Bang & Olufsen Beovision 8-40 Television User Manual

							BeoVision 8-40  
						

							This Getting Started contains information about the daily use of your Bang & Olufsen product and connected equipment. We expect your retailer to deliver, install and set up your product.
Your television offers more features and functions than described in this Getting  Started. Among other things; Timer functions and auto standby, editing and naming channels. These and other features are described in more detail in a Guide. 
The Guides are found on www.bang-olufsen.com/guides  DVB functions are described in a separate Guide. The Guides are kept up to date if new software introduces new or modified features and functions in your television.
On www.bang-olufsen.com you can also find further information and relevant  FAQs about your product.
Your Bang & Olufsen retailer is your first stop for all your service queries.  To find your nearest retailer, visit our website …   www.bang-olufsen.com 
Dear Customer 
3510594 1006 
Technical specifications, features and the use 
thereof are subject to change without notice.  
						

							Cautions 
–  Ensure that the television is positioned, set up 
and connected in accordance with the instructions in this Getting Started. 
–   Place your television on a firm, stable surface. 
To prevent injury, use Bang & Olufsen approved  stands and wall brackets only! 
–   Do not place any items on top of your television.  
–  Do  not  subject  the  television  to  rain,  high 
humidity  or sources of heat. 
–  The television is developed for indoor use in dry, 
domestic environments only. Use within a 
temperature range of 10 – 40°C (50 –105°F), and  at an altitude of no more than 1,500 m 
(5,000 ft). 
–  Do not place the television in direct sunlight, as 
this may reduce the sensitivity of the remote  control receiver. 
–  Leave enough space around the television for 
adequate ventilation. 
–   Connect all cables before connecting or 
reconnecting  any of the  products  in your  system 
to the mains. 
–  No naked flame sources, such as lighted candles 
should be placed on the apparatus. 
–  Do not attempt to open the television. Leave 
such operations to qualified service personnel. 
–  Do not strike the glass with hard or pointed 
items. 
–  The  television  can  only  be  switched  off 
completely  by disconnecting it from the wall 
socket. 
–  The supplied mains cord and plug are specially 
designed for the television. If you change the 
plug or in any way damage the mains cord, it 
can affect the T V performance.WARNING: To reduce the risk of fire or 
electric shock, do not expose this 
appliance to rain or moisture. Do not  expose this equip  ment to dripping or 
splashing and ensure that no objects 
filled with liquids, such as vases, are  placed on the equipment. 
To completely disconnect this equipment  from  the  AC  Mains,  disconnect  the  mains 
plug  from  the  wall  socket.  The  disconnect 
device shall remain readily operable. 
The lightning flash with arrowhead 
symbol within an equilateral triangle, is intended to alert the user to the 
presence of un  
insulated “dangerous 
voltage” within the product’s en -
closure that may be of sufficient 
magnitude to constitute a risk of  electric shock to persons.
 
The exclamation point within an equi -
lateral triangle is intended to alert the 
user to the presence of important  operating and main  
tenance (servicing) 
instructions in the literature 
accompanying the product.   
						

							Daily use
Contents 
   Daily use 
6    How to use your remote control 
8    Introduction
10  Watch television 
12   Look up teletext
14  Watch television via the DVB module 
16  Change sound type and picture format
    Installation 
18  Set up your television 
20  Connection panels 
22  First-time setup of your television  
						

							TV LIGHT RADIO  
DTV  DVD  CD 
V.MEM TEXTA.MEM
7 8 9 
4  5 6 
LIST0 MENU 
1  2 3 
ST\fP PLAY
\bACK
How to use your remote control 
Important 
– for more information: www.bang-olufsen.com 
Select colour specific functions 
Adjust volume 
To mute, press the middle of the button 
The Beo4 display shows you the activated source or function 
Navigation and centre button; move lef t, right, up and down 
, ,  and  – move in 
menus by pressing the button in the direction you need 
Centre button is used for selecting and accepting Rewind or wind, search backwards or forwards 
Start playback of a DVD, CD or recording  Switch on the DVB module and watch digital television 
Standby  Bring up the main menu of the active source 
Pause and stop playback or recording 
Switch on the T V*
1 
Select channels and enter information in on-screen menus 
Step through channels  Hold for continuous step 
Move backwards through menus and the Beo4 list. Long press to exit menus  completely 
Beo4 operation 
Your television can be operated with the Beo4 remote control. 
Switch on teletext 
Display extra “buttons” for functions or sources in the Beo4 display. Use 
 or  to 
step in the list 
Some buttons can be reconfigured during the setup process. See the Guide for further information.  NOTE! For general information about remote control operation, see the Guide enclosed with your remote 
control. 
1*Beo4 buttons  
T V 
PL AY
T V
DT V
0 – 9
STOP
MENU
BACK
TEXT
LIST
6  
						

