AT&T Z432 User Guide

							Specifications
63
Specifications Note: Talk time and idle time are based on ideal working environments. 
Use of certain phone functions and network conditions can reduce 
battery life and talk/idle time.
Handset Standards
UMTS/HSPA: 850 MHz, 1900 MHz
GSM/EDGE: 850 MHz 1900 MHz
HSDPA: 3.6 MBps
Dimensions 
(H×W×D) 4.48" x 2.38" x 0.44"
Weight 3.24 oz. (with battery)
Display 2.4" 262K TFT color screen
Camera 2.0 megapixels, supports images up to 1600 x 1200 pixels
Video captureUp to 15fps (QVGA)
Extended memory 32 GB microSD card
Battery 900 mAh, Lithium-Ion (Li-Ion)
Features MMS Video and Picture, Email, Calendar, Speakerphone, 
Voice Recorder, Bluetooth
Supported file types Image: GIF, JPEG, PNG, BMP, Animated GIF, WBMP
Video: MP4
Audio: MP3, AMR, WAV, ACC, ACC+, MIDI
Continuous idle time Up to 10 days
Continuous talk timeApproximately 4.5 hours
Charge timeApproximately 2.5 hours 
						

							This mobile phone complies with part 15 of the FCC Rules. Operation is 
subject to the following two conditions: 
  This device may not cause harmful interference, and 
  This device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy, and if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
•   Reorient or relocate the receiving antenna.
•   Increase the separation between the equipment and receiver.
•   Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•   Consult the dealer or an experienced radio/TV technician for help.
•   Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate 
the equipment.
•   The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Compliance
64 FCC Compliance 
						

							Radio Frequency (RF) Energy
This model phone meets the government’s requirements for exposure to  
radio waves.
This phone is designed and manufactured not to exceed the emission 
limits for exposure to radio frequency (RF) energy set by the Federal 
Communications Commission of the U.S. Government:
The exposure standard for wireless mobile phones employs a unit 
of measurement known as the Specific Absorption Rate, or SAR. The 
SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using 
standard operating positions accepted by the FCC with the phone 
transmitting at its highest certified power level in all tested frequency 
bands. Although the SAR is determined at the highest certified power 
level, the actual SAR level of the phone while operating can be well below 
the maximum value. This is because the phone is designed to operate at 
multiple power levels so as to use only the power required to reach the 
network. In general, the closer you are to a wireless base station antenna, 
the lower the power output.
The highest SAR value for the model phone as reported to the FCC when 
tested for use at the head is 1.30 W/kg, and when worn on the body, as 
described in this user guide, is 1.06 W/kg (body-worn measurements differ 
among phone models, depending upon available enhancements and FCC 
requirements).
While there may be differences between the SAR levels of various phones 
and at various positions, they all meet the government requirement.65
Radio Frequency (RF) Energy
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The 
standard incorporates a substantial margin of safety to give additional 
protection to the public and to account for any variations in measurements. 
						

							While there may be differences between the SAR levels of various phones 
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone 
with all reported SAR levels evaluated as in compliance with the FCC RF 
exposure guidelines. SAR information on this model phone is on file with 
the FCC and can be found under the Display Grant section of http://www.
fcc.gov/oet/ea/fccid/ after searching on FCC ID: Q78-Z432.
For body-worn operation, this phone has been tested and meets the FCC 
RF exposure guidelines for use with an accessory that contains no metal 
and positions the handset a minimum of 0.6 inches (1.5 cm) from the 
body. Use of other enhancements may not ensure compliance with FCC 
RF exposure guidelines. If you do not use a body-worn accessory and are 
not holding the phone at the ear, position the handset a minimum of  
0.6 inches (1.5 cm) from your body when the phone is switched on.
66 Radio Frequency (RF) Energy 
						

							Warranty
ZTE offers you a limited warranty that the enclosed subscriber unit 
and its enclosed accessories will be free from defects in material and 
workmanship for a period that expires one year from the date of sale of 
the Product to you, provided that you are the original end user purchaser 
of the Product and provided that your purchase was made from a supplier 
authorized by the Seller. Transfer or resale of a Product will automatically 
terminate warranty coverage with respect to that Product. This limited 
warranty is not transferable to any third party, including but not limited to 
any subsequent purchaser or owner of the Product. This limited warranty 
is applicable only to end users in the United States.
1.    This product or phone is warranted for 12 (twelve) months from date of purchase.
2.   For warranty service information, please call ZTE service number  
(877) 817-1759 (Toll Free). The manufacturer’s website, http://www.
zteusa.com, is also available for assistance.
3.    This warranty only applies if the product has been used in accordance with the manufacturer’s instructions under normal use and with 
reasonable care.
4.  What this warranty does not cover:
 a)   Defects or damages resulting from the misuse of this product.
 b)    Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture, dampness or corrosive 
environments, unauthorized modifications, unauthorized repair, 
neglect, rough handling, abuse, accident, alteration, improper 
installation, incorrect voltage application, food or liquid spoilage, 
acts of God.
67
Warranty 
						

							 c)  Normal w ear and tear.
 d)   If the Pr oduct has been opened, modified or repaired by anyone other than a warranty service center or if it is repaired using 
unauthorized spare parts.
 e)   If the s erial number or mobile accessory date code has been removed, erased, defaced, altered or are illegible in any way subject 
to sole judgment of ZTE.
LIMITED WARRANTY
TO THE EXTENT PERMITTED BY APPLICABLE LAW, THIS LIMITED 
WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST ZTE AND 
ZTE’S SOLE AND EXCLUSIVE LIABILITY IN RESPECT OF DEFECTS IN 
PRODUCT. HOWEVER, THIS LIMITED WARRANTY SHALL NOT EXCLUDE 
NOR LIMIT ANY OF YOUR LEGAL (STATUTORY) RIGHTS UNDER THE 
APPLICABLE NATIONAL LAWS.
TO THE EXTENT PERMITTED BY APPLICABLE LAW ZTE DOES NOT 
ASSUME ANY LIABILITY FOR LOSS OF OR DAMAGE TO OR CORRUPTION 
OF DATA, FOR ANY LOSS OF PROFIT, LOSS OF USE OF PRODUCTS OR 
FUNCTIONALITY, LOSS OF BUSINESS, LOSS OF REVENUES OR LOSS 
OF ANTICIPATED PROFIT, INCREASED COSTS OR EXPENSES OR FOR 
ANY INDIRECT, OR SPECIAL OR CONSEQUENTIAL LOSS OR DAMAGE. 
TO THE EXTENT PERMITTED BY APPLICABLE LAW, ZTE’S LIABILITY 
SHALL BE LIMITED TO THE PURCHASE VALUE OF THE PRODUCT. THE 
ABOVE LIMITATIONS SHALL NOT APPLY TO DEATH OR PERSONAL 
INJURY CAUSED BY DEFECT OF PRODUCT IN MATERIAL, DESIGN AND 
WORKMANSHIP.
68 Warranty 
						

							69
Warranty
 
How to Get Warranty Service
To obtain warranty service, please call (877) 817-1759. Please have the 
following information available when you send the phone in for repair:
•   A valid Proof of Purchase
•   Return  address
•   Daytime phone number or fax number
•   Model  #
•   IMEI # (Look for the 15-digit IMEI # behind the battery of the device.)
•   Complete description of the problem
•   Transportation  prepaid
Other Warranty Program
You may have other warranty programs with your purchase, such as 
warranty exchange. If so, please refer to equipment package or the original 
point of sale. 
						

							Notes
70Notes