Bang & Olufsen Television Beovision10 User Manual

							BeoVision 10 
Guide  
						

							Read these instructions. 
Keep these instructions.  Heed all warnings.  Follow all instructions. 
Do not use this apparatus near water. 
Clean only with dry cloth.  Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions. 
Do not install near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat. 
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A 
grounding type plug has two blades and a third 
grounding prong. The wide blade or the third  prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet. 
Protect the power cord from being walked on or  pinched particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus. 
Only use attachments/accessories specified by the  manufacturer.  Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution  when moving the cart /apparatus combination to 
avoid injury from tip-over. 
Unplug this apparatus during lightning storms or  when unused for long periods of time. 
Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been  damaged in any way, such as power-supply cord 
or plug is damaged, liquid has been spilled or 
objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture,  does not ope   rate normally, or has been dropped. 
The mains plug of the power supply cord shall  remain readily operable. 
Do not expose batteries or battery packs to  excessive heat such as sunshine, fire or the like. 
Follow instructions to ensure correct and safe 
installation and interconnection of equipment in  multimedia systems. WARNING:  To reduce the risk of fire or 
electric shock, do not expose this 
appliance to rain or moisture. Do not  expose this equip  
ment to dripping or 
splashing and ensure that no objects 
filled with liquids, such as vases, are  placed on the equipment. 
To completely disconnect this equipment  from the AC Mains, disconnect the mains plug from the wall socket. The disconnect device shall remain readily 
operable. 
The lightning flash with arrowhead 
symbol within an equilateral triangle, is intended to alert the user to the 
presence of un  
insulated “dangerous 
voltage” within the product’s  enclosure that may be of sufficient 
magnitude to constitute a risk of  electric shock to persons.
 
The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important  operating and main  
tenance (servicing) 
instructions in the literature 
accompanying the product.   
						

							This guide contains information about the daily use of your Bang & Olufsen product and connected equipment. We expect your retailer to deliver, install and set up 
your product.
On www.bang-olufsen.com  you can find further information and relevant FAQs 
about your product. 
Your Bang & Olufsen retailer is your first stop for all your service queries.  To find your nearest retailer or contact Bang & Olufsen Customer Service, visit our  website …   www.bang-olufsen.com 
or write to:  Bang & Olufsen a/s  
  BeoCare  
  Peter Bangs Vej 15  
  DK–7600 Struer 
Dear Customer 
3510 529 10 02 
Technical specifications, features and the use 
thereof are subject to change without notice.  
						

							Cautions 
–  Ensure that the television is positioned, set up 
and connected in accordance with the instructions in this guide. 
–   Place your television on a firm, stable surface. 
To prevent injury, use Bang & Olufsen approved  stands and wall brackets only! 
–   Do not place any items on top of your television.  
–  Do not subject the television to rain, high 
humidity or sources of heat. 
–  The television is developed for indoor use in dry, 
domestic environments only. Use within a 
temperature range of 10 –35°C (50 –95°F), and  at an altitude of no more than 1,500 m 
(5,000 ft). 
–  Do not place the television in direct sunlight, as 
this may reduce the sensitivity of the remote  control receiver. 
–  Leave enough space around the television for 
adequate ventilation. 
–   Connect all cables before connecting or 
reconnecting any of the products in your 
system to the mains. 
–  No naked flame sources, such as lighted candles 
should be placed on the apparatus. 
–  Do not attempt to open the television. Leave 
such operations to qualified service personnel. 
–  Do not strike the glass with hard or pointed 
items. 
–  The television can only be switched off 
completely by disconnecting it from the wall 
socket. 
–  The supplied mains cord and plug are specially 
designed for the television. If you change the 
plug or in any way damage the mains cord, it 
can affect the T V performance. 
						

							Daily use
Contents 
  Daily use 
6    How to use your remote control 
8    Introduction 
10   Operate equipment with Beo4 and Beo5 
12    BeoLink system 
14   Surround Sound 
15   Adjust picture and sound settings 
16   Game mode and picture format 
17   Sleep Timer and Play Timer 
18   Turn the television 
   Installation and setting up 
20   Connect and set up an audio system 
22   Connect and set up a BeoLink System 
23   Your television in a link room 
24   Two televisions in the same room 
26   Set up your television 
28   Expand your setup 
30   Set up additional equipment 
32   Connection panels 
34   First-time setup of your television 
36   Loudspeaker setup 
38   Additional settings 
39   On-screen menus 
39   Cleaning 
						