							STOP PLAY 
BACK 
  Living Room
TV  V.MEM  RADIO
DTV  N.MUSIC  N.RADIO
PC  DVD  CD
Daily use
2*About buttons 
3*Coloured buttons 
Actual zone 
Soft buttons on Beo5   Light grey buttons indicate that you have to press a text in the display. Dark grey buttons indicate that you have to 
press a hard button. 
Press the wheel next to the colour to activate a coloured button.  Indicates the actual zone on Beo5 as it was named during the setup process. 
Depending on the activated source, different soft buttons appear on the screen. Touch the screen to activate the 
function. 
Start playback of a DVD, CD or recording 
Step through channels or recordings  Hold for continuous step  Navigation button lef t, right, up and down – move in menus by pressing the 
button in the direction you need  
Standby  Rewind or wind, search backwards or forwards  Pause and stop playback or recording 
Sof t button, touch screen to select*
2
Switch on a source or select a function 
Centre button is used for selecting and accepting 
Turn to adjust volume 
To mute, turn quickly counter-clockwise  Bring up SCENE buttons, such as Zones or Speaker 
Press again to return 
Select colour specific functions*
3 
Press volume wheel next to the colour  Bring up digits to select for example channels 
Press again to return  Back up through Beo5 displays 
Move backwards through menus. Long press to exit menus completely 
Beo5 operation 
You can also operate your television with a Beo5. When Beo5  operation is different from Beo4 operation, it is described separately.
PL AY
STOP
T V 
BACK
+
7   
						

							Navigate in menus and select settings using your remote control. Pressing menu brings up the menus for the selected source
*1.
Information about the selected source is shown at 
the top of the screen. On-screen menus allow you 
to adjust settings. 
Display and menus 
Introduction 
Show menu*1Switch on T V  Switch on connected equipment 
or
Important  
In the OPTIONS menu, you can bring up the BEO4 SET TING menu. In this menu you must set up your 
television to be operated with a Beo4 with or without a navigation button. Remember to set your Beo4  remote control to the correct mode. See the Beo4 Guide or contact your Bang & Olufsen retailer for 
further information. 
If you have disabled the T V tuner, you must press MENU twice to bring up the T V SETUP menu.
BEO4 SET TING menu 
1*T V SETUP menu 
TV SETUP
TUNING
S
LEEP  TIMER
PLA Y TIMER
OPTIONS
  selec\f
T VV MEMMENU
8
Menu name 
Menu options 
Information field 
Example of on-screen menu    
						

							Daily use
When a menu is on the screen, you can move between menu options, reveal settings or enter data. 
Navigate in menus 
Select option/ setting  Enter data 
Bring up sub-
menu/store 
setting  Select option 
Move 
backwards 
through menus 
Remote control  On the first pages in this Getting Started, you will find an overview of the buttons on Beo4 and Beo5. 
For general information about remote control operation, see the Guide enclosed with your remote 
control.  or 
Press and hold to exit menus 
0 – 9BACKBACK 
9  
						

							Watch television 
Select a T V channel by its number or switch to another channel. Adjust the sound volume.Beo4 operation
Activate the TV source to use these functions Switch on the TV
Select a TV channel
Adjust the volume Bring up a channel list
Switch off the TV
TV CHANNEL LIS T
C NN  1
…  2
DISCO VER  3
CWNBC  \f
BBCWORLD  5
…  6
…  7
…  \b
S UPER CH  9
…  10
CRIME  TV  11
CINEMA  12
…  13
MO VIE NW  1\f
…  15
…  16
…  17
…  1\b
more  select
10
Channel name 
Channel number  
Indicates that more channels are available