Asus A3000n Service Guide

DISASSEMBLY PROCEDURE 
3 - 1 
Chapter 
3 
Disassembly Procedure 
Please follow the information provided in this section to perform 
the complete disassembly procedure of  the notebook.  Be sure to 
use proper tools described before. 
SUS A3000N Series Notebook consists of various modules.  This chapter 
describes the procedures for the complete notebook disassembly.  In 
addition, in between procedures, the detailed disassembly procedure of 
individual modules will be provided for your service needs....

DISASSEMBLY PROCEDURE 
 3 - 2 
Batter y module 
The illustration below shows how to remove the battery module.  
 
Removing Battery Module 
 
1.  Turn over the notebook. 
 
 
 
2.  Slide the battery latch (No.1) to unlock. 
 
 
 
3.  Firmly slide the other latch (No.2) to the top and remove the battery. 
 
 
 
BATTERY 
 
1 
2 
BATTERY 
MODULE 
REMOVAL 
  

DISASSEMBLY PROCEDURE 
 3 - 3 
HDD Module 
The illustrations below show how to remove the HDD module from the notebook.   
 
Removing HDD Module 
1.  Release 1 screw (No.1) [M2*4L, (K) B-NI, NY]] from the HDD cover. 
 
 
 
2.  Lift the HDD cover away. 
 
3.  Pull out the hard drive and lift the hard drive away by 2 hands. 
 
 
HDD MODULE 
REMOVAL 
 
HDD MODULE 
 
1  

DISASSEMBLY PROCEDURE 
 3 - 4 
 
Disassembling HDD Module 
Remove 2 screws here (No.2, No.3) [M3 * 3L (K) B-NI] and 2 screws (No.4, No.5) 
[M3 * 3 L (K) B-NI] on the other side to separate HDD from HDD housing. 
 
 
 
 
 
*Please do not touch inside of the HDD module. 
HDD MODULE 
DISASSEMBLY
 
4 
5 
3  2  

DISASSEMBLY PROCEDURE 
 3 - 5 
Memor y Module 
The A3000N Series Notebook comes standard with one SO-DIMM in SO-DIMM 
socket.  There is another expansion SO-DIMM socket for you to upgrade the total 
memory up to 1024MB with two 512MB SO-DIMM. 
 
Removing Memory module  
1.  Remove 2 screws on DDR Door (No.1, No.2) [M2*3L(K, D3.4) W-NI NY] 
 
 
 
2.  Lift the DDR Door away 
 
3.  Open the 2 latches aside (No. 3, 4), which will pop the memory module up to an 
angle of 30°, then pull out the memory module...

DISASSEMBLY PROCEDURE 
 3 - 6 
 
Wireless LAN Module 
The illustration below shows how to remove the Wireless LAN module.  
 
Removing Wireless LAN module 
1.  Remove 2 Antenna cables from Wireless LAN Module. (No.1, No.2) 
(White cable: AUX, Black cable: MAIN) 
 
 
 
2.  Remove the Wireless LAN module by opening the 2 latches aside, which will pop 
the module up to an angle of 30°, then pull out the module in that angle just like 
memory module. 
 
 
 
 
WIRELESS 
LAN 
2  1 
30o 
WIRELESS 
LAN 
REMOVAL  

DISASSEMBLY PROCEDURE 
 3 - 7 
CPU Module 
The illustrations below show how to remove the CPU module from the notebook. 
 
Removing CPU 
1.  Remove 2 screws on the Thermal Door, (No.1, No.2) [M2*4L, (K) B-NI, NY]. 
 
 
2.  Lift the Thermal Door away. 
 
 
CPU 
REMOVAL 
CPU 
 
2 
1  

DISASSEMBLY PROCEDURE 
 3 - 8 
 
3.  Disconnect the cable on CPU module. 
 
 
 
4.  Remove the 2 screws aside the CPU fan (No.3, No.4) [M2 * 6L (K, D4.6) (K) B-
NI, NY]. 
 
 
 
5.  Lift the CPU FAN module away.  
3 
4  

DISASSEMBLY PROCEDURE 
 3 - 9 
 
6.  Remove the 4 screws upon the CPU module (No.5 ~No.8) [M2 * 6L (K, D4.6) 
(K) B-NI, NY]. 
 
 
 
7.  Take away the CPU heat sink module gently. 
 
 
 
6 
8 
5  7  

DISASSEMBLY PROCEDURE 
 3 - 10 
8.  Turn the non-removable screw here 180 degrees counter-clockwise to loosen the 
CPU.  
 
 
 
 
 
 
 
 
 
 
 
9.  Squeeze the vacuum handling pump and use it to lift the CPU away.  
 
 
 
* Don’t touch the die above the CPU. 
Unlock 
L 
 
 
O