Asus Ms226h User Guide

  
LCD Monitor
User Guide
      October  2009 
E5195   V1
MS226H/MS227N Series
 

ii

Copyright © 2009 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any langua\
ge in any form or by any means, except documentation kept by the purchaser for backup purposes, without \
the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired,...

iii
 

Notices
Federal. Communications . Commission . Statement
This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the 
following two conditions:
•  This device may not cause harmful interference, and
•  This  device  must  accept  any  interference  received  including  interference  that 
may cause undesired operation.
T h i s  e q u i p m e n t  h a s  b e e n  t e s t e d  a n d  f o u n d  t o  c o m p l y  w i t h  t h e  l i m i t s  f o r  a 
Class  B...

iv

Safety information
•  Before  setting  up  the  monitor,  carefully  read  all  the  documentation  that  came 
with the package.   
•  To prevent fire or shock hazard, never expose the monitor to rain or moisture.  
•  Never try to open the monitor cabinet. The dangerous high voltages inside the 
monitor may result in serious physical injury. 
•  If the power supply is broken, do not try to fix it by yourself. Contact a qualified 
service technician or your retailer.  
•  Before using the product,...

v
 

Care & Cleaning 
•  Before  you  lift  or  reposition  your  monitor,  it  is  better  to  disconnect  the  cables 
and  power  cord.  Follow  the  correct  lifting  techniques  when  positioning  the 
monitor.  When  lifting  or  carrying  the  monitor,  grasp  the  edges  of  the  monitor. 
Do not lift the display by the stand or the cord. 
•  Cleaning. Turn  your  monitor  off  and  unplug  the  power  cord.  Clean  the  monitor 
surface  with  a  lint-free,  non-abrasive  cloth.  Stubborn...

vi
 
Where to find more information
Refer  to  the  following  sources  for  additional  information  and  for  product  and 
software updates.
1.. ASUS . websites
T h e  A S U S  w e b s i t e s  w o r l d w i d e  p r o v i d e  u p d a t e d  i n f o r m a t i o n  o n  A S U S 
hardware and software products. Refer to http://www.asus.com
2.. Optional . documentation
Your product package may include optional documentation, such as warranty 
card,  that  may  have  been  added  by  your  dealer....

1-1
1.1 Welcome!
Thank you for purchasing the  ASUS  MS226H/MS227N Series LCD monitor!®  
The latest widescreen LCD monitor from  ASUS provides a crisper, broader, and 
brighter display , plus a host of features that enhance your viewing exper ience.  
With these features, you can enjoy the convenience and delightful visua l 
1.2 Package contents
If  any  o f  th e above  it ems  is  damaged  o r  missing,  cont act  your  ret ailer 
immediately .
experience that the MS226H/MS227N Series brings you!...

1-Chapter 1: Product introduction
1.3	 Assembling	 the 	 monitor 	 base
To assemble the monitor base:
Attach the base to the monitor with bundled handy-screw correctly and th\
en put on the 
screw cover.
We  recommend  that  you  cover  the  table  surface  with  soft  cloth  to  prevent 
damage to the monitor. 
 

1.4  Connect cables 
Connect cables which you needMS226H/MS227N
1-3
	
ASUS LCD Monitor  MS226H/MS227N Series
1
2
3
4
Power adapter
 VGA cable
 HDMI to DVI cable (For MS226H) or DVI cable (For MS227N)
Audio cable (For connecting a speaker to play MS226H HDMI audio)
 

1.  button:
 • Automatically adjust the image to its optimized position, clock, and phase  
 by long pressing this button for -4 seconds (for VGA mode only).
 • Use this hotkey to switch from five video preset modes (Game    
 Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode)  
 with SPLENDID™ Video Intelligence Technology. 
• Exit the OSD menu or go back to the previous menu as the OSD   menu is active.
. 
 
3. MENU Button:  
• Press this button to enter/select the icon...