BEKO WMD 76100 User Manual

WMD 76120
WMD 76100
WMD 76080
Washing Machine
Plně automatická pračka
Automatická pračka
Pralka automatyczna
Downloaded From WashingMachine-Manual.com Manualš 

2 - EN
1 Warnings
General Safety•  Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.•  If the power cable or mains plug is damaged you must call Authorized Service for repair.•  Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the...

3 - EN
2 Installation
Removing packaging 
reinforcementTilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
Opening the transportation locksA  Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!1.  Loosen all the bolts with a spanner until they rotate freely (“C”)2.  Remove transportation safety bolts by turning them gently.3.  Fit the covers (supplied in the bag with the...

4 - EN
Electrical connectionConnect the machine to an earthed outlet protected by a fuse of suitable capacity.
Important:•   Connection should comply with national regulations.•   The voltage and the allowed fuse protection are specified in the section “Technical Specifications”.•   The specified voltage must be equal to your mains voltage.•   Connection via extension cords or multi-plugs should not be made.B  A damaged power cable must be replaced by a qualified electrician.B  The appliance must not be...

5 - EN
7.a  -  Spin Speed Indicator
7.b  -  Temperature Indicator
7.c  -  Spin Symbol
7.d  -  Temperature Symbol
7.e  -  Remaining Time and Delaying Time Indicator
7.f  -  Programme Indicator Symbols (pre-wash/main wash/rinse/softener/spin)
7.g  -  Economy Symbol
7.h  -  Time Delaying Symbol
7.i  -  Door Locked Symbol
7.j  -  Start Symbol
7.k  -  Standby Symbol
7.l  -  Auxiliary Function Symbols
4  Selecting a Program and Operating Your Machine
Control panelFigure 1
+
Reset
mini30
super
40
F1F2 F3F43’’...

6 - EN
program. Your laundry will be washed with vigorous washing movements during a longer washing cycle.
•IntensiveYou can wash your durable and heavily soiled clothes on this program. In this program, your clothes will be washed for a longer time and an extra rinse cycle will be made compared to the “Cottons” program.
• MiniThis program is used to quickly wash a small number of lightly soiled cotton garments.
•Hand WashYou can wash your woolen/delicate clothes that bear “not machine- washable” labels...

7 - EN
condition. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:
-   Adjust the spin speed.-   Press “Start/Pause/Cancel” button. 
Program resumes. Your machine drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at the end of the program.
Program selection and consumption table
•  Selectable
*  Automatically selected, not cancelable.
** Energy Label...

8 - EN
Auxiliary functionsAuxiliary Function Selection ButtonsC Select the required auxiliary functions before starting the program.C Some combinations cannot be selected together. (Ex.: Pre-wash) (Figure 1-5a) and Quick Wash (Figure 1-5b).
Auxiliary function selectionIf an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
(Ex.: If you want to...

9 - EN
Switching the machine to standby 
modePress “Start/Pause/Cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be added / taken out by opening the door.
Door lockThe Door Locked Symbol (Figure 2-7i) lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door...

10 - EN
Draining any remaining water and 
cleaning the pump filterYour product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water.
•   If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump...