BenQ Bl2405ht User Manual
Have a look at the manual BenQ Bl2405ht User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2 Copyright Copyright 2013 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes. The performance of flicker-free may be affected by external factors such as poor cable quality, unstable power supply, signal interference, or poor grounding, and not limited to the above mentioned external factors. (Applicable for flicker-free models only.) Please follow these safety instructions for best performance, and long life for your monitor. Power Safety • The AC plug isolates this equipment from the AC supply. • The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet should be installed near the equipment and be easily accessible. • This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company. • An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must be used. Care And Cleaning • Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners. • Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided. • Never push objects or spill liquid of any kind into this product.
3 Servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as dropping or mishandling occurs, contact qualified service personnel for servicing. BenQ ecoFACTS BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the Bringing Enjoyment N Quality to Life corporate vision with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory requirement and standards pertaining to environmental management, BenQ has spared no efforts in pushing our initiatives further to incorporate life cycle design in the aspects of material selection, manufacturing, packaging, transportation, using and disposal of the products. BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure that consumers make informed green choices at purchase. Check out BenQs CSR Website at http://csr.BenQ.com/ for more details on BenQs environmental commitments and achievements.
4 Table of Contents Copyright ......................................................................................................................................2 Getting started .............................................................................................................................5 Getting to know your monitor ................................................................................................7 Front view .....................................................................................................................................................7 Back view ......................................................................................................................................................7 How to assemble your monitor hardware ...........................................................................9 How to detach the base ......................................................................................................................... 13 Using the monitor wall mounting kit ................................................................................................... 14 Assembling your monitor with a height adjustment stand (HAS) ................................ 15 How to attach the monitor base ......................................................................................................... 15 How to detach the base ......................................................................................................................... 17 Adjusting the monitor height ................................................................................................................ 18 Rotating the monitor .............................................................................................................................. 19 Viewing angle adjustment ....................................................................................................................... 20 Using the monitor wall mounting kit ................................................................................................... 21 Getting the most from your BenQ monitor ...................................................................... 22 How to install the monitor on a new computer .............................................................................. 23 How to upgrade the monitor on an existing computer ................................................................. 24 How to install on Windows 8 system ................................................................................................ 25 How to install on Windows 7 system ................................................................................................ 26 Picture optimization ................................................................................................................. 27 How to adjust your monitor ................................................................................................. 28 The control panel .................................................................................................................................... 28 Hot key mode ........................................................................................................................................... 29 Main menu mode ..................................................................................................................................... 30 Troubleshooting ....................................................................................................................... 44 Frequently asked questions (FAQ) ...................................................................................................... 44 Need more help? ..................................................................................................................................... 45
5 Getting started Getting started When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement. BenQ LCD Monitor Monitor Stand (for models without height adjustment stand) Monitor Base (for models without height adjustment stand) Monitor Base (for models with height adjustment stand) Quick Start Guide CD-ROM Power Cord (Picture may differ from product supplied for your region.)
6 Getting started Video Cable: D-Sub Video Cable: DVI-D (Optional accessory for models with DVI inputs, sold separately) Video Cable: HDMI (Optional accessory for models with HDMI inputs, sold separately) Audio Cable (Optional accessory for models with speakers, sold separately) • Available accessories and the pictures shown here may differ from the actual contents and the product supplied for your region. For cables that are not supplied with your product, you can purchase them separately. • Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport. Always keep the product and accessories out of reach of small children.
7 Getting to know your monitor Getting to know your monitor Front view Back view 1. Control buttons 2. Power button 1 2 3. Speakers (for models with speakers) 4. Input and output ports (vary by model, see Input and output ports on page 8) 5. Kensington lock slot 33 5 4 • Above diagram may vary depending on the model. • Picture may differ from product supplied for your region.
8 Getting to know your monitor Input and output ports Available input and output ports may vary depending on your purchased model. Check the Specification document on the provided CD for details. Models with HDMI inputs 1. AC power input jack 2. Audio Line In 3. Headphone jack 4. HDMI socket 5. DVI-D socket 6. D-Sub socket Models with dual inputs and speakers 123456 123 5 6
9 How to assemble your monitor hardware How to assemble your monitor hardware • If your model came with a height adjustment stand (HAS), refer to Assembling your monitor with a height adjustment stand (HAS) on page 15 for details on hardware installation. • If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. • The following illustrations are for your reference only. Available input and output jacks may vary depending on the purchased model. 1. Attach the monitor base. Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls. Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like the monitor packaging bag on the desk for padding. Gently lay the screen face down on a flat clean padded surface. Attach the monitor stand to the monitor base as illustrated until it locks in place. Gently attempt to pull them back apart to check that they have properly engaged. Orient and align the stand arm with the monitor, then push them together until they click and lock into place.
10 How to assemble your monitor hardware Gently attempt to pull them back apart to check that they have properly engaged. You should position the monitor and angle the screen to minimize unwanted reflections from other light sources. 2. Connect the video cable Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. To Connect the D-Sub Cable Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. To Connect the DVI-D Cable Connect the plug of the DVI-D cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. -5O ~ +15O-5O ~ +15O Either Or