BenQ Dv3251 Users Manual

							On-Screen Display (OSD) menu 27
English
Audio menu
1. Press the MENU button to display the main 
menu.
2. Press the or buttons to select  Audio and then 
press  OK to enter the submenu.
3. Press the or buttons to select an item.
4. In the  Audio menu, use the or buttons to 
adjust the setting or select the options.
5. To return to the menu one level up, press the  MENU  button again.
ItemFunctionOperationRange
Vo l u m e Adjust volume level. Use 
 to increase or  to 
decrease volume. 0 to 47
Balance Adjust left or right speaker volume level. Use 
 to increase right speaker 
volume,   to increase left 
speaker volume level. -12 to 12
Sound 
Ty p e Selects a sound type for current viewing input 
source.
The items available for selection will 
vary depending upon the TV sound 
system being transmitted.
If the sound quality is poor, try using 
Mono as this is stronger.
Use the 
 and   buttons on 
the remote control or the 
Vo l u m e  and  Vo l u m e  
 buttons on the display to 
change the selection. • Auto
•Mono
•Stereo
•Sound 1
•Sound 2
•Sound 3
•NICAM
Steady 
Sound Automatically adjusts the sound level to be 
constant amongst different TV stations when 
viewing TV programs.
• Off
• Auto
Spe ake r 
Out Enables sound output from the display’s 
speakers when set to On. 
You may wish to set this to Off when using an 
external sound system.
• Off
•On
Advanced Audio Settings
       - Press 
OK to enter.
Preset 
Mode Allows you to select a suitable audio preset 
mode according to the type of sound being 
played. 
If Personal is selected, you can adjust the 
Treble, Mid Treble, Middl
e, Mid Bass and Bass 
settings individually to your satisfaction. Use the 
 and   buttons on 
the remote control or the 
Vo l u m e  and  Vo l u m e  
 buttons on the display to 
change the selection. •Classic
•POP
•Jazz
•Rock
• Personal
Treble Adjust treble tones. Use
to increase treble tone,   
to decrease treble tone. -12 to 12
Current viewing 
input sourceAvailable sound types
AT V Auto, Mono, Stereo, NICAM, 
Sound 1, Sound 2, Sound 3 
(available options are dependent 
on the signal received)
AV 1 ,  AV 1  R G B ,  
AV 2  ( AV 2 - S ) ,  AV 3  
(AV3-S), AV4  (AV4-S) Stereo: audio input from the left 
and right channels
Sound 1: audio input from the left 
channel only
Sound 2: audio input from the 
right channel only
DV3251-En.fm  Page 27  Thursday, December 15, 2005  2:20 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu
28
English
Picture menu
Mid 
Treble Adjust mid-treble tones. Use
to increase mid treble 
tone, to decrease mid treble 
tone. -12 to 12
Middle Adjust mid tones. Use
to increase middle tone, 
  to decrease middle tone. -12 to 12
Mid Bass  Adjust mid-bass tones. Use
to increase mid bass tone, 
  to decrease mid bass. -12 to 12
Bass Adjust bass tones. Use
 to increase bass tone, 
 to decrease bass tone. -12 to 12
1. Press the  MENU button to display the menu.
2. Press the  or   buttons to select  Picture and 
then press  OK to enter the submenu.
3. Press the   or   buttons to select an item.
4. In the  Picture menu, use the  or  buttons to 
adjust the setting or select the options.
5. To return to the menu one level up, press the  MENU  button again.
ItemFunctionOperationRange
Picture Mode To restore a factory preset or user 
customized picture mode.
If Personal is selected, you can 
adjust the Contrast, Brightness, 
Colour and Sharpness settings 
individually to your satisfaction.
This option will not appear 
when PC or DVI (via the HDMI 
input) is the signal source.
Remember to press the Pre-
set 
 button on the remote 
control to switch to the pic-
ture mode you want to use.
Use the   and   buttons 
on the remote control or 
the  Vo l u m e and  Vo l u m e  
  buttons on the display 
to change the selection. •Standard
• Cinema
• Dynamic
• Personal
Contrast Adjusts image white level when 
Personal is select
ed as the Picture 
Mode. 
 for brighter whites
 for darker whites 0 to 64
Brightness Adjusts image black level when 
Personal is select
ed as the Picture 
Mode. 
 for brighter blacks
  for darker blacks 0 to 64
Colour Adjusts image colour level when 
Personal is select
ed as the Picture 
Mode.
