Home > Apple > Notebook > Apple ibook g4 14 inch early 2004 User Manual

Apple ibook g4 14 inch early 2004 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple ibook g4 14 inch early 2004 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							iBook G4 (14-inch) Take Apart - 40
     How to Add Spiral Tubing to Protect the Inverter Ca-
    How to Add Spiral Tubing to 
    Protect the Inverter Cable
    Important:  The inverter cable can be pinched or damaged during reassembly of the 
    bottom case. To protect the inverter cable, add spiral tubing to the cable, as shown in this 
    procedure. Do not pull, twist, or strain the cable as you perform this procedure.
    Note:  Images shown in this procedure may differ somewhat from the iBook model that 
    you are servicing.
    Tools
    • Soft cloth
    • Black stick (or other nonconductive nylon or plastic tool)
    Preliminary Steps
    Before you begin, remove the following:
    • Battery 
    • Bottom case
    • Bottom shield
    Procedure
    1. With the computer on a soft cloth, peel up the tape that secures the inverter cable to 
    the frame.
    2. Disconnect the inverter cable from the bottom of the logic board. 
    						
    							41 - iBook G4 (14-inch) Take Apart
     How to Add Spiral Tubing to Protect the Inverter Ca- 3. Release the cable from the channel in the frame.
    4. Holding the cable steady, wrap the spiral tubing around the cable at the clutch.
    5. Make sure the tubing covers the cable where it exits the display.
    6. Route the cable through the channel in the frame, and connect it to the logic board. 
    						
    							iBook G4 (14-inch) Take Apart - 42
     How to Add Spiral Tubing to Protect the Inverter Ca-7.Important:  Create enough slack in the cable near the connector to relieve tension on 
    the cable. Secure the connector and cable with a strip of Kapton tape, as shown.
    8. Reassemble and test the computer.  
    						
    							43 - iBook G4 (14-inch) Take Apart
     DC-In Board
    DC-In Board
    Tools
    • Soft cloth
    • #0 Phillips screwdriver
    • Black stick (or other nonconductive nylon or plastic tool)
    Part Location
    Preliminary Steps
    Before you begin, remove the following:
    • Battery 
    • Bottom case
    • Bottom shield 
    						
    							iBook G4 (14-inch) Take Apart - 44
     DC-In Board
    Procedure
    1. With the computer on a soft cloth, disconnect the DC-in cable from the underside of 
    the logic board.
    2. Remove any tape that holds the cable to the frame or logic board.
    3. Route the cable from the guides in the chassis. 
    						
    							45 - iBook G4 (14-inch) Take Apart
     DC-In Board 4. Remove the screw from the DC-in board. 
    5. Tilt up the DC-in board, and pivot it out of the frame.
    6. Remove the DC-in board from the computer assembly. 
    7. Install the replacement DC-in board, and reassemble and test the computer.  
    						
    							iBook G4 (14-inch) Take Apart - 46
     Battery Transfer Board
    Battery Transfer Board
    Tools
    • Soft cloth
    • #0 Phillips screwdriver
    Part Location
    Preliminary Steps
    Before you begin, remove the following:
    • Battery 
    • Bottom case
    • Bottom shield 
    						
    							47 - iBook G4 (14-inch) Take Apart
     Battery Transfer Board
    Procedure
    1. With the computer on a soft cloth, remove the two screws that secure the battery 
    connector board to the computer frame. 
    2. Disconnect the battery transfer board from the logic board.   
    3. Install the replacement battery transfer board, and reassemble and test the computer.  
    						
    							iBook G4 (14-inch) Take Apart - 48
     Top Case
    Top Case
    Tools
    This procedure requires the following tools:
    • Soft cloth
    • Small flat-blade screwdriver
    • #0 Phillips screwdriver (magnetized recommended for optical drive screws)
    • Black stick (or other nonconductive nylon or plastic tool)
    Note: To organize the screws you remove from the computer, use a tray with divided 
    compartments (such as a plastic ice cube tray).
    Part Location
    Preliminary Steps
    Before you begin, remove the following:
    • Battery 
    • Keyboard and RAM shield
    • AirPort Extreme Card 
    						
    							49 - iBook G4 (14-inch) Take Apart
     Top Case • Memory
    • Bottom case 
    • Bottom shield
    • DC-in board
    Procedure
    1. With the computer on a soft cloth, remove the following screws: 
    • Three 4.5-mm long screws with beveled heads at optical drive slot-load area
    • Three 3.5-mm long screws
    • Four 14.5-mm long screws
    • One 12-mm long screw
    Replacement Note: When replacing the screws, install them in the order shown. 
    						
    All Apple manuals Comments (0)

    Related Manuals for Apple ibook g4 14 inch early 2004 User Manual