Home > AOC > Monitor > AOC E2241vwa User Manual

AOC E2241vwa User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual AOC E2241vwa User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 AOC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
     41
    10. Click the 
    “Have Disk”  button. Click on the  “Browse” button and navigate to the following directory:   
    X:\Driver\module name    (where X is the drive letter designator for the CD-ROM drive). 
     
     
     
    11. Select the  xxx.inf file and click the  “Open” button. Click the  “OK” button.  
     
    12. Select your monitor model and click the  “Next” button. The files will be copi ed from the CD to your hard disk 
    drive.  
     
    13. Close all open windows and remove the CD.   
     
    14. Restart the system. The system will  automatically select the maximum refresh rate and corresponding Color 
    Matching Profiles.   
     
     
     
     
     
     
     
     
     
    						
    							
     42
    Windows Vista 
     
    1. Click Start  and Control Panel. Then, double-click on Appearance and Personalization. 
        
      
    2. Click Personalization and then Display Settings. 
       
     
    3. Click Advanced Settings.... 
        
     
     
    						
    							
     43
    4. Click Properties in the Monitor tab. If the Properties 
    button is deactivated, it means the configuration for your 
    monitor is completed. The monitor can be used as is. 
    If the message Windows needs... is displayed,  as shown in the figure below, click Continue. 
       
     
    5. Click Update Driver... in the Driver tab.   
       
     
    6. Check the Browse my computer for driver software che ckbox and click Let me pick from a list of device drivers 
    on my computer. 
     
     
    7. Click on the Have disk... button,  then click on the Browse... button and then select the appropriate drive 
    F:\Driver (CD-ROM Drive).   
    8. Select your monitor model  and click on the Next button. 
    9. Click Close  → Close  → OK  →  OK on the following screens displayed in sequence.
     
    						
    							
     44
    Windows XP 
     
    1. Start Windows® XP   
    2. Click on the Start button and then click on Control Panel.   
     
     
    3. Select and click on the category ‘Appearance and Themes’ 
     
     
    4. Click on the Display Item.   
     
        
     
    						
    							
     45
    5. Select the Settings tab then
     click on the Advanced button.   
     
     
    6. Select Monitor tab 
    - If the Properties button is inactive, it means your m onitor is properly configured. Please stop installation. 
    - If the Properties button is active, click on Properties button. 
    Please follow the steps below.   
     
     
    7. Click on the Driver tab and then  click on Update Driver... button.   
     
       
     
    						
    							
     46
    8. Select the Install from a list or specific location [
    advanced] radio button and then click on the Next button.   
     
     
    9. Select the Dont Search. I will choose the driver to  install radio button. Then click on the Next button.   
     
     
    10. Click on the Have disk... button,  then click on the Browse... button and  then select the appropriate drive F: 
    (CD-ROM Drive).   
     
    11. Click on the Open button, then click the OK button.   
    12. Select your monitor model and click on the Next button. 
    - If you can see the has not passed Windows® Logo testing  to verify its compatibility with Windows® XP message, 
    please click on the Continue Anyway button.   
    13. Click on the Finish butto n then the Close button.   
    14. Click on the OK button and then the OK button  again to close the Display Properties dialog box. 
     
    						
    							
     47
    Windows 2000 
     
    1. Start Windows® 2000   
    2. Click on the Start button, point to Settings, and then click on Control Panel.   
    3. Double click on the Display Icon.   
    4. Select the Settings tab then click on Advanced....   
    5. Select Monitor   
    - If the Properties button is inactive, it means your moni tor is properly configured. Please stop installation.   
    - If the Properties button is active. Click on Properti es button. Please follow the steps given below.   
    6. Click on Driver and then cl ick on Update Driver... then c lick on the Next button.   
    7. Select Display a list of the known dr ivers for this device so that I can choose  a specific driver, then click on Next 
    and then click on Have disk....   
    8. Click on the Browse... button then select  the appropriate drive F: ( CD-ROM Drive).   
    9. Click on the Open button, t hen click on the OK button.   
    10. Select your monitor model and click on the Next button.   
    11. Click on the Finish button then the Close button.   
    If you can see the Digital Signature Not Found window, click on the Yes button.   
     
     
     
    Windows ME 
     
    1. Start Windows® Me   
    2. Click on the Start button, point to S ettings, and then click on Control Panel.   
    3. Double click on the Display Icon.   
    4. Select the Settings tab then click on Advanced....   
    5. Select the Monitor button,  then click on Change... button.   
    6. Select Specify the location of the driv er(Advanced) and click on the Next button.   
    7. Select Display a list of all the driv ers in a specific location, so you can c hoose the driver you want, then click on 
    Next and then click on Have Disk....   
    8. Click on the Browse... button, select  the appropriate drive F: ( CD-ROM Drive) then click on the OK button.   
    9. Click on the OK button, select your moni tor model and click on the Next button.   
    10. Click on Finish button then the Close button.   
     
    						
    							
     48
    i-Menu 
     
    Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on 
    screen menus instead of the OSD button on  the monitor. To complete installation, please follow the installation 
    guide.  
     
    						
    							
     
    49
     
     
     
    e-Saver 
     
    Welcome to use AOC e-Saver monitor power management  software! The AOC e-Saver features Smart Shutdown 
    functions for your monitors, allows your monitor to timely  shutdown when PC unit is at any status (On, Off, Sleep or 
    Screen Saver); the actual shutdown time depends  on your preferences (see example below). 
    Please click on driver/e-Saver/setup.ex e to start installing the e-Saver software, follow the install wizard to 
    complete software installation. 
     
    Under each of the four PC status, you  may choose from the pull-down menu the desired time (in minutes) for your 
    monitor to automatically shutdown.  The example above illustrated:   
    1)  The monitor will never shutdown when the PC is powered on.     
    2)  The monitor will automatically shutdown  5 minutes after the PC is powered off. 
    3)  The monitor will automatically shutdown 10  minutes after the PC is in sleep/stand-by mode. 
    4)  The monitor will automatically shutdown  20 minutes after the screen saver appears.    
     
     
    You can click “RESET” to set the e-Save r to its default settings like below. 
     
     
     
    						
    							
     50
    SRS 
     
     
    WOW HD™ significantly improves the playback quality  of audio, delivering a dynamic 3D entertainment 
    experience with deep, rich bass and high frequency clarity for crisp detail. To complete installation, please follow 
    the installation guide. 
     
     
    						
    All AOC manuals Comments (0)

    Related Manuals for AOC E2241vwa User Manual