Home > BenQ > Television > BenQ Mk2443 Users Manual

BenQ Mk2443 Users Manual

Here you can view all the pages of manual BenQ Mk2443 Users Manual. The BenQ manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 11

English
8  Section 1: Quick Start Guide
9. Activate the remote control
Installing batteries
    1.  Turn the remote control to reveal its back side, 
and open the lid of the battery compartment.
    2.  Insert the batteries (supplied) ensuring that the 
positive and negative marked battery terminals 
match the (+) and (-) marks in the battery 
compartment. Note that these batteries are 
provided for your convenience so that you can 
operate the display straight away. You should 
replace them as soon as...

Page 12

English
Section 1: Quick Start Guide     9
Using the remote control
 
1.   Point and aim the top front of the remote control 
directly at the display when pressing the buttons. 
  2.  The remote control must be held at an angle 
within 30 degrees of the display's remote control 
sensor window to function correctly. The 
distance between the remote control and the 
sensors should not exceed 5 meters.
  3.  Do not cover the sensor window on the front of 
the display (below the power indicator lamp), or...

Page 13

English
10  Section 1: Quick Start Guide
Before you can use your TV to view TV programs, you need to let it search for and tune 
TV station programs appropriate to your region. This process only needs to be done when 
the TV is newly installed, or whenever you install it in OSD menu for convenience of 
operation.
  1.  When Backlight  is highlighted, use the 
◄ or 
► buttons to adjust the backlight.
  2.  Press 
▼ button to select Language, use the 
◄ or 
► buttons to select the language 
displayed on...

Page 14

English
Section 1: Quick Start Guide     11
Care and cleaning information
•		 Always	turn	off	the	display	and	disconnect	it	from	the	mains	power	before	cleaning.
•		 Do	NOT	use	cream,	liquid,	aerosol	or	spray	cleaners.	Use	only	a	slightly	damp	well	wrung-out	(drip-free)	and	lint-free,	clean	soft	cloth	and	lightly	wipe	the	display.
  If necessary, use a pH-neutral liquid dish-washing detergent diluted with water on a 
separate clean lint-free cloth to remove oil or grease marks. Wipe over again with a...

Page 15

English
MK2443 LCD TV
Section 2: User Manual
We l c o m e
 

Page 16

English
Getting to know your TV     13
Getting to know your TV
 
Front view
No.Name Description
1 VOL +/- button • Adjusts the volume level of the speakers.
•	In	the	OSD	menu,	moves	the	selection	highlight	left	or	right	or	
changes settings.
2 MENU button Displays the OSD (On-Screen Display) menu if not visible, or 
exits the current menu if displayed.
3 Power/Standby 
button Toggles the display between standby mode and on.
4 CH +/- button • Press these buttons to sequentially change channels.
• In the...

Page 17

English
14 Getting to know your TV
Rear view
No. Name Description
A AC Power Switch Use this switch to turn the main power on/off.
B AC Power Input Connect to a AC power source.
C AV Composite Video 
Input Connect to the Composite video (AV) output of video 
devices.
D USB Terminal Connector	for	software	upgrades	and	Media	Play,	etc.
E HDMI2 Input Terminal Connect to the HDMI digital audio/video output on 
digital video devices.
F HDMI1 Input Terminal Connect to the HDMI digital audio/video output or DVI...

Page 18

English
Getting to know your TV     15
No.Name Description
K PC/DVI Audio In Connect to the audio output of PCs. This jack is used for 
PC Audio input, when the picture input is connected to 
VGA or DVI (via HDMI1 input) on the PC.
L SCART Input Connect to external equipment with scart socket. This 
scart input allows audio and CVBS/YC/RGB+CVBS. RGB, 
S-VIDEO from an external devise to be shown on your 
T V.
M SPDIF Optical output Connect this port to the SPDIF input of A/V device.
N Headphone Jack...

Page 19

English
16 Getting to know the remote control
1
22
23
25
24
26
2
3
4
8
6
7
12
11
10
13
17
21
5
9
20
18
16
15
19
27
30
33
34
35
29
28
31
3214
1.  POWER
Press this button to power the TV on or put it to the 
standby mode.
2. DTV/RADIO
Digital TV function. Switch between DTV/RADIO 
programs.
3. INFO
Press this button to display the input source 
4. SLEEP
Press this button to set the automatic shut-off timer.
5. SOUND
To select sound mode from Standard, Music, Movie, 
Sports, and User.
6. FREEZE
Press this...

Page 20

English
Getting to know the remote control     17
1
22
23
25
24
26
2
3
4
8
6
7
12
11
10
13
17
21
5
9
20
18
16
15
19
27
30
33
34
35
29
28
31
3214
14 .  Green/ Rotate
•	Green:	Function	key	for	teletext,	program	edit,	or	 electric program guide. 
•	Rotate:	Rotate	the	photo	90°,	180°,	270°,	360°	 clockwise in Media.
15. 
 Red/ Skip  (Backwards)
•	Red:	Function	key	for	teletext,	program	edit,	or	 electric program guide. 
•	Skip:	Go	to	previous	chapter/track/file	in	Media.
16. 
 Scan (Backwards) 
Search...
Start reading BenQ Mk2443 Users Manual

Related Manuals for BenQ Mk2443 Users Manual

All BenQ manuals