AOC Lc27h060 User Manual

							 9
Wall-mount instruction 
Attaching The Optional Wall Mount Arm (not supplied) 
 
 
  
 
 
Follow these steps to finish installing the wall mounting arm: 
1.  Place the wall mounting arm onto the back of the TV.  Line up the holes of the arm with the holes in the 
back of the monitor. 
2.  Insert the 4 screws into the holes and tighten. 
3. Reconnect the cables. Refer to the user’s manual t hat came with the optional wall mounting arm for 
instructions on attaching it to the wall.
 
 
NOTE 
z  200mmx100mm VESA high hole (n=4), M4, pitch =0.7 mm, deep =10 mm screw mounting   
kit not included. 
z  Due to safety concerns, if the VESA mounting ki t is purchased separately please make sure the 
mounting kit is UL-Listed, and r eplaceable only by service personnel.
English
 
						

							 10
ACCESSORIES  
 
Thank you for purchasing this LCD-TV. 
This LCD-TV package comes with: 
 
z LCD TV 
z  Pedestal stand 
z  Remote control 
z  Battery AAA x 2 
z  Power Cord 
z  User’s Guide book 
z    Quick Setup Guide 
z   Warranty Card 
 
 
English
 
						

							 11
FRONT PANEL BUTTONS 
 
 
 
 
… Volume Up  
† Volume Down  
‡ On Screen Display Menu On/Off  
ˆ CH Up  
‰ CH Down  
Š Input Source Selection (Enter)  
‹ Power ON/OFF button  
ΠPower LED Indicator  
` Remote Control Receiver 
 
 
_`  
XY 
Z  
[   
\  
]  
^
 
English
 
						

							 12
BACK PANEL BUTTONS 
 
A               
 B C  D  E  F       G          H       I    J K  L M 
 
A Power (AC input) 
B USB Terminal 
C HDMI1 Input Terminal 
D HDMI2 Input Terminal 
E PC Audio  input 
F VGA signal input 
G YPbPr signal input 
H YPbPr signal Audio input (left/right) 
I Audio output (left/right) 
J AV/ S-Video signal Audio input (left/right) 
K Composite Video input 
L S-Video input 
M Cable/ Air TV  input 
N Headphone Jack 
O HDMI3 Input Terminal 
P SPDIF Optical output 
 
N 
 
O 
 
P  
English
 
						

							 13
REMOTE CONTROL 
 
 
English
 
						

							 14
Remote control button function as follows: 
1 POWER Power ON/OFF 
2 INFO Display current information 
3 SLEEP Set timer to turn off TV 
4 ZOOM Adjust window size 
5 0~9, - number Directly channel select 
6 GUIDE Select electronic program guide (EPG) (Only available in DTV 
source) 
7 + VOL - Adjust volume UP/DOWN 
8 EXIT OSD exit 
9 UP/ DOWN/ LEFT/ 
RIGHT/ ENTER 
Move the cursor In OSD menu: UP/ DOWN for OSD function 
select and LEFT/ RIGHT for function adjust 
ENTER:Confirm selection or enter selected menu 
10 INPUT Input source select 
11  MUTE Volume mute ON/OFF 
12 MTS Select Mono, Stereo or SAP sound 
13 TV Direct to TV source 
14 C.C Select caption mode 
15 RETURN Return to previous channel 
16 ▲  CH ▼ Adjust channel UP/DOWN 
17 LIST Select channel from program list 
18 FAV  Select from preset Favorite Channels 
19 MENU On Screen Display (OSD) menu ON/OFF 
 
 
English
 
						

							 15
INSTALLATION 
 
Connecting RF antenna and Cable TV 
Make sure the power is OFF before installing your LCD TV. 
1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV channels into memory with  Auto Scan function when using an antenna TV system. This air 
input jack both support TV and DTV systems.  Besides, the TV system (NTSC) and DTV 
system (ATSC) can be found by the scanning of “AIR” with  Auto Scan function. See page 35. 
2) Cable TV:  Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV 
channels into memory with  Auto Scan function when using a cable TV system. The cable 
input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV) 
and Digital cable system (clear QAM) can be found by the scanning of “Cable”\
 with Auto Scan  
function. See page 35. 
 
Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To 
watch both of them, use an adapter to connect both Air and Cable cables to the jack.  
 
Connecting to DVD / Set Top Box 
Connect Video/Audio cables from compatible devices into the back panel of LCD TV. 
1) With AV cable: 
 
RF Cable, CATV/ Digital cable 
or Adapter (not supplied) 
VCD or DVD Player 
RCA A/V Cable (not supplied) 
English
 
						

							 16
2)  With S-Video cable: 
 
 
3) With YPbPr cable: 
 
 
4)  With HDMI cable: 
 
 
 
 
 
 
 
VCD or DVD Player 
Audio Cable (not supplied)
VCD or DVD Player 
Audio Cable (not supplied) 
HDMI Cable (not supplied)  S-Video Cable (not supplied)
YPbPr Cable (not supplied) VCD or DVD Player 
(DVD Player should have 
the HDMI output terminal)
English
 
						

							 17
Connecting to External Stereo System to Listen to LCD TV Sound 
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo 
system sold separately). 
 
 
Connecting to A/V Device with SPDIF input 
Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV. 
  
 
Connecting to the Headphone 
Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold 
separately).
 
 
 
 
Headphone
(not supplied)
Audio in Cable
(not supplied)
Stereo system
Audio Cable
(not supplied)
A/V Device
Stereo System 
SPDIF Optical Cable 
(not supplied)
English
 
						

							 18
Connecting to a Computer 
1)  With VGA Cable: Connect the VGA cable from VGA output of the co mputer to the VGA terminal input of your 
LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the 
audio input terminal (green) of the LCD TV. 
    
 
2)  With HDMI-DVI Cable:  Connect the HDMI-DVI cable from the DVI output of  the computer to the HDMI terminal input 
of the LCD TV. Also, connect the green end of the Audio In cable from the audio output of your 
computer to the audio input terminal (green) of the LCD TV.
 
 
 
 
 
  VGA 15 Pin Cable (not supplied)
PC
PC Audio In Cable (not supplied)
HDMI-DVI Cable (not supplied) PC
PC Audio In Cable (not supplied)
PC Audio In Cable (not supplied)
PC
HDMI-DVI Cable (not supplied)
English