Asus Memo Pad User Manual

							
K00B11

Chapter 1:
Hardware Setup
Chapter 1:  Hardware Setup 
						

							
MeMO Pad E-Manual
1

Touch screen panel
The touch screen panel allows you to operate your MeMO Pad using the 
stylus or touch gestures.
Front camera
This built-in front camera allows you to take pictures or record videos 
using your MeMO Pad.
Getting to know your MeMO Pad
Front view 
						

							
K00B1

Rear view
Audio speaker
The built-in audio speaker allows you to hear audios straight from your 
MeMO Pad. Audio features are software controlled.
Volume button
The volume button allows you to increase or decrease the volume level of 
your MeMO Pad.  
						

							
MeMO Pad E-Manual
1

Power button
Press the power button for about two (2) seconds to turn your MeMO Pad 
on or wake it up from standby mode.
To turn your MeMO Pad off, press the power button for about (2) seconds and when prompted, tap Power Off then tap OK.
To lock your MeMO Pad or put it to standby mode, press and quickly release the power button.
In the event that your MeMO Pad becomes unresponsive, press and hold the power button for about eight (8) seconds to force it to shut down.
IMPORTANT!  
• When your MeMO Pad is inactive for fifteen (15) seconds, it will 
automatically go to standby mode.
•  Forcing the system to restart may result to data loss. We strongly 
recommend that you back up your data regularly.
Speaker/Headset port
This port allows you to connect your MeMO Pad to amplified speakers or a 
headset.
IMPORTANT!  This port does not support an external microphone.
Microphone
The built-in microphone can be used for video conferencing, voice 
narrations or simple audio recordings.
Micro USB 2.0 port
Use the micro USB (Universal Serial Bus) 2.0 to charge the battery pack or 
supply power to your MeMO Pad. This port also allows you to transfer data 
from your computer to your MeMO Pad and vice versa.
NOTE:  When you connect your MeMO Pad to the USB port on your 
computer, your MeMO Pad will be charged only when it is in sleep mode 
(screen off ) or turned off. 
						

							
K00B1

Rear camera
This built-in rear camera allows you to take high-definition pictures or 
record high-definition videos using your MeMO Pad.
MicroSD card slot
The MeMO Pad comes with a built-in memory card reader slot that 
supports microSD and microSDHC card formats. 
						

							
MeMO Pad E-Manual
1 
						

							
K00B1

Chapter 2: 
Using your MeMO Pad
Chapter 2:
Using your MeMO Pad 
						

							
MeMO Pad E-Manual
1

Setting up your MeMO Pad
Charging your MeMO Pad
Charge your MeMO Pad for eight (8) hours before using it in battery mode for the first time.
Connect the micro USB cable to the power adapter.
Plug the micro USB connector into your MeMO Pad.
Plug the power adapter into a grounded power outlet.
To charge your MeMO Pad: 
						

							
K00B1

NOTES:
•  Your MeMO Pad can be charged via the USB port on a computer only when it is in 
sleep mode (screen off ) or turned off.
•  Charging through a USB port of a computer may take longer time to complete.
•  If your computer does not provide enough power for charging your MeMO Pad, 
charge your MeMO Pad via the grounded power outlet instead.
IMPORTANT!
•  Use only the bundled power adapter and micro USB cable to charge your MeMO 
Pad. Using a different power adapter may damage your MeMO Pad.
•  Peel the protective film off from the power adapter and micro USB cable before 
charging the MeMO Pad to prevent risk or injury. 
•  Ensure that you plug the power adapter to the correct power outlet with the 
correct input rating. The output voltage of this adapter is DC 5.2V, 1.35A.
•  Do not leave the MeMO Pad connected to the power supply once it is fully 
charged. MeMO Pad is not designed to be left connected to the power supply for 
extended periods of time.
•  When using your MeMO Pad while plugged-in to a power outlet, the grounded 
power outlet must be near the unit and easily accessible. 
						

							
MeMO Pad E-Manual
0

Turning your MeMO Pad on
To turn your MeMO Pad on, press the power button for about two (2) seconds.