BenQ Mp624 Dlp Users Manual

Operation 41
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected and the projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is 
no equipment connected to the projector or no signal detected, limited menu items are 
accessible.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9...

Operation 42
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
TimerTimer period1~240 minutes
Timer displayAlways/1 min/2 min/3 min/Never
Timer positionTop-Left/Bottom-Left/Top-Right/
Bottom-Right
Timer counting 
directionCount Down/Count Up
Sound reminder On/Off
On/Off
Language
Projector PositionFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Blank TimerDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Panel Key Lock On/Off
Sleep TimerDisable/30...

Operation 43
5. 
SYSTEM 
SETUP: 
Advanced
Quick Cooling On/Off
High Altitude Mode On/Off
Audio SettingsMute On/Off
Volume
Power on/off ring 
toneOn/Off
Menu SettingsMenu display time5 sec/10 sec/15 sec/20 sec/25 
sec/30 sec
Menu positionCenter/Top-left/Top-right/Bottom-
right/Bottom-left
Standby D-Sub Output On/Off
Lamp SettingsLamp mode Normal/Economic
Reset lamp timer
Equivalent lamp hour
Security SettingsChange password
Power on lock On/Off
Baud Rate2400/4800/9600/14400/19200/
38400/57600/115200
Test...

Operation 44
Description of each menu
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Wall Color
 (Off)Corrects the projected picture’s color when the projection surface is 
not white. See Using Wall Color on page 33 for details.
Aspect Ratio
(Auto)There are four options to set the images aspect ratio depending on 
your input signal source. See Selecting the aspect ratio on page 31 for 
details.
Keystone
(0)Corrects any keystoning of the image. See Correcting keystone on 
page 30 for...

Operation 45
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Tint
(0)Adjusts the red and green color tones of the image. See Adjusting 
Tint on page 34 for details.The function is only available when Video or S-Video with NTSC 
system is selected.
Sharpness
(15)Adjusts the image to make it look sharper or softer. See Adjusting 
Sharpness on page 34 for details.
Brilliant Color
(On)Adjusts white peaking while maintaining correct color presentation. 
See Adjusting Brilliant Color on...

Operation
46
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Panel Key 
Lock
( Off ) Disables or enables all panel key functions except 
Power on the 
projector and keys on the remote control. See  Locking control keys 
on page 38  for details.
Sleep Timer
(Disable ) Sets the auto-shutdown timer. The ti
mer can be set to a value between 
30 minutes and 12 hours.
Splash Screen
(BenQ logo) Allows you to select which logo screen will display during projector 
start-up. Three options...

Operation 47
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Lamp Settings
Lamp mode (Normal)
See Setting Lamp mode as Economic on page 50 for details.
Reset lamp timer
See Resetting the lamp timer on page 54 for details.
Equivalent lamp hour
See Getting to know the lamp hour on page 50 for details on how 
the total lamp hour is calculated.
Security 
Settings
Change password
You will be asked to enter the current password before changing to a 
new one.
Power on lock (Off)
See...

Operation 48
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
FAQ-Image 
and 
Installation
Displays possible solutions to problems you may encounter.
FAQ-Features 
and Service
Current 
System Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has...

Maintenance 49
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular basis is 
to keep the lens clean.
Never remove any parts of the projector except the lamp. Contact your dealer if other parts 
need replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. 
• Use a canister of compressed air to remove dust. 
• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner...

Maintenance 50
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically 
calculated by the built-in timer. The method of calculating the equivalent lamp hour is as 
follows:
Total (equivalent) lamp hour
= 1 (hours used in Economic mode) + 4/3 (hours used in normal mode)
See Setting Lamp mode as Economic below for more information on Economic mode.
The lamp hour in Economic mode is calculated as 3/4 of that in Normal mode....