Asus Mm17tg Users Manual

							 
10
OSD MENU TABLE
 
The table describes the function of each OSD icon  Main Menu Item  Main 
Menu  Icon   Sub 
Menu  Item  Sub 
Menu  Icon   Description 
Scenery 
Mode    Advance for scenery use with 
SPLENDID
 Video Enhancement   
Standard 
Mode    Advance for general Windows use 
(SPLENDID
 Off)  Theater 
Mode    Advance for movie use with 
SPLENDID
 Video Enhancement   
Game 
Mode    Advance for game use with 
SPLENDID
 Video Enhancement   Scenario 
   
Night 
Mode    Advance for dark-display use with 
SPLENDID
 Video Enhancement   
Color  R  
  Adjust red gain  
 
Color G 
  Adjust green 
gain  
 RGB 
 
Color  B  
  Adjust blue gain  
Reddish 
  Select reddish 
skin stone 
Natural 
  Select natural 
skin stone Skin 
Tone   
Yellowish 
  Select yellowish 
skin stone 
Cool 
  The image 
appears bluer. 
(9300
 K)  Normal 
  Normal image 
color. (7500
 K)  Color Adjust    
Color 
Temp   
Warm 
  The image 
appears redder. 
(6500
 K)  Brightnes
s    Adjust brightness level 
Luminance    
Contrast  
  Adjust contrast level 
OSD Setup  
  OSD H-
Position  
  Adjust horizontal position of the 
OSD  
						

							 
11
OSD V-
Position  
  Adjust vertical position of the OSD   
OSD 
Timeout  
  Adjust OSD timeout 
Phase 
  Adjust image 
Phase to reduce 
Horizontal-line 
noise of the 
image Focus  
 
Clock 
  Adjust image 
Clock to reduce 
Vertical-line 
noise of the 
image 
H-Position  
  Adjust  horizontal 
position of the 
image Image 
Position  
 
V-Position  
  Adjust vertical 
position of the 
image Image Setup    
Auto 
  Automatically adjust the horizontal 
/vertical positions, phase and clock 
of the image 
Input Select  
  Select an input signal from analog/digital source 
(MM17T only) 
Information  
  Show the resolution,H/V frequency and input port of 
current input timing 
Language  
  Select the desired language  
Reset 
  Recall default setting 
Exit 
  Exit OSD 
 
NOTES 
 
·
 
PHASE adjusts the phase of the pixel clock signal. With a wrong phase adjustment the 
screen shows horizontal disturbances. 
 
·  
CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. 
If the frequency is not correct, the screen shows vertical stripes and the image has no correct 
width. 
 
 
 
 
 
  
						

							 
12
PLUG AND PLAY 
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC 
STANDARD. It allows the monitor to inform the host system of its identity and, depending on 
the level of DDC used, communicate additional information about its disp\
lay capabilities. 
The DDC2B is a bidirectional data channel based on the I
$C protocol. The host can request 
EDID information over the DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO 
INPUT SIGNAL. TO OPERATE PROPERLY, THERE MUST BE  VIDEO INPUT SIGNAL. 
 
This monitor meets the Green monitor standards as set by the Video Electronics Standards 
Association (VESA) and/or the United States Environmental Protection Agency (EPA) and 
The Swedish Confederation Employees (NUTEK). This feature is designed to conserve 
electrical energy by reducing power consumption when there is no video-input signal present. 
When there is no video input signal this monitor, following a time-out period, will automatically 
switch to an OFF mode. This reduces the monitors internal power supply consumption. After 
the video input signal is restored, full power is restored and the display is automatically 
redrawn. The appearance is similar to a Screen Saver feature except the display is 
completely off. The display is restored by pressing a key on the keyboard, or clicking the 
mouse.  
 
USING THE RIGHT POWER CORD : 
 
The accessory power cord for the Northern American region is the wallet plug with NEMA 5-
15 style and is UL listed and CSA labeled. The voltage rating for the power cord shall be 125 
volts AC. 
Supplied with units are intended for connection to power outlet of personal computer: Please 
use a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three conductors 
flexible cord. One end terminates with a grounding type attachment plug, rated 10A, 250V, 
CEE-22 male configuration. The other end terminates with a molded-on type connector body, 
rated 10A, 250V, having standard CEE-22  female configuration. 
Please note that power supply cord needs to use VDE 0602, 0625, 0821 approval power cord 
in European counties. 
  
						