							TVLIGHT RADIO
DTV DVD CD
V MEMRECORD A MEM
78 9
456
TEXT0MENU
12 3
LIST EXIT
STOP
GO
How to use your remote control 
Information 
1*Some buttons can be configured during the 
setup process. See p. 29.  NOTE! For general information about remote 
control operation, see the guide enclosed with 
your remote control. 
Beo4 operation 
The instructions in this guide are mainly based on Beo4. 
In the ‘OPTIONS’ menu, you can bring up the ‘BEO4 SET TING’  menu. This menu is only relevant if you have a Beo4 remote 
control with a navigation button. See the Beo4 guide or contact 
your Bang & Olufsen retailer for further information. 
BEO4 SET TING menu   Select colour specific functions 
Adjust volume 
To mute, press the middle of the button 
The Beo4 display shows you the activated source or function 
Accept or store settings  Search backwards or forwards or move in menus 
Back up through menus 
 
Standby  Select channels and enter information in on-screen menus 
Step through channels or move in menus 
Display extra ‘buttons’ on the Beo4 
Press repeatedly to change ‘buttons’ 
Switch on the T V*
1 
Switch on a connected set-top box 
Bring up the main menu of the active source 
Exit menus completely
T V 
GO
STOP
TV
0 – 9
LIST
MENU
EXIT
DT V
6 
						

							STOP PLAY 
BACK 
  Living Room
TV  V.MEM  RADIO
DTV  N.MUSIC  N.RADIO
PC  DVD  CD
Daily use
2*About buttons 
3*Coloured buttons 
Actual zone 
Soft buttons on Beo5   Light grey buttons indicate that you have to press a text in the display. Dark grey buttons indicate that you have to press a 
hard button. 
Press the wheel next to the colour to activate a coloured button.  Indicates the actual zone on Beo5 as it was named during the Beo5 configuration process. 
Depending on the activated source, different soft buttons appear on the screen. Touch the screen to activate the function. 
Start playback 
Step through channels  Search backwards or forwards or move in menus 
Standby  Search backwards or forwards or move in menus  Back up through menus 
Sof t button, touch screen to select*
2
Switch on a source or select a function 
Press centre button to accept or store settings 
Turn to adjust volume 
To mute, turn quickly counter-clockwise  Bring up SCENE buttons, such as Zones or Speaker 
Press again to return 
Select colour specific functions*
3 
Press volume wheel next to the colour  Bring up digits to select channel 
Press again to return  Back up through Beo5 displays 
Exit menus completely 
Beo5 operation 
You can also operate your T V with a Beo5. Where relevant Beo5  operations have been mentioned. 
PL AY
STOP
T V 
GO
+
BACK
7  
						

							Navigate in menus and select settings using your remote control. On page 39 you 
will find an overview of the menus in your T V. 
Information about the selected source is shown at 
the top of the screen. On-screen menus allow you 
to adjust settings. 
Display and menus 
Introduction 
Show menu 
Switch on T V  Switch on connected set-top box
or
Important – for more information: www.bang-olufsen.com 
Remote control 
The instructions in this guide are mainly based on the Beo4 remote control, but you can also operate the T V with Beo5. 
On the first pages in this guide, you will find an overview of the buttons on Beo4 and Beo5. For general information about remote control operation, see the guide enclosed with your remote control. 
TV SETUP
S LEEP  TIMER
PLA Y TIMER
OPTIONS
  select
TVDT VMENU
8
Menu name 
Menu options 
Information field 
Example of on-screen menu   
						

							Daily use
When a menu is on the screen, you can move between menu options, reveal settings or enter data. 
Navigate in menus 
Select option/ setting  Enter data 
Bring up sub-
menu/store 
setting  Select option 
Exit menus or 
Move backwards 
through menus
GO0 – 9EXITSTOP 
9 
						

							Operate equipment with Beo4 or Beo5 
The built-in Peripheral Unit Controller acts as an interpreter between connected video equipment, such as a set-top box, recorder or DVD player, and your Bang & Olufsen remote control. 
1*Menu overlay You cannot bring up the overlay in link rooms. Instead, press a 
desired coloured button or GO  followed by a number. 
Using the Beo4 you get quick access to selected 
function via the menu overlay. 
Show menu overlay*1 Select connected equipment  Select function 
Activate a function without the menu overlay.  
The connected equipment must be switched on. 
Direct Beo4 operation 
Select function 
NOTE! Which source button activates your peripheral unit depends on the settings in the 
‘CONNECTIONS’ menu. See p. 32. 
Useful hints 
Bring up menu overlay  or
or Activate function 
GUIDE
MENU
TEXT
INFO
WIDE1
2
3
4
5
MENU
1–9  
10
The Beo4 menu overlay