ASUS Transformer Book Flip TP500LA User Manual

							81
I/O Interface SecurityIn the Security menu, you can access I/O Interface Security to lock or unlock some interface functions of your Notebook PC.
I/O Interface Security
LAN Network Interface             [UnLock]Wireless Network Interface        [UnLock]HD AUDIO Interface                [UnLock]USB Interface Security
If Locked, LAN controller will be disabled.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Security
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
LAN Network InterfaceLockUnLock
To lock an interface:
1. On the Security screen, select I/O Interface Security.
2. Select an interface you would like to lock then press 
.
3. Select Lock.
Notebook PC E-Manual   
						

							82
USB Interface SecurityThrough the I/O Interface Security menu, you can also access USB Interface Security to lock or unlock ports and devices.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
USB Interface Security
USB Interface                  [UnLock]
External Ports                 [UnLock]CMOS Camera                    [UnLock]Card Reader                    [UnLock] 
If Locked, all USB device will be disabled
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Security
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
USB InterfaceLockUnLock
To lock the USB interface:
1. On the Security screen, select I/O Interface Security > USB Interface Security.
2. Select an interface that you would like to lock then select Lock.
NOTE: Setting the USB Interface to Lock also locks and hides the External Ports and other devices included under USB Interface Security.
Notebook PC E-Manual  
						

							83
Set Master PasswordIn the Security menu, you can use Set Master Password to set up a password-enabled access to your hard disk drive. 
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Set HDD Master Password.***Advisable to Power Cycle System after Setting Hard Disk Passwords***
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main   Advanced   Boot  Security   Save & Exit
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Password DescriptionIf ONLY the Administrator’s password is set,then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights. 
Administrator Password Status  NOT INSTALLEDUser Password Status           NOT INSTALLEDAdministrator PasswordUser PasswordHDD Password Status :          NOT INSTALLEDSet Master PasswordSet User PasswordI/O Interface Security
To set the HDD password:
1. On the Security screen, select Set Master Password.
2. Type in a password then press .
3. Re-type to confirm the password then press .
4. Select Set User Password then repeat the previous steps to set up the user password.
Notebook PC E-Manual   
						

							84
Save & Exit
To keep your configuration settings, select Save Changes and Exit before exiting the BIOS. 
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main   Advanced   Boot   Security  Save & Exit
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Save Changes and ExitDiscard Changes and Exit
Save OptionsSave ChangesDiscard Changes
Restore Defaults
Boot OverrideWindows Boot Manager  
Launch EFI Shell from filesystem device
Exit system setup after saving the changes.
Notebook PC E-Manual  
						

							85
To update the BIOS:
1. Verify the Notebook PC’s exact model then download the latest BIOS file for your model from the ASUS website.
2. Save a copy of the downloaded BIOS file to a flash disk drive.
3. Connect your flash disk drive to your Notebook PC.
4. Restart your Notebook PC then press  during POST.
5. From the BIOS menu, Select Advanced > Start Easy Flash, then 
press .
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Start Easy FlashInternal Pointing Device              [Enabled]Wake on Lid Open                      [Enabled]Power Off Energy Saving               [Enabled]SATA ConfigurationGraphics ConfigurationIntel (R) Anti-Theft Technology CorporationUSB ConfigurationNetwork Stack
Press Enter to run the utility to select and update BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main  Advanced   Boot   Security   Save & Exit
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual   
						

							86
FSOFS1FS2FS3FS4
0 EFI 
ASUSTek Easy Flash Utility
[←→]: Switch [↑↓]: Choose [q]: Exit [Enter]: Enter/Execute
Current BIOSPlatform: TP500Version: 101Build Date: Oct 26 2012Build Time: 11:51:05
New BIOSPlatform: UnknownVersion: UnknownBuild Date: UnknownBuild Time: Unknown
FLASH TYPE: MXIC 25L Series
6. Locate your downloaded BIOS file in the flash disk drive then 
press . 
7. After the BIOS update process, select Exit > Restore Defaults to restore the system to its default settings. 
Notebook PC E-Manual  
						

							87
Troubleshoot
By pressing  during POST, you can access Windows® 8.1 
troubleshoot options which includes the following:
•	 Refresh	your	PC
•	 Reset	your	PC
•	 Advanced	options
Refresh your PC
Use Refresh your PC if you want to refresh your system without losing your current files and applications. 
To access this during POST:
1. Restart your Notebook PC then press  during 
POST. 
2. Wait for Windows® to load the Choose an option screen then tap/click Troubleshoot.
3. Tap/click Refresh your PC.
4. In the Refresh your PC screen, read the bullet points to learn more about using this option then tap/click Next.
5. Tap/click the account you would like to refresh.
6. Type your account password then tap/click Continue.
7. Tap/click Refresh.
IMPORTANT! Ensure that your Notebook PC is plugged in to a power source before refreshing your system.
Notebook PC E-Manual   
						

							88
Reset your PC
IMPORTANT! Back up all your data before performing this option.
Use Reset your PC to restore your Notebook PC to its default settings. 
To access this during POST:
1. Restart your Notebook PC then press  during 
POST. 
2. Wait for Windows® to load the Choose an option screen then tap/click Troubleshoot.
3. Tap/click Reset your PC.
4. In the Reset your PC screen, read the bullet points to learn more about using this option then tap/click Next.
5. Tap/click your preferred reset option: Just remove my files or Fully clean the drive. 
6.  Tap/click Reset.
IMPORTANT! Ensure that your Notebook PC is plugged in to a power source before resetting your system.
Notebook PC E-Manual  
						

							89
Advanced options
Use Advanced options to perform additional troubleshooting options in your Notebook PC.
To access this during POST:
1. Restart your Notebook PC then press  during 
POST. 
2. Wait for Windows® to load the Choose an option screen then tap/click Troubleshoot.
3. Tap/click Advanced options.
4. In the Advanced options screen, select the troubleshooting option you wish to perform.
5. Follow the succeeding steps to complete the process.
Using System Image Recovery
Under Advanced options, you can use System Image Recovery to recover your system using your Notebook PC’s original image file. 
To access this during POST:
1. Restart your Notebook PC then press  during 
POST. 
2. Wait for Windows® to load the Choose an option screen then tap/click Troubleshoot.
3. Tap/click Advanced options.
Notebook PC E-Manual   
						

							90
4. In the Advanced options screen, select System Image Recovery.
5. Choose an account you would like to recover using a system image file.
6. Type your account password then tap/click Continue.
7. Select Use the latest available system image (recommended), then tap/click Next. You can also choose Select a system image if your system image is in an external device or DVD.
8. Follow the succeeding steps to complete the system image recovery procedure.
NOTE: We strongly recommend that you regularly backup your system to prevent data loss in case your Notebook PC stops working.
Notebook PC E-Manual