Barco MD-4221 Medical LCD Monitor User Manual

							 
  MD-4221 
42” HD MEDICAL LCD MONITOR 
 
 
  
 
User manual  
						

							  
 
2   
						

							  
 
  3 
Copyright notice 
This document is copyrighted.    All rights are reserved.    Nor this document, nor any part 
of it, may be reproduced or copied in any form or by any means - graphical, electronic, or 
mechanical including photocopying, taping or information storage and retrieval systems - 
without written permission of Barco 
© 2008 Barco N.V. All rights reserved. 
 
           제 품 명  : 42” LCD 모니터 
               모 델 명 : MD-4221 
               정격입력  : 100-230V~ 50-60Hz, 3A MAX 
               제 조 자 : ㈜디앤티 
 
DnT-MD-4221(B) 제조국가 : 대한민국 
  
						

							  
 
4  
Table of Contents 
 
Table of Contents ....................................................................................... 4
 
Preface........................................................................................................ 5 
Important notice.................................................................................... 5 
Environmental information................................................................... 5 
Safety Instructions................................................................................... 6 
On Safety ............................................................................................... 6 
Caution ................................................................................................... 8 
FCC Information ................................................................................... 11 
Electromagnetic compatibility ............................................................ 13 
Recommendations for using your display system............................. 14 
Unpacking and handling tips.............................................................. 14 
Preventing fire and injury................................................................... 15 
Explanation of symbols ....................................................................... 15 
Introduction .............................................................................................. 17 
Quick Startup ....................................................................................... 17 
Package Overview............................................................................... 17 
Connectors ........................................................................................... 18 
Mechanical product drawing .............................................................. 20 
Controls ................................................................................................ 21 
Power management ........................................................................... 23 
On-Screen Display Menus ........................................................................ 24 
OSD functions description ........................................................................ 29 
Standard signal table ............................................................................... 34 
PC modes supported ........................................................................... 34 
SDI video format ................................................................................. 35 
Signal connector pin assignments .......................................................... 36 
Specifications ........................................................................................... 40 
BARCO MID GENERAL WARRANTY TERMS AND CONDITIONS ................... 41 
  
						

							  
 
  5 
Preface 
Important notice 
Notice 
Although every attempt has been made to achieve technical accuracy in this document, 
we assume no responsibility for errors that may be found. Our goal is to provide you with 
the most accurate and usable documentation possible; if you discover errors, please let 
us know. 
Barco software products are the property of Barco. They are distributed under copyright 
by Barco N.V., for use only under the specific terms of a software license agreement 
between Barco N.V. and the licensee.    No other use, duplication, or disclosure of a Barco 
software product, in any form, is authorized.   
The specifications of Barco products are subject to change without notice. 
Trademarks 
All trademarks and registered trademarks are property of their respective owners. 
Environmental information 
Disposal Information 
The lamps inside the display contain mercury. Do not throw the display in the trash. 
Dispose of it as required by local ordinances or regulations. 
This equipment has required the extraction and use of natural resources for its production. 
It may contain hazardous substances for health and environment. 
In order to avoid the dissemination of those substances in the environment and to 
diminish the pressure on natural resources, we encourage you to use the appropriate 
take-back systems. 
Those systems will reuse or recycle most of the materials of your end-of-life equipment 
in a sound way. 
The crossed-out wheeled bin symbol invites you to use those systems. 
If you need more information on the collection, reuse and recycling systems, 
please contact your local or regional waste administrator. 
You can also contact us for more information on the environmental performances of our 
products.  
						

							  
 
6  
Safety Instructions 
On Safety 
1. Before connecting the AC power cord to the DC adapter outlet make sure the 
voltage designation of the DC adapter corresponds to the local electrical 
supply. 
2. Never insert anything metallic into the cabinet openings of the Liquid Crystal 
Display (LCD) monitor. Doing so may create the danger of electric shock. 
3. To reduce the risk of electric shock, do not remove cover. 
No user-serviceable parts inside. Only a qualified technician should open the 
case of the LCD monitor. 
4. Never use your LCD monitor if the power cord has been damaged. 
Do not allow anything to rest on the power cord, and keep the cord away 
from areas where people can trip over it. 
5. Be sure to hold the plug, not the cord, when disconnecting the LCD monitor 
from an electric socket. 
6. Unplug your LCD monitor when it is going to be left unused for an extended 
period of time. 
7. Unplug your LCD monitor from the AC outlet before any service. 
8. If your LCD monitor does not operate normally-in particular, if there are any 
unusual sounds or smells coming from it, unplug it immediately and contact 
an authorized dealer or service center. 
Warning 
Do not to touch signal input, signal output or other connectors, and the patient 
simultaneously. 
Warning 
External equipment intended for connection to signal input, signal output or other 
connectors, shall comply with relevant IEC standard (e.g.,IEC60950 for IT equipment and 
IEC60601 series for medical electrical equipment). 
In addition, all such combinations (systems) shall comply with the standard IEC 
60601-1-1, safety requirements for medical electrical systems. Any person who connects 
has formed at system and is therefore responsible for the system to comply with the 
requirements of IEC 60601-1-1. 
If in doubt, contact a qualified technician or your local sales representative.  
						

