Asus Ls201d Quick Start Guide

							
English
	
 
LS201 Series
LCD Monitor
 
Quick Start Guide
 
						

							
Quick	Start	Guide
English

Safety information
•	 Before	setting	up	the	 monitor,	 carefully	 read	all	the	 documentation 	that	 came	
with	the	package.			
•	 To	prevent	fire	or	shock	hazard,	never	expose	the	monitor	to	rain	or	 moisture.		
•	 The	 monitor	should	be	operated	 only	from	 the	type	 of	power	 source	 indicated	
on	 the	 label.	 If	you	 are	not	sure	 of	the	 type	 of	power	 supplied	 to	your	 home,	
consult	your	dealer	or	local	power	company.	
•	 Use 	the 	appropriate 	power 	plug 	which 	complies 	with 	your 	local 	power 	standard.
•	 To 	ensure 	satisfactory 	operation, 	use 	the 	monitor 	only 	with 	UL 	listed 		computers	
which	have	appropriate	configured	receptacles	marked	between	100-240V	 AC.		
•	 If 	you 	encounter 	technical 	problems 	with 	the 	monitor, 	contact 	a 	qualified 	service	
technician	or	your	retailer.			
Monitor introduction
Front view        Rear view 
1.	SPLENDID™	mode	hotkey
2.	Decrease	button
3.	MENU	button
4.	Increase	button/Brightness	hotkey
5.	Power	button	6.	VGA	port
7.	DVI	port
8.	DC-IN	port	
Stand
Light In Motion
1123444445
678
 
						

							
																																Quick	Start	Guide
English

2.1 Unfolding the monitor
The	monitor	 is	folded	 in	the	 package.	 To	unfold	 the	monitor,	 hold	the	back	 cover	
and	 press	 the	Button	 with	one	hand,	 and	carefully	 tilt	the	 monitor	 forward	with	the	
other	hand	until	the	Button	rebounds	with	a	click.
Button
	-5º~20º
2.2  Connecting the cables
1.	 Connect	the	cables	as	the	following	instructions:
•	 To	connect	 the	power	 adapter:	 first,	connect	 the	adapter	 cord	securely	 to	the	
monitor’s	 DC-in	port.	Then,	 connect	 the	power	 plug	to	the	 adapter	 port	with	 the	
other	end	to	a	power	outlet.
•	 To	connect	the	VGA/DVI	cable:	
	 a.	 Plug	the	VGA/DVI	connector	to	the	LCD	monitor’s	VGA/DVI	port.	
	
b.	 Connect	the	other	end	of	the	VGA/	DVI	cable	to	your	computer’s	VGA/	
	 DVI	port.
	
c.	 Tighten	the	two	screws	to	secure	the	VGA/DVI	connector.
2.3  Turning the monitor on
Gently	press	the	power	button		.	See	page	1-2	for	the	location	of	the	power	
buton.	 The	power	indicator	
	lights	up	in	blue	to	show	that	the	monitor	is	ON.
 
						

							
4Quick	Start	Guide
English
2.3 Adjusting the monitor
•	 For	optimal	viewing,	we	recommend	that	you	look	at	the	full	face	of	the	
monitor,	then	adjust	the	monitor	to	the	angle	that	is	most	comfortable	for 	you.
•	 Hold	the	stand	to	prevent	the	monitor	from	falling	when	you	change	 its	angle.
•	 You	can	adjust	the	monitor’s	angle	from	-5º	to	20º.
It	is	normal	that	the	monitor	slightly	shakes	while	you	adjust	the	the	viewing	
angle.	
	-5º~20º
2.4  Installing the monitor to a VESA wall  
  mount
The	foldable	stand	of	the	LS201	LCD	monitor	is	specially	designed	for	a 	VESA	wall	
mount.	
To	install	the	monitor	to	a	VESA 	wall	mount:	
1.	 Have	the	front	of	the	monitor	face	down	on	a	table.
2.	 Press	down	the	button	on	the	arm	and	fold	the	stand	toward	the	back	of	the	 monitor	until	the	button	rebounds	with	a	click.	
3.	 Fix	the	monitor	on	the	VESA 	wall	mount	using	a	screw	driver	to	fasten	four	
screws	into	the	four	screw	holes	on	the	monitor	stand.
We	recommend	that	you	cover	the	table	surface	with	soft	cloth	to	prevent	
damage	to	the	monitor.
ButtonScrew holes
VESA wall mount