Beko Wkd 25100 T Users Manual

15
Pressing “On/Off”
By	pressing	“On/Off”	button	you	can	make	your	machine	
ready for selecting program. When “On/Off” key is pressed 
“door” led will light on meaning “door can open”. Press 
“On/Off” key again for turning your machine off. 
Pressing “On/Off” does not mean program started opera-
tion.	You	must	press	“Start/Pause/Cancel”	for	starting	the	
program. 
Child-proof lock
During washing laundry in order to maintain that program 
progress is not affected by pressing keys by children there 
is...

16
completed “Ready” led will be on again. 
During machine operation you can press “Start/Pause/
Cancel” key for getting machine to “Pause” position. In this 
case “Start/Pause/Cancel” led will blink. 
Changing Program 
You	can	use	this	feature	for	washing	laundry	in	the	same	
textile group for washing at lower or higher temperatures. 
For example, instead of Cotton60, Cotton40 can be used. 
For selecting Cotton40 instead of Cotton60 by pressing 
“Start/Pause/Cancel” key machine is switched to pause...

17
Canceling a Program 
For canceling a program “Start/Pause/Cancel”  key is 
pressed for three seconds. After this period “Start/Pause/
Cancel”		and	all	other	leds	will	be	off	.You	can	select	a	new	
program and start washing.
If cancel task is performed during washing “Spin” led on 
display will light on, machine will pump and when “Spin” led 
is off “door” led will be on, door can be opened and new 
program can be selected. 
Even program selection button is changed during the 
program initially...

18
Detergent Dispenser
Powder detergent residue may accumulate in drawer 
after a while. In order to clean detergent drawer press the 
marked point of the siphon on softener compartment and 
push the drawer towards yourself. Wash the drawer with 
water 
Siphon
Do not neglect cleaning suction cup when it becomes 
soiled. In order take suction cup out first take detergent 
drawer out. Clean it in order to eliminate blocking by soft-
ener residue. After cleaning place suction cup to its place 
and make sure...

19
Cleaning Pump Filter 
There is filter system maintaning long lifetime of pump by 
blocking	foreign	objects	like	button,	cloth	fiber	enter	to	the	
pump during drain of washing water. It is useful to clean 
the filter when it is soiled. 
In order to do this:
Unplug your machine. Open the filter at bottom right corner 
by pressing marked space on the lid.
Hot	water	risk:	There	might	be	15	lt.,	90°C	hot	water	in	the	
drum. Open the filter carefully.Before	opening	the	filter	drain	the	water	with	drain...

20
      Installation
If your system is not ready, let a certified plumber make it 
ready.  
1.  Removing the transportation safety bolts
Before	the	washing	machine	is	operated,	the	transit	bars	
must be removed! In order to do this:
1. Loosen “C” bolts by rotating them counter clockwise 
with a suitable spanner 
2. Remove transportation safety bolts by turning. 
3. Place “P” plastic covers onto the openings of transpor-
tation locks by rotating in direction of arrow and pushing. 
Attention please! Keep...

21
tion. Seals on machine side must be connected filter 
cannal.
After connecting the hose, check all connections for 
leaks In order to eliminate any risk due to water leakage 
keep the taps off when machine is not used.
 
Your	machine	will	operate	efficiently	if	the	water	from	
tap is minimum 1 and maximum 10 bars. Practically 1 
bar means 8 liters of water in one minute when tap is 
fully on. 
Connect hose to the machine. Tighten bolts with hand 
power, do not use spanner.
Double inlet models can be...

22
4. Electrical connection
Connect the power cord to the appropirate electrical sys-
tem which is being supported by the maximum voltage and 
current rating indicated on the rating plate placed inside the 
kick plate.
Look! Page 1, Steps before operating Fullautomatic Wash-
ing Machine and safety precautions.
Make sure that you have grounded power outlet. 
Attention!	Before	any	operation	of	the	machine	check	the	
following.
•	Did	you	close	the	front	door?
•	Is	the	tap	open?
•	Is	water	drain	hose	placed...

23
      Helpful tips on stain removal7
Alcoholic baverages: Wipe the fabric first with water, then water-
glycerine solution and rinse with vinegar-water solution.
Shoe polish: Without harming the fabric, remove the stain care-
fully and grind it with detergent. If this doesn’t help, prepare a 
water to alcohol solution (2 to 1) and rub the fabric, then wash it 
with warm water. 
Tea and coffee: Pour hot water on to the stain and the fabric is 
white, pour some bleach and rinse it with water.
Bubblegum:...

24
      Before calling service
You turned the machine on, but the leds are off on 
the panel.
Check the grounding on the power cable or a blown fuse. 
Check the front door proper closure.
Machine does not take water.
Check the front door for proper closure. Either taps are 
closed or water intake filters are clogged.
Taken water is directly discharged.
Check if the discharge hose placed as described in the us-
ers manual or not.  Water coming from beneath the machine.
Check the water intake and drain...