Bang & Olufsen BeoVision 4 Users Guide

1BeoVision 4
Guide 

CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts 
inside. Refer servicing to 
qualified service personnel.
WARNING:To prevent fire or electric
shock, do not expose this appliance
to rain or moisture.
This symbol indicates that a
dangerous voltage constitut-
ing a risk of electric shock is
present within this unit.
This symbol indicates that
there are important
operating and maintenance
instructions in the literature
accompanying this unit.
Caution
To...

3
This Guide contains all the relevant information
about the connection, setting-up and use of
your BeoVision 4 plasma screen with a Bang &
Olufsen BeoSystem 1. A chapter overview is
shown to the right.
If you wish to mount BeoVision 4 on a table
stand or in a wall bracket, please refer to the
manual enclosed with the table stand or 
bracket for instruction.
Contents of the Guide
Set up BeoVision 4
4Handling BeoVision 4
4Placing BeoVision 4 in your home
5Overview of the close-up operation and
socket...

4Set up your BeoVision 4
We recommend that you follow the
procedure described below when
you set up BeoVision 4:
– Unpack BeoVision 4 and place it as
described and illustrated to the
right under Handling BeoVision 4;
– Consider the appropriate 
placement for BeoVision 4. Guide-
lines are included to the right
under Placing BeoVision 4 in your
home;
– Connect the cables as described in
Connect BeoVision 4 to 
BeoSystem 1. For information
about how to fasten and run the
cables on the rear of BeoVision 4,...

5
Overview of close-up operation and
connection panels
1Speaker connection panels*
2A/V connection panel
3Mains connection
4Close-up operation panel
*Note: If you wish to connect external loudspeakers,
connect them to the loudspeaker sockets on
BeoSystem 1. For further information, please refer to
the Guide enclosed with BeoSystem 1.
Running the cables
Secure the cables you have connected to
BeoVision 4 with the cable bands, as shown in
the diagram.
The supplied mains lead and plug are specially
designed...

6
This chapter describes how to 
connect BeoVision 4 to a Bang &
Olufsen BeoSystem 1.
Please refer to the facing page for
more information about the socket
panels on BeoVision 4.
Connect BeoVision 4 to BeoSystem 1
Connect cables and the IR receiver
Make sure that both BeoVision 4 and
BeoSystem 1 are placed properly before 
connecting the systems.
If longer cables are necessary, they are 
available from your Bang & Olufsen retailer.
The plugs at the ends of these cables are all 
different, so it is not...

7The socket panel on the rear
The socket panel on the back of
BeoVision 4 contains connection
areas reserved for additional 
equipment.
However, we recommend that you
connect all extra equipment, such as
a DVD player or extra loudspeakers,
to your BeoSystem 1. This makes it
possible to operate all your 
equipment with the Beo4 remote
control.
If you wish to connect equipment to
BeoVision 4 and would like further
information about connection of
compatible equipment, please 
contact your Bang & Olufsen...

8
The close-up operation panel on
BeoVision 4 allows you to switch
BeoVision 4 on or off.
The close-up operation panel
ON / STAND BY
Buttons on the close-up operation panel
ON / STAND BY
Switches the screen on or off.
The additional buttons on the close-up operation
panel are not functional in systems where
BeoVision 4 is connected to BeoSystem 1. 

9
Cleaning BeoVision 4
Wipe dust off the surfaces using a dry, soft
cloth. Remove grease stains or persistent dirt
with a lint-free, firmly wrung cloth, dipped in
a solution of water containing only a few
drops of mild detergent, such as washing-up
liquid.
About the screen…
Wipe the screen surface gently using only a 
cleaning cloth or a soft, lint-free cloth. If the 
surface is particularly dirty, wipe it clean with a
soft, lint-free cloth which has been dipped in pure
water. If necessary, a...

10
3508409   0106Printed in Denmark by Bogtrykkergården a-s, Struer
For your information…
Your needs as a user are given careful 
consideration during the design and develop-
ment process of a Bang & Olufsen product
and we strive to make our products easy and
comfortable to operate.
Therefore, we hope that you will take the
time to tell us about your experiences with
your Bang & Olufsen product. Anything 
which you consider important – positive or
negative – may help us in our efforts to refine
our...