ATT DEFINITY Communications System Generic 1, Generic 3, System Management Instructions Manual

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
Overview
The terminal used to administer a DEFINITY Communications System is identified in this docu-
ment as the system administration terminal or the terminal.
The terminal supplied with the system must be located within 50 feet of the system cabinet. The
terminal consists of a video display 
and a keyboard that allow a System Manager to communi-
cate with the system. After initialization, the terminal is used to...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
Refer to the following manuals for additional operation information on the 715, 513, 610, 4410, or
4425 terminals:
l AT&T 715 MT Terminal Users Guide and Service Manual, 999-300-760, for the 715 ter-
minal
l AT&T Information Systems 513 Business Communications Terminal (BCT) Users Guide,
999-700-486IS, for the 513 BCT
l AT&T Information Systems 610 Business Communications Terminal (BCT) Users Guide,
999-300-270IS, for the 610 BCT
l AT&T Information Systems 615...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
715 MT Terminal
The 715 MT terminal emulates the AT&T 615 MT Terminal/System 75 Cartridge combination
(513 emulation) when operated in the “BCS” operating mode. The terminal operating mode is set
by selecting the Emulation option of the User Preferences submenu or via an escape
sequence.
Keyboard Overview
The 715 keyboard is equipped with special keys that allow the user to make corrections and do
editing functions. Various function keys perform specific...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
513 BCT Keyboard
The 513 BCT keyboard is equipped with special cursor keys that allow the user to make correc-
tions and perform editing functions. Function keys that allow single keystrokes to do specific
functions are also provided. Each type of key used on the 513 BCT is described in the following
paragraphs.
See Table 2-A for a list of the cursor keys, function keys, and programmable keys and a brief
description.
Cursor Keys
The cursor keys allow the user...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A. Terminal Keys
[F1][F1]
[F2]
For This Function
To cancel a screen form or command
Once the key is pressed, the system
returns the user to the 
enter com-
mand: (tasks request) level. Any data
entered on a screen form prior to press-
ing CANCL (Cancel) or [F1] is ignored.
For the 4410 or 4425, the associated
[F1] screen label (CANCEL) is automati-
cally assigned.
To clear and redraw a screen form
The system redraws the same screen.
For the 4410 or...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A (continued).
Terminal Keys
Terminal Type
51344104425
For This Functionor                or
610*610†
715‡
615 MT*615 MT†
Press Key Below:
To display the next page of a screen formPagePAGE[F7][F7]Used to display the next page of aDown
screen form that has more than one
page. For the 4410 or 4425, the associ-
ated [F7] screen label (NEXT PAGE)
appears when the screen form has more
than one page.
To display the previous page of a...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A (continued)
Terminal Keys
Terminal Type
51344104425
For This Function
oror
610*
610†
715‡
615 MT*615 MT†
Press Key Below:
To display help information for a field or[Help]
[HELP][F5]
[F5]
command
Used to display help information on the
type of data that can be entered into the
field associated with the current cursor
position. The system delays all the
possible entries the user can input for
that field. This key can also be pressed
at the enter...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A (continued).
Terminal Keys
For This Function
To move the cursor to the previous field on a
line
If the cursor is in the first field on a line,
then it moves to the last field of the pre-
vious line. If it is in the first field of the
first line, then it moves to the last field of
the last line.
Press Key Below:
or
[TAB](shift) or
[TAB]
(shift)
To mOVe the cursor to the next Iine
If the cursor is on the last line, it moves
to the first line.
To move...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
TABLE 2-A (continued).
Terminal Keys
*
†
‡
Terminal Type
51344104425
For This Functionor
610*610†
715‡or
615 MT*615 MT†
Press Key Below:
To update the BCMS screen form using[F6][F6][F6][F6]Monitor commands (G1)
Used to obtain immediate update of real
time status reports for agents and splits.
Used only with the BCMS 
monitor bcms
split and monitor bcms system com-
mands.
If a 513 emulation cartridge is used for a 610 or 615 MT, the 610 or 615 MT
Terminal keys...

CHAPTER 2. DEFINITY ADMINISTRATION TERMINALS
NUMERIC LEGENDS ARE LOCATED ONTHE FRONT SURFACES OF THE
MATRIX AT THE BOTTOM OF
THE RIGHT CLUSTER.
FIGURE 2-2. 513 BCT Keyboard Function Keys and Programmable Keys
2-10