This option will not appear 
when PC or DVI (via the HDMI 
input) is the signal source.
 for more intense colours
 for less intense colours. 0 to 64
DV3251-En.fm  Page 28  Thursday, December 15, 2005  2:20 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu 29
English
SharpnessAdjusts image sharpness level 
when Personal is selected as the 
Picture Mode.This option will not appear 
when PC or DVI (via the HDMI 
input) is the signal source.

 for sharper image
  for softer image 0 to 7
Colour TEMP. Adjust the colour tint of the black 
and white part of the image. Use the 
 and   buttons 
on the remote control or 
the  Vo l u m e  and  Vo l u m e  
 buttons on the display 
to change the selection. •
Wa r m : Biased 
toward red
• Normal : 
Standard video/
TV colour 
temperature
• Cool : Biased 
toward blue - for 
PC input
NTSC Tint Adjusts colour tint
This option is not available 
for PAL video sources.
 for redder tones 
  for greener tones 0 to 64
NTSC Setup Adjust the black level in NTSC 
video.
This option is not available 
for PAL video sources.
Use the 
 and   buttons 
on the remote control or 
the  Vo l u m e and  Vo l -
ume buttons on the dis-
play to change the 
selection. 0, 7.5 IRE
The following options will appear onl
y when PC is the signal source.
AutoAutomatically adjusts frequency, 
phase, H. position and V. position 
to place the image on the screen.
Press the 
OK button on the remote control or 
the  INPUT  button on the display to begin the 
auto adjustment function.
Frequency Adjusts the display clock frequency.
Use the  and   buttons 
on the remote control or 
the  Vo l u m e and  Vo l u m e  
 buttons on the display 
to change the selection. -15 to 15
Phase Adjusts the display clock phase. -15 to 15
H. Position Adjusts the horizontal position of 
the image. -30 to 30
V. Position Adjusts the vertical position of the 
image. -30 to 30
DV3251-En.book  Page 29  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu
30
English
Feature menu
1. Press the  MENU button to display the menu.
2. Press the  or   buttons to select  Feature and 
then press  OK to enter the submenu.
3. Press the   or   buttons to select an item.
4. In the  Feature menu, use the  or  buttons to 
adjust the setting or select the options.
5. To return to the menu one level up, press the  MENU  button again.
ItemFunctionOperationRange
Black Extension Enhances the contrast among details 
when viewing dark images.
Use the  and   buttons 
on the remote control or 
the  Vo l u m e and  Vo l u m e  
 buttons on the display 
to change the selection. •Low
• Middle
•High
•Off
ACE 
(Auto Contrast 
Enhancement) Adjusts the auto contrast 
enhancement function that 
optimizes the image contrast ratio 
for interlaced inputs only.
This option will not appear 
when PC, DVI (via the HDMI 
input), HDMI or HD Component 
Video (720p or 1080i) is the 
signal source.
•Low
• Middle
•High
•Off
Noise Reduction Adjusts the image noise reduction 
function that helps to remove noise 
in TV images. Suitable in fringe and 
poor TV reception areas.
This option will not appear 
when PC or DVI (via the HDMI 
input) is the signal source.
•Low
• Middle
•High
•Off
Aspect Ratio Adjust image aspect ratio.
The Real, Letter Box and Wide 
options are unavailable when 
PC or DVI (via the HDMI input) 
is the signal source.Refer to 
Aspect 
ratio behaviour 
on page 41 .
Auto Format Set the display to automatically 
adjust screen aspect ratio when the 
SCART input is used, or when a WSS 
(Wide Screen Signaling) signal is 
detected from Composite Video 
inputs (ATV, AV1, AV2, AV3 or 
AV4). •On
•Off
DV3251-En.book  Page 30  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu 31
English
Window menu
This item is available only when PC is the signal source.
1. Press the MENU button to display the menu.
2. Press the  or   buttons to select  Window and 
then press  OK to enter the submenu.
3. Press the   or   buttons to select an item.
4. In the  Window menu, use the  or  buttons to 
adjust the setting or select the options.
5. To return to the menu one level up, press the  MENU  button again.
ItemFunctionOperationRange
PIP Display Video and 
Graphic images 
simultaneously in either 
full-screen or Picture-In-
Picture mode.
Use theand buttons on the 
remote control or the 
Vo l u m e and 
Vo l u m e buttons on the 
display to change the selection. • Full Screen
• Video On Graphic
Video Input Select the video signal 
input source for the PIP 
function.
This option is 
available only if 
Video On Graphics 
is selected as the 
PIP mode.
ATV, AV1, AV1 RGB, 
AV2 (AV2-S), AV3 (AV3-
S), AV4 (AV4-S)
The AV2-S option is 
available only if S-
Video (Y/C) signal 
is detected from 
the SCART inputs. 
The AV3-S and 
AV4-S options are 
available only if the 
AV3 or AV4 S-Video 
signals are 
connected.
Graphics Input
Select the graphics signal 
input source for the PIP 
function. PC
PIP Audio (Picture-In-Picture 
audio)
Select which audio source 
you want to hear.
This option is 
available only if 
Video On Graphics 
is selected as the 
PIP mode.
•Main
•Sub
DV3251-En.book  Page 31  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu
32
English
TV menu
1. Press the  MENU button to display the menu.
2. Press the  or   buttons to select  TV and then 
press  OK to enter the submenu.
3. Press the   or   buttons to select an item.
4. In the  TV menu, use the  or  buttons to 
adjust the setting or select the options.
5. To return to the menu one level up, press the  MENU  button again.
ItemFunctionOperationRange
Country Select the country where 
you live. This assists the 
auto-tuning operation and 
allows programs to be 
stored on the corresponding 
program numbers.
For instance, Program 9 is 
stored on CH9, and 
responds to direct single 
numeric button program 
changing commands.
Use the
and buttons on 
the remote control or the 
Vo l u m e and  Vo l u m e  
buttons on the display to 
change the selection. •UK
•France
•Netherlands
•Germany
•Italy
•Spain
•Austria
• Belgium
• Luxemburg
•Switzerland
• Portugal
• Others
Standard Select the TV standard for 
your country.
Only available if Other is 
set as the Country menu 
item. •L
•BG
•I
•DK
Auto Installation Searches through all 
available programs and 
adds them to memory.
Beware that this erases all 
previously stored programs. Press 
OK to start.
Manual 
Installation Refer to 
Performing manual installation on page 33 .
Program Edit Refer to Editing programs on page 34 .
Child Lock Refer to Child lock on page 35 .
DV3251-En.book  Page 32  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu 33
English
Performing manual installation
The Manual Installation feature allows you to change the program locations that are stored in 
the TV Program memory of the display.
This option is not possible when the Child lock is activated. See Child lock on page 35.
1. From the TV Menu, press the   or   buttons to select  Manual Installation  and then press 
the  OK button. The Manual Installation menu will display: 
2. If the Country menu item is set to Other, you should press the  or  buttons to select a 
TV standard according to your region. See  TV menu on page 32.
3. Press the   button to highlight  Selected PR and then press the program selection buttons to 
input the TV program you want to set up.
4. Press the   button to highlight  Frequency and then press the  or  buttons to start the 
tuning system. If the tuned program is incorrect, press the or  button again until your 
desired program is located. You can directly input the frequency using the program selection 
buttons if you wish.
5. Press the   button to highlight  Fine Tune and then press the  or  buttons to adjust the 
reception of TV signal (only necessary where the image or sound reception is poor). 
6. If the SCART signal input is connected, press the   button to highlight  Decode and then 
press the  or  buttons to select from the following options:
• On : Select this option if an external de coder Set-Top-Box (STB) is being used.
• Off : Select this option if no external decoder STB is being used.
7. Press the   button to highlight  Text Code and then press the  or  buttons to select a code 
format for the Teletext function.
8. Press the   button to highlight  Store on Prog. and then press the  OK button to save this 
program to the TV Program memory.
9. Press the  MENU button again to close the menus.
DV3251-En.book  Page 33  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu
34
English
Editing programs
You can delete unwanted programs, add a program name and change the program position 
number.
This option is not possible when the Child lock is activated. See  Child lock on page 35.
Naming a program
1. In the TV Menu , press the   or   buttons to select  Program Edit and then press the  OK 
button. The following Program Edit menu will appear. 
2. Press the program selection buttons to select the program you want to name.
3. Press the   button to highlight  Edit Name then press the  OK button. 
4. Press the  or  buttons to highlight the character yo u want to edit, and then press the  or 
  buttons to change it to your desired character.
5. Repeat step 4 to edit other characters.
6. Press the  OK button to store the name.
7. Press the  MENU button again to close the menu.
Swapping programs
1. In the  TV Menu , press the   or   buttons to select  Program Edit and then press the  OK 
button.
2. In the Program Edit menu that appears, press the   button, and then the direct access 
program selection buttons to select the current program you wish to relocate to a different 
program position.
3. Press the   button to highlight  PR Swap and then press the direct access program selection 
buttons to select the new location for the prog ram. Two digit entry is required. For example, 
press 02 to select CH2. The program memory location is changed once the new numbers 
are entered.
4. Press the  MENU button to close the menu.
Locking (preventing a program from selection)/unlocking a program
1. In the  TV Menu , press the   or   buttons to select  Program Edit and then press the  OK 
button.
