ATT At32112 Manual

User’s manual
Model: AT3211-2 

1
Tele p ho ne line c or dH an d set s (2)Tele p ho ne ba se
Char g er an d 
c har g er ad apter
B at ter y c o m par t ment c over s (2)
B at ter ies (2)
Tele p ho ne ba s e     
p ower ad apter
Us er ’s manual
Getting startedPart checklist
Your telephone contains the following items.  Save your dales receipt and original packaging in 
the event warranty service is necessary.
Telephone base and charger installation
Install the telephone base and charger as shown below.   The telephone base is designed...

2
 
   
 
Battery indicators Battery status Action
 
Handset layout
Getting startedBattery installation and charging
Install the battery as shown below.  After installing the battery you may be able to make and 
receive short calls.  For best performance, charge the handset for at least 16 hours before use.  
When not in use, place the handset in the telephone base or charger.
1. If the battery compartment cover is on the handset, press the indentation and slide the cover
    to remove.
2. Plug the...

3
FIND HANDSET
Press to page all system handsets.
IN USE 
light
Flas hes w hen there  is an incom ing call, or 
another telephone is  in use  on the same line.
On w hen a system handset is in use.
VOICEMAIL  light
Flas hes w hen you have new voicemail, a service ofered 
by your telephone company.
Getting startedTelephone base layout
Telephone settings
Ringer volumeYou can set the ringer volume or turn the ringer o.
1. Press P L AY/MENU/SELECT to show the menu when the handset is not in
    use.
2. Press...

4
Telephone settings
LCD languageYou can select ENGLISH, FRANÇAIS or ESPAÑOL to be used in all screen 
displays.
1. Press 
P L AY/MENU/SELECT to show the menu when the handset is not in
    use.
2. Press ▲ or ▼ to select >LCD LANGUAGE, then press 
P L AY/MENU/SELECT.
3. Press ▲ or ▼ to scroll through the choices.
4. Press 
P L AY/MENU/SELECT to conrm your selection.
>LCD LANGUAGE
 SET DATE/TIME
LCD LANGUAGE
ENGLISH
Set date/timeIf you subscribe to caller ID service, the day, month and time are set...

5
A single pause is automatically programmed between the access number and \
the password 
when you program your VOICEMAIL button so that your voicemail service will recognize your 
password.  Depending on your voicemail service, you may need to program \
an extra pause 
between the access number and your password.
Telephone settings
Set voicemail
If you subscribe to voicemail service provided by your local telephone company, this feature 
enables you to program your voicemail function codes so you can...

6
If, in the future, your telephone company requires you to dial the area \
code when making a 
local call, or if you move to an area that requires it, delete the home \
area code you have 
already programmed by pressing 
MUTE/REMOVE.  After you have deleted the programmed 
home area code, _ _ _ appears.
Telephone settings
Home area code
If you dial your local calls using only seven digits (area code not required), you can program your 
home area code so that when you receive a call within your local...

7
• You cannot edit a directory entry while on a call.
• You cannot copy a call log entry into the directory while on a call.    
• If you press 
REDIAL/PAUSE while on a call, you can only view the most recent call, and you
  cannot erase the entry.
•  Press and hold OFF/CLEAR to  exit redial, directory or call log when you are on a call.
Chain dialingUse this feature to initiate a dialing sequence from numbers stored in the directory, call log or 
redial while you are on a call.
Chain dialing can be...

8
• Once you press the VOICEMAIL button, MENU/SELECT is disabled and replaced by P L AY.
• Contact your telephone company for more information about voicemail service.
Telephone operation
Dial a redial entry
1. Press REDIAL/PAUSE, then ▲, ▼or REDIAL/PAUSE to browse.  You hear a double beep when it
    reaches the beginning or end of the redial list.
2. Press           /
FLASH or          to dial the number.
Delete from redial
1. Press REDIAL/PAUSE, then ▲, ▼or REDIAL/PAUSE to browse.  
2. Press...

9
• You can cancel the intercom call before it is answered by pressing OFF/CLEAR or INT on your
   originating handset.
• If the other handset does not answer the intercom call within 100 seconds, is in the directory or call
   log, or is out of range, your originating handset screen shows UNABLE TO CALL TRY AGAIN and
   returns to idle mode.
• Press OFF/
CLEAR or MUTE/REMOVE on the other handset to temporarily silence the intercom ringer.
• You can use a maximum of four handsets at a time.  Ehen two...