BenQ Fp73g User Manual

  31
  How to adjust your monitor
 
Miscellaneous sub-menu
Input Select:
Press the 
W or X keys to select D-sub (analog) 
or DVI (digital) input to activate the new 
settings.
Press the  Exit key to return to previous menu.
 
Sharpness:
Press the 
W or X keys to adjust the degree of 
Sharpness .
Press the  Exit key to return to previous menu.
 
Display Information:
Select  Display Information  to display the 
current monitor property settings. 
Press the  Exit key to return to previous menu.
 
 

32 Troubleshooting  
Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the How to adjust the screen resolution on page 20  section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the im age now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 21 section It 
is...

  33
  Troubleshooting
The image is distorted, flashes or flickers:
Read the  How to adjust the screen resolution on page 20  section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the  How to adjust the screen resolution on page 20  section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
Need more help?
If your problems remain after checking this...

34  Supported opearting modes  
Supported opearting modes
•Modes not listed in the table may not be supporte d. For an optimal picture, we recommended you 
choose a mode listed in the table above.
• There are 22 available modes that are compatible with Windows. 
• Image disruption may occur as a result of signal  frequency differences from graphic cards which 
do not correspond with the usual standard. This is not, however, an error. You may improve this 
situation by altering an automatic setting or by...

  35
  Specifications
Specifications
BenQ FP73G
1 1
111
ModelFP73G
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle (left/right, up/down)  17.0
”, active, TFT
432 mm
1,280 x 1,024
16.2 million
700:1 / 300 cd/m
2
6 ms 
150, 140 (CR=10)
170, 170 (CR=5)
Line frequency 
Image frequency 30 - 82 kHz Multi-
 frequency monitor
56 - 76 Hz modes within these parameters
Image diagnostics 
Controls 
Functions Digital, OSD Technology,
 iKey...

36 Specifications  
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
90-264 V, 47-63 Hz
363.8 x 356.5 x 135 mm
3.7 kg