BEKO WMD 25105 TS User Manual

WMD 25105 TS
WMD 25105 T
WMD 25085 T
Washing Machine
Plně automatická pračka
Automatická pračka Pralka automatyczna
Downloaded From WashingMachine-Manual.com Manualš 

2 - EN
1 Warnings
General Safety•  Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.
•  If the power cable or mains plug is 
damaged you must call Authorized Service for repair.
•  Fit the drain hose into the discharge 
housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is 
very important that the...

3 - EN
2 Installation
Removing packaging 
reinforcementTilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
Opening the transportation locksA  Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!
1.  Loosen all the bolts with a spanner until 
they rotate freely (“C”)
2.  Remove transportation safety bolts by 
turning them gently.
3.  Fit the covers (supplied in the bag with...

4 - EN
come out wet.
•   The hose should be pushed into the 
drainage for more than 15 cm. If it is too long you may have it shortened.
•  The maximum length of the combined 
hoses must not be longer than 3.2 m.
Electrical connectionConnect the machine to an earthed outlet protected by a fuse of suitable capacity.
Important:
•   Connection should comply with 
national regulations.
•   The voltage and the allowed fuse 
protection are specified in the section “Technical Specifications”.
•   The specified...

5 - EN
4  Selecting a Program and Operating Your Machine
Control panel
1 -  Spin Speed Adjustment Knob *
2 -  Time Delay Button *
3 -  Temperature Adjustment Knob *
4 -  Start/Pause/Cancel Button
5 -  Auxiliary Function Keys
6 -  Program Selection Knob7 -  On/Off Button
8 -  Program Follow-up Indicators *
9 -  Child-proof Lock Indicator *
* According to your machine’s model
Turning the machine on You can prepare the machine for program selection by pressing the “On/Off” button. When the “On/Off” button...

6 - EN
vigorous washing movements during a longer washing cycle.
•SyntheticsYou can wash your less durable clothes on this program. Gentler washing movements and a shorter washing cycle is used compared to the “Cottons” program. It is recommended for your synthetic clothes (such as shirts, blouses, synthetic/cotton blended garments, etc.). For curtains and lace, the “Synthetic 40” program with pre-wash and anti-creasing functions selected is recommended.
•DelicatesYou can wash your delicate clothes on...

7 - EN
Program selection and consumption table
• : Selectable
* : Automatically selected, not cancellable.
**: Energy Label programme (EN 60456)
Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage.
C The auxiliary functions in the table may differ according to the model of your...

8 - EN
Auxiliary functionsAuxiliary function selection keysSelect the required auxiliary functions before starting the program.
C Auxiliary function buttons may differ according to the model of your machine.
Auxiliary function selectionIf an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
Auxiliary function that is not compatible with the...

9 - EN
or lower temperatures. You must cancel the ongoing program in order to change the washing program.
For example, press and hold the “Start/Pause/Cancel” button for 3 seconds in order to select “Cottons 40” program instead of “Cottons 60” program. Select the “Cottons 40” program. Start the program.
Switching the machine to standby 
modePress “Start/Pause/Cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the...

10 - EN
Draining any remaining water and 
cleaning the pump filterYour product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water.
•   If your machine fails to drain the water, 
the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump...