Bench Mx750/mp780st Digital Projector User Manual

							Operation 51 The Information page displays the information and status of this projector.
The Conference Control page allows you to control computer’s display status of all the 
computers linked to this projector. 
						

							Operation 52The Crestron page is only available when you are  on a Wired LAN network. It also allows 
you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9.
i. These buttons function the same as the ones on the OSD menus or remote 
control. See 2. PICTURE on page 71 and Remote control on page 13 for 
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu 
settings.
ii. To switch input source, click on your desired signal.
iii. You can select a preferred OSD language.
i
i
i
ii
iii 
						

							Operation 53 The tools page allows you to manage the projector, configure the LAN control settings and 
secure access of remote network operation on this projector.
i. You can name the projector, keep track of its location and the person in charge of 
it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjustments, press the Send button and the data will be saved in the 
projector.
v. Press exit to go back to the Crestron remote network operation page.
iii
iiiv
v
i 
						

							Operation 54The info page displays the information and status of this projector.
i. Press exit to go back to the Crestron remote network operation page.
The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages once 
the password is entered. The default password is “0000”. If you want to change the password, 
please enter Basic page.
i 
						

							Operation 55 The Basic page allows you to change the password and select connected persons. The 
number of connected persons may affect the network display performance.
The Wired LAN page allows you to adjust the Wired LAN settings. 
						

							Operation 56The Wireless LAN page allows you to adjust the Wirless LAN settings.
Max. length for SSID string is 16 bytes. Please use a different SSID when more than two 
projectors are connecting through wireless LAN.
The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works. 
						

							Operation 57
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available 
network display and transfers the desktop contents to the network display via local network 
connection.
Be sure to turn off other virtual network control programs before using Q Presenter.
1. Connect the projector with the RJ45 cable, and make sure your laptop or computer 
also link to the LAN. See Configuring the Wired LAN Settings on page 47 and 
Configuring the Wireless LAN Settings on page 48 for details.
2. Find the IP address and enter the address of the projector in the address bar of your 
browser. See Controlling the projector remotely through a web browser on page 48 
for details. 
3. Download the Q Presenter, unzip it and complete program installation.
4. Once installed, double click the Q Presenter icon. The Q Presenter page appears.
5. Click the Search icon.
The Search page allows you to search and connect a network display.
i. You can key in the IP address (see Controlling the projector remotely through a 
web browser on page 48 for details.) or just click “Search”.
i
ii
iii
iv 
						

							Operation 58ii. Projectors linked in the LAN will be found. Then select the projector you want to 
link.
iii. Click “Connect”. Then you should be able to see the image on projector.
iv. You can click to disconnect all connected projectors..
The Special Feature page allows you to have some advanced functions to manage the display 
image on your projector.
i. Full Screen: whole image display on the projector. Selectable: a square will pop-up 
then you can move and drag the area you want to show the audience.
i
ii
iii 
						

							Operation 59 ii. You can select to stop/start displaying desktop contents to connected network 
display.
iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click 
the location you want to display. 4locations can be chosen (1-4) or 2 places (L and 
R) if it’s 2 computers. Once you click the place you want to display, the image 
appers on th eprojector. You can change th elocation anytime you want, even back 
to full screen or blank out.
The Basic and Advanced Settings pages allow you to configure the Q Presenter.
i. You can select whether to activate Remote Desktop function. If the Remote 
Desktop function is activated, you can change the Name and  Password. If it isn’t 
activated, the Name and Password will be gray out. 
ii. You can set the name and password of the connected computer. The Name must 
be eight capital letters from A-Z & 0-9. The Password must be 6 digits from 1 to 4.
iii.  When you install the Q Presenter, the program will automatically identify the 
language of your computer’s operating system and install the same language as 
your operating system. If your language isn’t included, the system will keep 
English as the default setting.
iv. You can select whether to allow notification message popup.
v. Once you set to activate 1:N display, 1PC/NB can display up to 8 projectors at the 
same time.
vi. Once set, press Apply to save the changes.
i
v
ii
iii
iv
vi 
						

							Operation 60vii. You can select Video or Graphic display mode. Graphic Mode: worse image 
quality but faster tramsmission speed. Video Mode: better image quality but 
slower transmission speed. However, the actual transmission performance was 
determined by the status of network usage at that time.
viii.You can adjust the capture rate. The network bandwidth may also affect the 
performance.
ix. You can select whether to automatically open the Q Presenter application when 
the computer is powered on.
x. Once set, press Apply to save the changes.
xi. You can link to the BenQ remote network operation page on page 48.
ix
x
xi
vii
viii