2. In the Program Edit menu that appears, press the   button, and then the direct access 
program selection buttons to select the number of the program you wish to lock.
3. Press the   button to highlight  PR Lock and then press the  or  buttons to select from the 
following options:
• On : Lock the selected program.
• Off : Unlock the selected program.
4. Press the  MENU button to close the menus. All programs which are locked cannot be viewed 
when the Child Lock function is enabled. See  Child lock on page 35.
Deleting a program
1. In the TV Menu , press the   or   buttons to select  Program Edit and then press the  OK 
button.
2. In the Program Edit menu that appears, press the   button, and then the program selection 
buttons to select the number of the program  you wish to delete from the program memory.
DV3251-En.book  Page 34  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu 35
English
3. Press the  button to highlight  PR Delete and then press the  OK button to delete the 
program.
4. Press the  MENU button to close the menus.
Child lock
The Child Lock function can be used to prevent access to selected programs. For example, to 
prevent children viewing inappropriate broadcast programs such as adult-only programs. 
This Child Lock  only affects the RF Antenna input (not AV inputs), and prohibits the selection 
or display of every program which has had its  PR Lock menu item set to On. See  Locking 
(preventing a program from selection)/unlocking a program on page 34 . 
The correct password is required to un lock and view those programs once the  Child Lock 
Activate  menu item is set to On.
WARNING: You will be inconvenienced if you activate the password functionality and subse-
quently forget the password. Write the password you use in this manual, and keep it in a safe 
place for later recall.
Enabling/disabling child lock
1. In the  TV Menu , press the   or   buttons to select  Child Lock and then press the  OK 
button. The following Child Lock menu will appear.
2. You will be prompted to enter the passwo rd (default password: 0000). Enter the password 
using the program selection buttons. When entering, you can press the   button to clear a 
wrong character. If you enter the wrong password, try again. 
IMPORTANT: Write your selected password down here in this manual so that it is available to you 
should you ever forget it
Password: __ __ __ __.
Keep this manual in a safe place.
3. Press the   button to select  Child Lock Activate  and then press the  or   buttons to select 
from the following options:
• On : Enables the Child Lock. Once enabled, th e preselected programs will be locked. 
• Off : Disables the Child Lock.
4. Press the  MENU button to close menus. 
Changing password
1. In the  TV Menu , press the   or   buttons to select  Child Lock and then press the  OK 
button.
2. Press the   button to select  Change Password  and then enter a new 4-digit password using 
the program selection buttons.
IMPORTANT: Write your selected password down here in this manual so that it is available to you 
should you ever forget it
Password: __ __ __ __.
Keep this manual in a safe place.
3. Enter the new password again using the program selection buttons.
4. Press the  MENU button to close the menu.
DV3251-En.book  Page 35  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr 
						

							On-Screen Display (OSD) menu
36
English
Setup menu
1. Press the  MENU button to display the menu.
2. Press the  or   buttons to select  Setup and 
then press  OK to enter the submenu.
3. Press the   or   buttons to select an item.
4. In the  Setup menu, use the  or  buttons to 
adjust the setting or select the options.
5. To return to the menu one level up, press the  MENU  button again.
ItemFunctionOperationRange
Language Select your desired language for 
the OSD menu.
Use the  and   buttons on 
the remote control or the 
Vo l u m e  and  Vo l u m e    
buttons on the display to 
change the selection. •English
•Français
• Nederlands
•Deutsch
•Italiano
• Español
Freeze Freeze the motion on the screen 
image (however, broadcast 
continues). •Off
•On
Backlight Adjust backlight intensity.
If Auto is selected, the ambient 
light sensor will be activated and 
the display’s backlight will be 
changed automatically according 
to the ambient lighting condition. • Auto
•Dark
•Normal
•Bright
Sleep Timer Set the Sleep timer to 
automatically turn off the display.  0, 30, 60, 90, 120, 
150, 180 minutes
DPMS The Display Power Management 
System (DPMS) protects the 
screen and enters power saver 
mode when no PC signal is 
detected. •Off
•On
DVI Input Select input signal type via DVI 
input if a PC or Video output 
device is connected to the display.
Remember to adjust the timing 
settings of the output device 
according to 
Supported Video 
(Component/DVI) Input Signal 
Timing  or Supported PC (D-
Sub/DVI) Input Signal Timing on 
page 40 . •PC
•Video
Reset All 
Settings Restore all settings to their default 
values.
The TV program settings will 
not be reset.
Press the 
OK button on the remote control or the  
Input  button on the display to activate the reset.
DV3251-En.book  Page 36  Monday, December 12, 2005  4:07 PM
Downloaded From TV-Manual.com Manualr