AOC E2795vh User Manual

							 41
10. Click the 
“Have Disk”  button. Click on the  “Browse” button and navigate to the following directory:   
X:\Driver\module name    (where X is the drive letter designator for the CD-ROM drive). 
 
 
 
11. Select the  "xxx.inf" file and click the  “Open” button. Click the  “OK” button.  
 
12. Select your monitor model and click the  “Next” button. The files will be copi ed from the CD to your hard disk 
drive.  
 
13. Close all open windows and remove the CD.   
 
14. Restart the system. The system will  automatically select the maximum refresh rate and corresponding Color 
Matching Profiles.   
 
 
 
 
 
 
 
 
 
						

							 42
Windows Vista 
 
1. Click Start  and Control Panel. Then, double-click on Appearance and Personalization. 
    
  
2. Click Personalization and then Display Settings. 
   
 
3. Click Advanced Settings.... 
    
 
 
						

							 43
4. Click Properties in the Monitor tab. If the Properties 
button is deactivated, it means the configuration for your 
monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed,  as shown in the figure below, click Continue. 
   
 
5. Click Update Driver... in the Driver tab.   
   
 
6. Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers 
on my computer. 
 
 
7. Click on the Have disk... button,  then click on the Browse... button and then select the appropriate drive 
F:\Driver (CD-ROM Drive).   
8. Select your monitor model  and click on the Next button. 
9. Click Close  → Close → OK →  OK on the following screens displayed in sequence.
 
						

							 44
Windows XP 
 
1. Start Windows® XP   
2. Click on the Start button and then click on Control Panel.   
 
 
3. Select and click on the category ‘Appearance and Themes’ 
 
 
4. Click on the Display Item.   
 
    
 
						

							 45
5. Select the Settings tab then
 click on the Advanced button.   
 
 
6. Select Monitor tab 
- If the Properties button is inactive, it means your m onitor is properly configured. Please stop installation. 
- If the Properties button is active, click on Properties button. 
Please follow the steps below.   
 
 
7. Click on the Driver tab and then  click on Update Driver... button.   
 
   
 
						

							 46
8. Select the Install from a list or specific location [
advanced] radio button and then click on the Next button.   
 
 
9. Select the Dont Search. I will choose the driver to  install radio button. Then click on the Next button.   
 
 
10. Click on the Have disk... button,  then click on the Browse... button and  then select the appropriate drive F: 
(CD-ROM Drive).   
 
11. Click on the Open button, then click the OK button.   
12. Select your monitor model and click on the Next button. 
- If you can see the has not passed Windows® Logo testing  to verify its compatibility with Windows® XP message, 
please click on the Continue Anyway button.   
13. Click on the Finish butto n then the Close button.   
14. Click on the OK button and then the OK button  again to close the Display Properties dialog box. 
 
						

							 47
Windows 2000 
 
1. Start Windows® 2000   
2. Click on the Start button, point to Settings, and then click on Control Panel.   
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advanced....   
5. Select Monitor   
- If the Properties button is inactive, it means your moni tor is properly configured. Please stop installation.   
- If the Properties button is active. Click on Properti es button. Please follow the steps given below.   
6. Click on Driver and then cl ick on Update Driver... then c lick on the Next button.   
7. Select Display a list of the known dr ivers for this device so that I can choose  a specific driver, then click on Next 
and then click on Have disk....   
8. Click on the Browse... button then select  the appropriate drive F: ( CD-ROM Drive).   
9. Click on the Open button, then click on the OK button.   
10. Select your monitor model and click on the Next button.   
11. Click on the Finish button then the Close button.   
If you can see the Digital Signature Not Found window, click on the Yes button.   
 
 
 
Windows ME 
 
1. Start Windows® Me   
2. Click on the Start button, point to S ettings, and then click on Control Panel.   
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advanced....   
5. Select the Monitor button,  then click on Change... button.   
6. Select Specify the location of the driv er(Advanced) and click on the Next button.   
7. Select Display a list of all the drivers in a specific location, so you can c hoose the driver you want, then click on 
Next and then click on Have Disk....   
8. Click on the Browse... button, select  the appropriate drive F: ( CD-ROM Drive) then click on the OK button.   
9. Click on the OK button, select your moni tor model and click on the Next button.   
10. Click on Finish button then the Close button.   
 
						

							 48
i-Menu 
 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on 
screen menus instead of the OSD button on  the monitor. To complete installation, please follow the installation 
guide.  
 
						

							 
49
 
 
 
e-Saver 
 
Welcome to use AOC e-Saver monitor power management  software! The AOC e-Saver features Smart Shutdown 
functions for your monitors, allows your monitor to timely  shutdown when PC unit is at any status (On, Off, Sleep or 
Screen Saver); the actual shutdown time depends  on your preferences (see example below). 
Please click on driver/e-Saver/setup.ex e to start installing the e-Saver software, follow the install wizard to 
complete software installation. 
 
Under each of the four PC status, you  may choose from the pull-down menu the desired time (in minutes) for your 
monitor to automatically shutdown.  The example above illustrated:   
1)  The monitor will never shutdown when the PC is powered on.     
2)  The monitor will automatically shutdown  5 minutes after the PC is powered off. 
3)  The monitor will automatically shutdown 10  minutes after the PC is in sleep/stand-by mode. 
4)  The monitor will automatically shutdown  20 minutes after the screen saver appears.    
 
 
You can click “RESET” to set the e-Save r to its default settings like below. 
 
 
 
						

							 50
SRS 
 
 
WOW HD™ significantly improves the playback quality  of audio, delivering a dynamic 3D entertainment 
experience with deep, rich bass and high frequency clarity for crisp detail. To complete installation, please follow 
the installation guide. 
 
 
Screen+   
 
   
Screen+ software is a desktop screen splitting t ool, it splits the desktop into different 
panes, each pane displays a different window.  You only need to drag the window to a 
corresponding pane, when you want to access i t. It supports multiple monitor display to 
make your task easier. Please follow t he installation software to install it.