Apple mac mini User Manual
Have a look at the manual Apple mac mini User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
98 - Mac mini Take Apart Mezzanine Board Removal Procedure Using a jeweler’s #0 Phillips screwdriver, remove the two screws from the mezzanine board. Pull the mezzanine board straight up and off the logic board. Note: refer to Antennas, Mezzanine
Mac mini Take Apart - 99 Mezzanine Board Replacement Procedure 1. Connect the mezzanine board to the logic board connector. Replace the two mezzanine screws. 2. Replace the internal frame. 3. Replace the top housing.
100 - Mac mini Take Apart Modem Board Modem Board Tools This procedure requires the following tools: • Jeweler’s #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Preliminary Steps Before you begin, remove the top housing and the internal frame. Part Location
Mac mini Take Apart - 101 Modem Board Removal Procedure 1. Using a jeweler’s #0 Phillips screwdriver, remove the two screws from the modem board. 2. Using a black stick or other nonconductive nylon or plastic tool, pry the modem board off the logic board connector.
102 - Mac mini Take Apart Modem Board 3. Disconnect the RJ-11 cable from the modem board. Set the modem board aside.
Mac mini Take Apart - 103 Modem Board Replacement Procedure 1. Connect the RJ-11 cable to the modem board. 2. Using a jeweler’s #0 Phillips screwdriver, replace the two modem screws.
104 - Mac mini Take Apart Modem Board 3. Replace the internal frame. 4. Replace the top housing.
Mac mini Take Apart - 105 Logic Board Logic Board Tools This procedure requires the following tools: • Jeweler’s #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Preliminary Steps Before you begin, remove the top housing and the internal frame. Part Location
106 - Mac mini Take Apart Logic Board Removal Procedure 1. Using a jeweler’s #0 Phillips screwdriver, remove the logic board screw. Note: The logic board screw and the internal frame screws look similar; however, the logic board screw is shorter than the screws used for the internal frame. 2. Disconnect the power-on cable from the connector on the logic board.
Mac mini Take Apart - 107 Logic Board 3. Using a black stick or other nonconductive tool, disconnect the LED cable from the connector on the logic board. Note: This connector is very small. Don’t pull on the cable; pull on the connector. 4. After disconnecting the LED cable, gently push the LED away from the board to free the logic board from the bottom housing. Note: Don’t bend the LED too much or it could snap off the bottom housing.