the 'Properties' button is inactive, it means your m onitor is properly configured. Please stop installation. 
- If the 'Properties' button is active, click on 'Properties' button. 
Please follow the steps below.   
 
 
7. Click on the 'Driver' tab and then  click on 'Update Driver...' button.   
 
   
 
						

							
 
 46
8. Select the 'Install from a list or specific location [
advanced]' radio button and then click on the 'Next' button.   
 
 
9. Select the 'Don't Search. I will choose the driver to  install' radio button. Then click on the 'Next' button.   
 
 
10. Click on the 'Have disk...' button,  then click on the 'Browse...' button and  then select the appropriate drive F: 
(CD-ROM Drive).   
 
11. Click on the 'Open' button, then click the 'OK' button.   
12. Select your monitor model and click on the 'Next' button. 
- If you can see the 'has not passed Windows® Logo testing  to verify its compatibility with Windows® XP' message, 
please click on the 'Continue Anyway' button.   
13. Click on the 'Finish' butto n then the 'Close' button.   
14. Click on the 'OK' button and then the 'OK' button  again to close the Display Properties dialog box. 
 
						

							
 
 47
Windows 2000 
 
1. Start Windows® 2000   
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.   
3. Double click on the 'Display' Icon.   
4. Select the 'Settings' tab then click on 'Advanced...'.   
5. Select 'Monitor'   
- If the 'Properties' button is inactive, it means your moni tor is properly configured. Please stop installation.   
- If the 'Properties' button is active. Click on 'Properti es' button. Please follow the steps given below.   
6. Click on 'Driver' and then cl ick on 'Update Driver...' then c lick on the 'Next' button.   
7. Select 'Display a list of the known dr ivers for this device so that I can choose  a specific driver', then click on 'Next' 
and then click on 'Have disk...'.   
8. Click on the 'Browse...' button then select  the appropriate drive F: ( CD-ROM Drive).   
9. Click on the 'Open' button, then click on the 'OK' button.   
10. Select your monitor model and click on the 'Next' button.   
11. Click on the 'Finish' button then the 'Close' button.   
If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.   
 
 
 
Windows ME 
 
1. Start Windows® Me   
2. Click on the 'Start' button, point to 'S ettings', and then click on 'Control Panel'.   
3. Double click on the 'Display' Icon.   
4. Select the 'Settings' tab then click on 'Advanced...'.   
5. Select the 'Monitor' button,  then click on 'Change...' button.   
6. Select 'Specify the location of the driv er(Advanced)' and click on the 'Next' button.   
7. Select 'Display a list of all the drivers in a specific location, so you can c hoose the driver you want', then click on 
'Next' and then click on 'Have Disk...'.   
8. Click on the 'Browse...' button, select  the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.   
9. Click on the 'OK' button, select your moni tor model and click on the 'Next' button.   
10. Click on 'Finish' button then the 'Close' button.   
 
						

							
 
 48
i-Menu 
 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on 
screen menus instead of the OSD button on  the monitor. To complete installation, please follow the installation 
guide.  
 
 
 
 
						

							
 
49
 
 
 
e-Saver 
 
Welcome to use AOC e-Saver monitor power management  software! The AOC e-Saver features Smart Shutdown 
functions for your monitors, allows your monitor to timely  shutdown when PC unit is at any status (On, Off, Sleep or 
Screen Saver); the actual shutdown time depends  on your preferences (see example below). 
Please click on driver/e-Saver/setup.ex e to start installing the e-Saver software, follow the install wizard to 
complete software installation. 
 
Under each of the four PC status, you  may choose from the pull-down menu the desired time (in minutes) for your 
monitor to automatically shutdown.  The example above illustrated:   
1)  The monitor will never shutdown when the PC is powered on.     
2)  The monitor will automatically shutdown  5 minutes after the PC is powered off. 
3)  The monitor will automatically shutdown 10  minutes after the PC is in sleep/stand-by mode. 
4)  The monitor will automatically shutdown  20 minutes after the screen saver appears.    
 
 
You can click “RESET” to set the e-Save r to its default settings like below. 
 
 
 
						

							
 50 
POP Art Sticker 
AOC has prepared 3 patterns of pop art stickers for you. Please note that each sticker is divided into 2 pieces. You 
may pick your favorite pattern, tear it  off from left and right side, and attach them to your monitor chin. Try to align 
with both sides of the chin, and now you have a personalized monitor!