Asus Router DSL-N13 User Manual Czech Version

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual


Quick	setup
Log onto the DSL-N13 configuration page
1.  Type 12.168.1.1 into the address box of your Web browser and press Enter.
2.   A  login  window  appears  for  user  name  and  password.  The  default  username  is 
admin, password is admin (in lower case).
3.  After logging in, you can see the DSL-N13 configuration page.
ADSL 	setup
1.  By default, the Quick 	Setup page pops up. The Quick Setup Wizard automatically 
detects your...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
10

-- If your connection type is MER (DHCP)
Click Next if your connection type is MER (DHCP). 
If  your  actual  connection  is  not  MER(DHCP),  click Manual 	Setting  to 
manually set up DSL-N13. Refer to Page 11-13 for manual setting instruction.
Wireless	setup
1.   Choose a Security 	Level. For detailed security information, refer to Page 21-22.
2.   Input a key in the Key field. The number of digit for the key depends on the security 
level you...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
11

Manual	Setup
If  you  encounter  difficulty  when  configuring  your  ADSL  connection  with  Quick  Setup, 
click Manual 	Setting 	to manually set up your DSL-N13.
ADSL	Setup
1.  Select your Country and ISP and click Next. 
2.  If your country and ISP are not on the list, select	Not 	list, key in your VPI and VCI  
values and click Next. You may ask your ISP for VPI/VCI values. 

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
12

3.  Select  your  connection  type  and  click Next. You  can  get  the  connection  type  from 
your ISP.
--	If 	your 	connection 	type 	is 	PPPoA 	or 	PPPoE
For dynamic	 IP users, input your PPP user name, password, and service name 
then click Next.
For static	IP users, check Use	Static	 IP	Address then key in your IP address, 
then click Next. 

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
13

--	If 	your 	connection 	type 	is 	MER
For dynamic 	IP  users,  check Obtain 	an 	IP 	address 	automatically, Obtain	
default 	gateway 	automatically, and Obtain 	DNS 	server 	address 	automatically, 
then click Next.
For static	 IP  users,  check Use	the	following	 IP	Address, Use	 the	following	
default	 gateway, and Use	the	following	 DNS	server	 address, then input the 
addresses in correspondent fields.
--	If 	your 	connection 	type 	is 	IPoA...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
14

Wireless	Setup
1.  Designate  an  SSID  (network  name)  for  DSL-N13.  Choose  the  security  level  then 
input  a  key.  The  number  of  digit  of  your  key  depends  on  the  security  level  you 
choose. Refer to the note on the web page. When finished, click Next.
2.  This  page  provides  a  summary  of  DSL-N13  WAN  and  wirelss  configuration.  Click  
Save/Reboot 	to save and activate your configuration.
3.  Setup complete! DSL-N13...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
15

EZSetup
ASUS  DSL-N13  Wireless  ADSL2/2+  Modem  Router  provides  an  easy-to-use  setup 
utility -- EZSetup. With this utility, you can setup your Internet connection, wireless LAN 
with just several clicks. 
Installing	 ASUS	utility
To  use ASUS  EZSetup  for  DSL-N13  configuration,  you  must  install  the ASUS  utilities 
from the support CD included in your package. Insert the CD into your optical drive and 
autorun  the  installation...

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
16

EZSetup
3.  Push the red EZSetup button on the rear panel of DSL-N13 for over 3 seconds until 
the PWR LED is blinking. 
5.  The  system  generates  the  SSID  and  Network  key  automatically.  The  network  key 
is  a  128-bit  WEP  key  by  default. You  can  accept  the  settings,  or  assign  SSID  and 
keys to your own need. Click Next to save the wireless settings.
4.  Click EZSetup button. 

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
17

6.  Next,  EZSetup  will  guide  you  to  complete  the  Internet  connection  settings.  Check  
Configure ISP settings then click Next to continue.
7.  The  system  detects  your  Internet  connection  type. The  progress  may  take  several 
seconds.
If your ADSL connection is successfully detected by DSL-N13, skip to Step 
8. If your ADSL connection can not be detected, you need follow Step 8 and 
manually set up your ADSL connection.
8....

DSL-N13	Wireless	ADSL	2/2+	Modem	Router	User	Manual
18

If your country or ISP are not on the list, select Not	listed for both country and 
ISP  fields.  Then  select Connection	 type  and  fill  in  VPI  and  VCI.  You  can  get 
VPI/VCI values from your ISP. 
9.  Input your ISP account User name and Password then click Next.
10.  Setup complete! This page shows the wireless network setting parameters. You can 
either save it or print it out for future reference. Click Finish to quit EZSetup.