							  
 
  7 
Warning 
When necessary, carry this product with at least 2 persons, using both handles on left 
and right side of the product. If you want the product to be installed on another place, 
please contact Barco Customer Service center. 
On installation 
1. Openings in the LCD monitor cabinet are provided for ventilation. 
To prevent overheating, these openings should not be blocked or covered. If 
you put the LCD monitor in a bookcase or some other enclosed space, be sure 
to provide adequate ventilation. 
2. Put your LCD monitor in a location with low humidity and minimal dust. 
3. Do not expose the LCD monitor to rain or use it near water (in kitchens, near 
swimming pools, etc.). If the LCD monitor accidentally gets wet, unplug it and 
contact an authorized dealer immediately. You can clean the LCD monitor with 
a damp cloth if necessary, but be sure to unplug the LCD monitor first. 
4. Locate your LCD monitor near an easily accessible AC outlet. 
5. High temperature can cause problems. Dont use your LCD monitor in direct 
sunlight and keep it away from heaters, stoves, fireplaces, and sources of 
heat. 
Environmental Conditions for transport and Storage 
• Temperature range within -20°C to 60°C 
• Relative humidity range 10% to 85% 
• Atmospheric pressure range within 500 to 1060hPa. 
Rapid change in ambient temperature may adversely affect the product. 
Allow about 8 hours for the product to reach an ambient temperature for starting 
use. 
Intended Use 
This TFT-LCD Monitor is as accessory intended for use with Medical Equipment to display 
alpha, numerical and graphical data.  
						

							  
 
8  
Caution 
 
 
 
To prevent fire or shock hazards, do not expose this unit to rain or moisture. Also, do not 
use this units polarized plug with an extension cord receptacle or other outlets unless 
the prongs can be fully inserted. 
The display is designed to meet the medical safety requirements for patient vicinity 
device. 
This device may not be used in connection with life support equipment. 
 
This symbol alerts the user that important literature concerning the 
operation of this unit has been included. Therefore, it should be read 
carefully in order to avoid potential problems. 
 
This symbol warns user that un-insulated voltage within the unit may 
have sufficient magnitude to cause electrical shock. Therefore, it is 
dangerous to make contact with any part inside the unit. To reduce the 
risk of electric shock, DO NOT remove cover (or back). 
There are no user serviceable parts inside. Refer servicing to qualified 
service personal. 
Underwriters Laboratories (UL) Classification:
 
UL safety Compliance: 
This LCD monitor is U.L. Classified WITH RESPECT TO ELECTRIC SHOCK, FIRE 
  AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH   
  UL 60601-1/CAN/CSA C22.2 NO. 601.1 
EEC Safety Compliance: 
This display unit meets the requirements of EN-60601-1 so as to conform 
to the Medical Device Directive 93/42/EEC (general safety information). 
Using Plug for US: 120V rating 5-15P type only. 
Caution: Make sure the power cord is the correct type that is required in your area. 
This LCD monitor has a universal power supply that allows operation in either 100-120V 
AC or 200-240V AC voltage areas (no user adjustment is required).  
						

							  
 
  9 
Use the proper power cord with correct attachment plug type. If the power source is 
120V AC, use a power cord which is a Hospital Grade Power Cord with NEMA 5-15 style 
plug, labeled for 125 volts AC with UL and C-UL approvals. If the power source is a 240 V 
AC supply, use the tandem (T blade) type attachment plug with ground conductor power 
cord that meets the respective European countrys safety regulations. 
The hospital-grade plug for medical products intended for use in Denmark has DEMKO 
approval and is rated 13 amps at 250Vac. Plug is recommended for use in medical 
applications and specifications are being added to the standard S B 107-2-D1. Plug mates 
with makers Danish hospital-grade socket. Hospital sockets have slightly different 
shaped openings allowing only the hospital plug, not the standard Danish plug, to be 
inserted, to protect the ac circuit in specific medical settings. 
 
Cleaning Instructions 
Follow your hospital protocol for the handling of blood and body fluids. 
Clean the display with a diluted mixture of mild detergent and water. Use 
a soft towel or swab. 
Use of certain cleaning agents may cause degradation to the labels and 
plastic components of the product. 
Consult cleanser manufacturer to see if agent is compatible with it. Do not 
allow liquid enter the display. 
Maintenance 
Replacing the Fuses: 
To avoid the risk of fire, use only fuses of the value specified on the fuse 
label located on the rear panel. 
• Unplug the power cord from the wall outlet.   
• Unlatch the fuse holder above the AC inlet and remove it. (You may need to 
press the tab on the fuse holder with a slender screwdriver to release the latch) 
• Replace the fuse with the same value and rating. 
• Reinstall the fuse holder until the tab snaps in place.  
						

							  
 
10  
Servicing 
Do not attempt to service the apparatus yourself as opening or removing covers may 
expose you to dangerous voltages or other hazards, and will void the warranty. 
Refer all servicing to qualified service personnel. 
Unplug the apparatus from its power source and refer servicing to qualified personnel 
under the following conditions: 
• If the power cord or plug is damaged or frayed. 
• If liquid has been spilled into the apparatus. 
• If objects have fallen into the apparatus. 
• If the apparatus has been exposed to rain or moisture. 
• If the apparatus has been subjected to excessive shock by being dropped. 
• If the cabinet has been damaged. 
• If the apparatus seems to be overheated. 
• If the apparatus emits smoke or abnormal odor. 
• If the apparatus fails to operate in accordance with the operating instructions. 
Accessories 
Use only accessories specified by the manufacturer, or sold with the apparatus. 
Classification 
• Protection against electric shock : Class I 
• Applied Parts : No Applied Parts 
• Protection against harmful ingress of water : IPX1 
• Degree of safety in the presence of flammable anesthetics mixture with air or 
with oxygen or with nitrous oxide: 
Not suitable for use in the presence of a flammable anesthetics mixture with 
oxygen or with nitrous oxide. 
• Mode of operation: Continuous. 
.