Ask Proxima A1100, A1200, A1300 Quick Start Guide

Quick Start Guide
A1100    A1200    A1300
Regulatory models W2100 and W2106 

231
Status Indicator Panel
 
1
2
+-+
Unpack the box
Heres whats included:
Put batteries in the remote
The remote uses 2 AA batteries.
Projector
Computer Cable
Save the box and packing materials.
Please dispose of batteries in an environmentally proper manner.
Remote
Power Cable
The top of your projector includes a
convenient indicator panel with symbols that
light up to show important status.
For details, see Troubleshooting.
Power/StandbyService Required
High TemperatureReplace Lamp
Please read the...

OR
3
Mini-Plug Audio Y-Cable



Connect source
Color-coded connections make it easy.
You can connect more than one source if needed.
Connect to: Computer
Connect to: DVD or VCR* (using optional cables)
Computer Cable (included)
Computer
*Also for game console or cable box.
Connect video using either an S-Video or a Composite Video cable
Connect audio using a Mini-Plug to RCA Audio Y-Cable
1
2
Composite Video Cable
Video Cable
Good
Better
Want better sound?
Connect the sources audio output to a...

4
1    Connect the power cord to the projector
       and to an electrical outlet
3    Turn on the projector
4    Wait for the lamp to warm up
5    Turn on computer or other source
6    Change source if needed
The power light       on the projector will light amber.
Press power (on the projector or remote).
The power light will start blinking green.
After a few seconds, the power light will stop blinking and turn
green. It can take a minute for the lamp to reach full brightness.
If needed, press source...

5
1    Height
2    Keystone
3    Zoom and focus
1 Hold down the release button 
under the front of the projector.
2  Lift the front of the projector to 
the desired height.
3  Release the button.
Press the keystone buttons to
make the picture square.
Adjust zoom first, then focus the
center of the image.
To flip the image, turn on the Ceiling 
Mount setting in the Setup menu.
Ceiling mount?
Adjust the picture
Projector Location
As distance increases, the
image gets larger and
moves upwards.
Diagonal...

6
7
8
Press the power button
1 Press menu, then press      or      to review menus. 
2  Press select to enter a menu, then press      or      to review settings.
3  Press select to change a setting. If this shows more choices, press
       or      to update the setting, then press select or menu to save it.
4  Press menu to go back. Press it again to remove the menu.
Using the menus
Turn off the projector
Register your product
Optional: Read the Reference Guide
Activate your warranty to ensure...

4
Troubleshooting
If there is no picture or the picture is blank
 If the power light is off, make sure the power cord is connected and plugged 
into a live electrical outlet. If the power light is amber and not blinking, press 
the power button. 
 Check video source and cables. Make sure the video source (computer, DVD 
player, VCR, etc.) is turned on and cables are securely connected between the 
source and the projector. 
 Make sure your computers video port is enabled. Press the key combination 
that...

We’re here to support you with your new purchase. We can help you with…
•  Determining screen sizes
•  Documentation in other languages
•  Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)
•  Selecting optional accessories
•  Product warranty protection plans
Hg - Lamp contains mercury. Manage in accordance with local disposal laws.
See www.lamprecycle.org    Declaration of ConformityManufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USAEuropean Office:...