BenQ Mp610 Dlp Users Manual

Specifications 45
Specifications
Projector specifications 
All specifications are subject to change without notice. 
General
Product name Digital Projector
Model name MP610
Optical
Resolution 800 x 600 SVGA
Display system 1-CHIP DMD
Lens F/Number F=2.6 to 2.77, f= 20.4 to 23.5 mm
Lamp 200W lamp
Electrical
Power supply AC100–240V, 1.5A–3.2A, 50/60 Hz (Automatic)
Power consumption 285W (Max)
Mechanical
Dimensions 238 mm (W) x 94 mm (H) x 283 mm (D)
Weight 6 lbs (2.724 Kg)
Input terminal
Computer input...

Specifications 46
Timing chart
Supported timing for PC input
Supported timing for Component-YP
bPr input
Supported timing for Video and S-Video inputs
ResolutionHorizontal 
Frequency 
(kHz)Ve rt i c a l  
Frequency 
(Hz)Pixel 
Frequency 
(MHz)Mode
640 x 400 31.47 70.089 25.176 640 x 400_70
640 x 48031.469 59.940 25.175 VGA_60
37.861 72.809 31.500 VGA_72
37.500 75.000 31.500 VGA_75
43.269 85.008 36.000 VGA_85
800 x 60037.879 60.317 40.000 SVGA_60
48.077 72.188 50.000 SVGA_72
46.875 75.000 49.500 SVGA_75...

Specifications 47
Dimensions
Unit: mm
Downloaded From projector-manual.com BenQ Manuals 

Warranty 48
Warranty
Limited Warranty
BenQ warrants this product against any defects in material and workmanship, under 
normal usage and storage. 
Proof of purchase date will be required with any warranty claim. In the event this prod-
uct is found to be defective within the warranty period, BenQ’s only obligation and 
your exclusive remedy shall be replacement of any defective parts (labor included). To 
obtain warranty service, immediately notify the dealer from which you purchased the 
product of any...

Regulation Statements 49
Regulation Statements
FCC statement
CLASS B: This equipment generates, uses and can radiate radio frequency energy and, 
if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off 
and on,...