ATT Definity G1, G3, System 75, 7410 Plus Voice Terminal Instructions Manual

AT&T
DEFINITY
®Communications System
Generic 1 and generic 3
and System 75
7410 Plus Voice Terminal Users Guide 

NOTICE
While reasonable efforts were made to ensure that the information in this document
was complete and accurate at the time of printing, AT&T can assume no
responsibility for any errors. Changes or corrections to the information contained in
this document may be incorporated into future issues.
TO ORDER COPIES OF THIS DOCUMENT
Contact:AT&T Customer Information Center
2855 North Franklin Road
P.O. Box 19901
Indianapolis, Indiana 46219
1 800 432-6600,
In Canada: 1 800 255-1242
Order:Document No....

Contents
Your 7410 Plus Voice Terminal1
What the Features Do3
How to Use the Features5
Special Instructions5
Conventions6
Troubleshooting6
Quick Reference Lists6
Abbreviated Dialing (AD)7
Automatic Callback9
Bridging10
Call Coverage10
Call Forwarding All Calls11
Call Park11
Call Pickup12
Conference12
Drop13
Hold14
Intercom (Automatic/Dial)14
Last Number Dialed15
Leave Word Calling (LWC)15
Message
16
Priority Calling16
Select Ring (and Ringer Volume)17
Self-Test
17
Send All Calls18
Speaker (and Speaker...

Your 7410 Plus Voice Terminal
The 7410 Plus voice terminal is designed so that you can conveniently use the many
features of the DEFINITY® Communications System Generic 1 and System 75.
Familiarize yourself with your voice terminal, shown in Figure 1 below and explained
on the following page.
HandsetCall appearance/
feature buttons
Speakerphone/
headset adapter jack
(on back of voice
terminal)
Line jack
(on back of voice
terminal)
Select button
Transfer button
Hold button Message light
Conference/Ring...

Line jack
(on back of voice terminal)
Select button
Transfer button
Hold button
Dial pad
Volume control
button
Handset jack
(on back of voice terminal)
Speaker buttonThis jack is used for connecting a line cord to your voice
terminal. This jack is labeled “LINE.”
When used with [ 
Conference/Ring ] you can select a personalized
ring from 8 ringing patterns. When used with [ 
Drop/Test ]
you can test the lights and ringer on your voice terminal.
For transferring a call to another voice terminal.
For...

What the Features Do
Here are brief descriptions of 21 features, including what each one does and how you
might want to use it. You will have the Conference, Drop, Hold, Message, Select
Ring, Self-Test, Speaker, and Transfer features. In addition, you may have many of
the other features listed here; your System Manager can advise you.
Abbreviated Dialing (AD)  Allows you to store selected phone numbers for quick
and easy dialing. Each number can be a complete or partial phone number, an
extension number,...

Drop  Disconnects from a call without requiring you to hang up the handset or press
the switchhook. Can also be used with the Conference feature to disconnect the last
party added. Use whenever you are using the handset and want to continue using it
for another action after ending a call.
Hold  Puts a call on hold until you can return to it. While a call is on hold, you
can place another call, activate another feature, answer a waiting call, or leave your
voice terminal to perform another task. Use when...

How to Use the Features
The procedures that follow give short, step-by-step instructions for using each of the
features. For your convenience, features are listed alphabetically.
Special Instructions
The first time you use these procedures, you will need to customize them for yourself
by following the directions below. Your System Manager can supply the information
required.
lTo the right of each feature name is a box. For each feature that you have,
mark a [ 
4 ] in the blank box as a reminder....

Conventions
The following conventions are used in the procedures:
Gray TypeProcedural steps in gray type are steps that you should
follow if you do not have a button assigned for the
feature.
[ xxxxx ]This box represents a call appearance button, which is
used exclusively for placing or receiving calls. The
button has a red in-use light and a green status light and
is labeled with an extension number (shown as xxxxx).
[ 
Feature ] andEach of these boxes represents a button that has a feature
assigned to...

Abbreviated Dialing (AD)
To program/reprogram1
an AD button
Note: AD buttons must
first be assigned by your
System Manager.
2
3
4
5On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program
Note: Each AD button will hold one complete phone
number or feature code.
Pick up handset[dial tone]
Press [ 
Program ] (if this button has been assigned to
your voice terminal)
or Dial Program code
[dial tone]
Press [
 AD xxxxx ] to be programmed[dial tone]
Dial...