							 
13
TROUBLESHOOTING (FAQ) 
 
Problem & Question Possible Solution  Power LED is not ON 
l Press the Power Button to check if the 
monitor is in the ON mode. 
l  Check if the Power Cord is properly 
connected the monitor and the power 
outlet.  The Power LED lights 
amber and there is no 
screen image 
l 
Check if the monitor and the computer are 
in the ON mode. 
l  Make sure the Signal Cable is properly 
connected the monitor and the computer. 
l  Inspect the Signal Cable and make sure 
none of the pins are bent. 
l  Connect the computer and another 
available monitor to check if the computer 
is properly working.  Screen image is too light or 
dark 
l 
Adjust the Contrast and Brightness 
settings via OSD.  Screen image is not 
centered or sized properly 
l 
Press the SPLENDID  Button for 2 
seconds to automatically adjust the 
image. 
l  Adjust the H-Position or V-Position 
settings via OSD  Screen image bounces or 
a wave pattern is present 
in the image 
l 
Make sure the Signal Cable is properly 
connected the monitor and the computer. 
l  Move electrical devices that may cause 
electrical interference.  Screen image has color 
defects 
(white does not look white)
  l 
Inspect the Signal Cable and make sure 
that none of the pins are  bent. 
l  Perform Reset via OSD. 
l  Adjust the R/G/B color settings or select 
the Color Temperature via OSD.  Screen image is blurry or 
fuzzy 
l 
Press the SPLENDID  Button for 2 
seconds to automatically adjust the 
image. 
l  Adjust the Phase and Clock settings via 
OSD.  No sound or sound is low 
(MM17T only). 
l 
Ensure that the Audio Cable is properly 
connected the monitor and the computer  
l  Adjust the volume settings of both your 
monitor and computer.  
l  Ensure the computer sound card driver is 
properly installed and activated.  
						

							 
14
ERROR  MESSAGE & POSSIBLE  SOLUTION
 
 
NO SIGNAL   
 
1. Check that the signal-cable is properly connected , If the connector is loose,  tighten the  connector  s screws. 
2. Check the signal-cable  s connection pins for damage. 
 
 
 
OUT OF RANGE   
 
Your computer has been set to unsuitable display mode ,set the computer to display mode  given in the following Preset Timing Table.    
						

							 
15
APPENDIX 
 
 
 
SPECIFICATIONS 
 
Model MM17T MM17D  Visible Diagonals 
17.0 (43.2cm) Screen Size 
Horizontal : 337.92mm, Vertical : 270.34mm  
Max. Resolution 
SXGA 1280x1024@75Hz Pixel Pitch 
0.264mm Brightness 
300cd/
  (Typ.), 400cd/   (Max.)  Contrast Ratio 
500:1 (Typ.), 600:1 (Max.) Viewing Angle (CR
 10)  
150
%(H)/ 130 %(V)  Display Colors 
16.2M Response Time 
8ms Signal Frequency 
Horizontal: 30~80 kHz, Vertical: 55 ~ 75Hz Max. Pixel Clock 
135MHz Plug & Play 
VESA DDC2BTM
  
  Video Input 
DVI-D & D_Sub D_Sub Audio Input/ Earphone 
3.5mm Mini-jack -- Speaker (Built-in) 
1.2W x 2 Stereo -- Tilt 
+20%~ -5 %  VESA Wall Mount 
100x100mm Power Source 
100~240VAC,47~63Hz Power Consumption 
Power On: 
						

							 
16
PRESET TIMING TABLE
 
 
STANDARD    
RESOLUTION   HORIZONTAL 
FREQUENCY  VERTICAL 
FREQUENCY  Dos-mode 
640 & 350 31.47kHz 70Hz  Dos-mode 
720 & 400  31.47kHz 70Hz  640 
& 480 31.47kHz 60Hz  640 
& 480 35.00kHz 66.6Hz  640 
& 480 37.50kHz 75Hz  VGA 
640 & 480 37.86kHz 72Hz  800 
& 600 37.879kHz 60Hz  800 
& 600 46.875kHz 75Hz  800 
& 600 35.16kHz 56Hz  800 
& 600 48.01kHz 72Hz  SVGA 
832 & 624 49.725kHz 75Hz  1024 
& 768 48.363kHz 60Hz  1024 
& 768 56.476kHz 70Hz  XGA 
1024 & 768 60.02kHz 75Hz  1280 
& 1024 64.00kHz 60Hz  SXGA 
1280 & 1024 80.00kHz 75Hz  
						

							 
17
CONNECTOR PIN ASSIGNMENT
 
  15
6
10
1115
 
 
15 - Pin Color Display Signal Cable 
 
PIN NO.     
DESCRIPTION   
PIN NO.   
DESCRIPTION  1. Red   9. +5V 
2. Green 10. Detect Cable 
3. Blue 11. RXD 
4. TXD 12. DDC-Serial Data 
5. Ground 13. H-Sync 
6. R-Ground 14. V-Sync 
7. G-Ground 15. DDC-Serial Clock 
8. B-Ground   
 
 
   
24 - Pin Color Display Signal Cable(MM17T only) 
 
PIN NO.     
DESCRIPTION   
PI N NO.    
DESCRIPTION  1. TMDS Data 2- 13. TMDS Data 3+ 
2. TMDS Data 2+ 14. +5V Power 
3. TMDS Data 2/4 
Shield  15. Ground(for+5V) 4. TMDS Data 4- 16. Hot Plug Detect 
5. TMDS Data 4+ 17. TMDS Data 0- 
6. DDC Clock 18. TMDS Data 0+ 
7. DDC Data 19. TMDS Data 0/5 
Shield 8. N.C. 20. TMDS Data 5- 
  9. TMDS Data 1- 21. TMDS Data 5+ 
10. TMDS Data 1+ 22. TMDS Clock Shield  
11. TMDS Data 1/3 
Shield  23. TMDS Clock + 12. TMDS Data 3- 24. TMDS Clock -